Jvm300k002 Parts

The Thermostat is an OEM part for GE microwaves. It acts as a temperature-sensing component that monitors internal heat levels and provides feedback to electronic controls. 

Causes of thermostat failures can involve deterioration over extended use under intermittent high heat stresses.

Symptoms of a bad thermostat include:

• Inability to properly cook or reheat foods thoroughly  
• Temperature readings malfunction triggering errors
• Magnetron shutting off unexpectedly mid-cooking cycle
• Cook settings not functioning optimally  

This OEM GE replacement is compatible with Hotpoint, RCA and some Kenmore microwave models as well. 

This is the front control panel where you interact with the appliance. It replaces a cracked or worn panel so the display window and controls are properly supported, aligned, and easy to read.

• Houses and protects the display and user controls; provides the labeled interface surface
• Restores fit and appearance if the original panel is cracked, warped, or damaged
• Helps address loose/misaligned controls or gaps caused by broken mounting tabs
• Finish/style: black panel configured for units with white LED indicators

• Disconnect power at the breaker before servicing
• Remove knobs/buttons and perimeter screws; lift off the old panel carefully
• Transfer any brackets, clips, or trim from the original panel as required by your model
• Align the new panel and reinstall hardware; do not overtighten screws

This optional charcoal replacement filter helps reduce lingering food odors and improves interior air freshness in compatible refrigerators. Easy to swap in refrigerators that use an activated carbon air filtration cartridge. What it does:

• Adsorbs and helps reduce common refrigerator odors for a fresher-smelling interior
• Restores air freshness when stale or musty smells develop
• Works with refrigerators equipped with an activated carbon air filter system
• Serves as a direct replacement cartridge when the original filter is worn or saturated

• Remove packaging and slide or snap the new cartridge into the filter housing; secure per the manufacturer's instructions.
• Do not wash or soak the charcoal cartridge—replace when performance declines.
• Dispose of the used filter cartridge according to local regulations.

The white handle Assembly is an OEM part for GE built-in microwave oven models. It securely holds the door in place duraing cooking operations.  

Causes of failure include corrosion of metal mounting brackets from steam exposures over time, impact damages compromising structural integrity, as well as wear on plastic contact points reducing a secure closure.

Symptoms of a faulty handle assembly include:

• Loose door vulnerable to accidental opening during a cycle 
• Risk of steam burns if seal effectiveness is reduced
• Degraded aesthetic cohesion with surrounding cabinetry

This OEM handle assembly fits Hotpoint and RCA built-in microwaves.

This magnetron is the microwave's high-frequency energy source. Replacing a weak or failed tube restores consistent heating performance so food warms evenly and cook cycles complete properly.

• Generates the microwave energy that heats food
• Works with the transformer, capacitor, and diode in the high-voltage circuit
• Failure signs include: runs but does not heat, intermittent or weak heating, or a loud humming/buzzing noise

• Disconnect power; the high-voltage capacitor can retain a dangerous charge—discharge per service information before servicing
• Do not run the microwave with the cover removed
• Handle by the metal body; avoid touching or damaging the antenna/insulator. Secure mounting screws and reconnect terminals firmly
• After reassembly, test with a cup of water to ensure proper heating and fan operation

This control panel bracket supports and secures the user interface assembly to the appliance frame. Replacing a damaged bracket restores a solid, correctly aligned panel so buttons and display sit properly without flex, gaps, or rattles.

• Provides the structural mount for the control panel assembly
• Maintains proper alignment of keypad/display and surrounding trim
• Helps correct a loose, wobbly, or misaligned control panel
• Replaces brackets that are cracked, bent, or stripped at mounting points
• Reduces vibration or rattling noises from the panel area

• Disconnect power at the breaker or unplug before servicing; if working on a microwave, high-voltage components can retain a charge.
• Support the control panel when removing fasteners to avoid straining wire harnesses.
• Transfer any reusable clips, insulation, or screws from the original bracket.
• Avoid pinching harnesses.

This installation hardware kit provides the mounting fasteners and brackets needed to secure your appliance during installation, helping restore proper fit and stable operation. It's a small parts kit designed for use where OEM mounting components are required. What it does:

• Supplies the mounting screws, brackets and small hardware used to attach and level the appliance
• Replaces missing or damaged fasteners that can cause loose panels, gaps, or vibration
• Helps restore proper alignment to doors, panels or trim that rely on factory hardware
• Useful when reinstalling an appliance after servicing or moving

• One installation hardware kit

• Follow the appliance's OEM installation instructions and torque recommendations
• Disconnect power and water before starting work
• Keep small parts away from children and pets; use proper tools to avoid stripping screws

This safety cover protects internal wiring and components by enclosing delicate parts and helping prevent accidental contact. It restores a safe barrier and helps avoid shorting or debris buildup in the affected area. What it does

• Covers and protects wiring, connectors and nearby components from contact and debris
• Helps prevent accidental electrical contact and reduces risk of shorts where the cover is installed
• Commonly replaced when the original cover is cracked, melted, broken or missing
• Helps restore proper component spacing and secure mounting of nearby parts

• One safety cover

• Disconnect power to the appliance before servicing; verify it cannot be energized
• Remove panels or trim as needed to access the cover; keep fasteners for reinstallation
• Align mounting tabs or screw holes and secure with the original hardware
• If wiring or components show damage, replace or repair those items before reinstalling the cover

A small plastic retainer that secures the appliance control board in its housing to prevent movement and intermittent connections. Keeps the control board seated for reliable operation and reduces rattle or contact issues. What it does

• Holds the electronic control/PCB firmly in place inside the console or chassis
• Prevents board flexing that can cause loose connectors or intermittent faults
• Reduces vibration noise and rattling from a loose control board
• Helps maintain proper alignment for wiring harnesses and connectors

• One board latch (single retainer as shown)

• Disconnect power to the appliance before servicing to avoid shock or damage
• Remove the console or housing cover to access the control board; handle the board by its edges
• Snap the latch into the designated mounting posts until it securely engages the board

This high-voltage capacitor stores and releases the electrical energy needed by a microwave's high-voltage system so the oven can produce heat. It replaces a failed capacitor to restore reliable high-voltage performance. What it does:

• Stores high-voltage charge used by the magnetron to generate microwave energy
• Helps the oven reach and maintain proper cooking power
• Common symptom: microwave runs but does not heat
• Linked to blown high-voltage fuse or arcing inside the cavity

• One high-voltage capacitor

• Disconnect power and unplug the appliance before servicing
• Discharge the capacitor fully before touching terminals; it can hold a dangerous charge even when unplugged
• Use insulated tools and avoid touching leads
• Inspect associated high-voltage components (diode, transformer, fuse) and wiring when replacing the capacitor

This thermal fuse is a single-use overheat cutoff that interrupts power when temperatures exceed safe limits, helping protect the appliance from overheating and preventing further component damage. What it does:

• Opens the electrical circuit when excessive heat is detected to stop operation and reduce fire risk
• Commonly used in heating and cooling appliance circuits where temperature protection is required
• Helps isolate failed heating components by cutting power if a thermostat or heater malfunctions
• Serves as a safety device — once tripped it must be replaced to restore normal operation

• One thermal fuse

• Disconnect power to the appliance before attempting any service
• Replace only with the exact part number shown; do not bypass or jumper the fuse
• Install in the same orientation and mounting location as the original
• If the new fuse trips immediately, stop and diagnose the appliance to find the underlying fault

This noise filter helps reduce electrical interference on the appliance power line, protecting control electronics and improving operational stability. Replacing a faulty filter can reduce intermittent controls, audible buzzing, or interference with nearby electronics. What it does:

• Suppresses electrical noise on the incoming power line to help protect control boards and communications modules.
• Helps prevent symptoms such as intermittent operation, unexplained control resets, audible humming/buzzing, or radio/TV interference near the appliance.
• Installs in the appliance power circuit to filter line noise and reduce stray interference that can affect sensitive electronics.

• Always disconnect power to the appliance before servicing to avoid electric shock.
• Ensure secure wiring and a proper ground connection when installing the replacement filter.
• Handle the part carefully and avoid touching electronic contacts.
• Follow OEM instructions for placement and mounting.

This AC ventilation motor drives airflow for proper cooling and ventilation in compatible appliances, helping maintain safe operating temperatures and prevent overheating. Designed as a direct-replacement motor to restore fan operation. What it does:

• Spins the ventilation fan to move air through the appliance for cooling and ventilation
• Helps prevent overheating of components by restoring normal airflow
• Commonly used when fan won't run, is noisy, or airflow is weak
• Replaces a failed or intermittent motor to return reliable ventilation

• One replacement AC ventilation motor

• Disconnect power before servicing to avoid electrical shock
• Handle carefully and follow appliance disassembly steps in the service manual
• Verify wiring and mounting match the original motor before final assembly

The Control Panel Assembly is an OEM component specifically designed for GE wall oven microwaves. It is responsible for the user interface and all command functions of the microwave. This includes power controls, timer settings, start/stop buttons, and display functionality. 

Causes of a bad control panel can include damage from moisture, impact, or normal wear over time. The electronic components are also susceptible to failure through repeated use. 

Symptoms of a bad control panel include:

• Inoperative or unresponsive buttons  
• Inability to change settings
• Timer or display malfunctions
• Lights or diagnostic codes not working properly

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This nut assembly is a small mounting fastener that secures appliance components to studs or brackets, helping keep panels and internal parts stable for safe, quiet operation. What it does

• Secures components to threaded studs or bolts to prevent movement and vibration
• Restores proper fit of panels, trim, or internal assemblies when a worn or missing nut causes looseness
• Prevents electrical or mechanical contact caused by shifting parts
• Simple, durable replacement for a single mounting point

• Disconnect power to the appliance before servicing to avoid shock or injury
• Use the correct size wrench or socket to avoid rounding the nut; snug, not overly tight
• Verify the mating stud/bolt and threads are clean and undamaged before installation
• If other mounting hardware is corroded or damaged, replace all affected fasteners for a secure fit

This body latch assembly secures the appliance door during operation, restoring proper door closure and allowing cycles to start and run safely. It replaces a worn or broken latch to improve sealing and reliable door engagement. What it does:

• Physically latches the door to keep it closed during operation
• Prevents the appliance from starting when the door is not fully engaged
• Resolves symptoms like a door that won't stay closed, cycles that won't start, or intermittent door-sense errors
• Replaces worn, cracked, or damaged latch components that impair engagement

• Disconnect power (and gas, if applicable) before beginning any repair
• Remove outer door or access panel per OEM instructions to reach and replace the latch
• Handle plastic latch components carefully to avoid cracking; test door engagement before reassembling panels