Jvm1850who2 Parts

Plugged it in Read more

Above the stove microwave took cover off microwave and checked all 4 thermals for continuity and they all passed put in new circuit board and the microwave was still dead went back to the thermals again and found cavity thermal had a blackened connector cut ends off wires and put together with wire nut and microwave worked put new connectors on wires and hooked up thermal tried microwave and it was dead thermal read continuity was good but thermal was bad replace with new thermal and wire... Read more

Follow the trio ubshooting flow chart inside of the microwave panel - and read articles on this website. Turned out to be a thermostat that had popped and gone bad. Replace the thermostat and it is good to go. Read more

I had to remove the microwave from the range and then remove the cover from the microwave to determine the exact problem. After a visual inspection then discharging the high voltage capacitor, I used a meter to test the high voltage diode and fuses. After using the meter to ohm out the magnetron, I removed it from the unit, and seeing that the hole in the end of the magnetron's tube was enlarged and burnt, as if it was arcing, I assumed it was the bad part. I ordered the parts from Appliance... Read more

Found a replacement stirrer motor from Appliance Parts Pros.com.The motor arrived in less than a week. I removed the old noisy motor and installed the new one. Placed a glass of water in the unit to test, and the new motor made it sound like brand new. The actual repair was quite simple. You just remove the grill on the top ,front of the unit. Take out the charcoal filter, remove the cover just under the filter( a single screw on the front is all that holds it in place. Unplugged the power... Read more

Removed noise filter and replaced with new one purchased at Appliance Parts Pros Read more

Thought it must be the motor so I replaced it which was very easy but did not cure the noise. Decided all that was left was to replace the ring even though I could not see anything wrong with it. Replaced ring problem solved Read more

My husband is the hero in this story. At this time in our lives we weren't looking to purchase another microwave. After 10 years at my company, due to a workforce reduction, my position was eliminated. He quickly realized it could be the fuse. We searched the microwave and the part on line and appliance part pros came up with the parts for our microwave. We needed the fuse and the fuse holder. For under $20 we were able to get the microwave working again. Thank you appliance part pros for... Read more

Replaced stirrer assembly, stirrer cover and button lock. into the stirrer assembly from loose stirrer cover and no button lock Apparently food spatter had gotten Read more

Replaced the door switches and latch body. it works like new again. Read more