Jvm6175e Parts

This factory glass panel replaces a cracked, shattered, or missing original, restoring a clean, safe cover/viewing surface on your appliance. It helps protect internal areas from splatter and keeps the assembly looking and fitting the way it should.

• Replaces a damaged glass component within the original assembly on applicable models
• Restores a clear, smooth surface for proper appearance and function
• Helps shield underlying parts from spills, grease, and debris
• Common symptoms: cracked or shattered glass, missing piece, sharp edges, looseness/rattling

• Disconnect power before servicing; allow all surfaces to cool
• Wear cut-resistant gloves and eye protection; handle edges carefully
• Support the panel/door during removal and installation to prevent stress on frames/hinges

This holder nut assembly secures a component to the appliance frame, restoring proper mounting and reducing vibration or movement. Replace a damaged or missing holder nut to keep connected parts stable and functioning. What it does:

• Secures a component or assembly to the appliance frame or mounting bracket
• Prevents looseness, rattling, and misalignment caused by worn or missing mounting hardware
• Restores a safe, stable connection that helps maintain normal operation
• Matches OEM mounting geometry for a direct replacement when the original nut is damaged

• Disconnect power to the appliance before servicing to avoid shock or injury
• Access the mounting area by removing the appropriate panel or cover per your model's service instructions
• Start threads by hand to avoid cross-threading, then tighten with the correct tool; do not overtighten
• If any fasteners or nearby components are damaged, replace them as needed for a secure installation

This cooktop lamp socket is the replacement holder that secures the cooktop bulb and provides the electrical connection so interior or surface lights work reliably. Restores proper bulb seating and electrical contact for safe lighting. What it does:

• Holds the cooktop light bulb in place and provides the electrical connection to power the lamp
• Re-establishes a secure contact if the original socket is loose, burned, or cracked
• Helps resolve symptoms like a bulb that flickers, won't stay lit, or fails to power on
• Compatible with standard cooktop light bulbs used in many GE cooktops

• One cooktop lamp socket

• Disconnect power to the appliance before servicing to avoid electric shock
• Inspect wiring and terminals for damage; replace any frayed or heat-damaged wires
• Securely seat the bulb and test operation before reassembling the cooktop

This TCO cavity is a thermal cutoff assembly that helps prevent oven overheating by interrupting power if temperatures get too high. It replaces a failed cutoff to restore proper temperature safety control. What it does:

• Acts as a temperature safety device that opens the circuit when excessive heat is detected
• Helps prevent overheating-related damage or fire risk when operating the oven
• Common symptom: oven or burner stops heating or cycles off unexpectedly
• Common symptom: oven will not maintain set temperature or complete heating cycles

• Disconnect power to the appliance before servicing to avoid electrical shock
• Replace with the exact part number; follow OEM wiring and mounting orientation
• Inspect surrounding wiring and insulation for heat damage; replace if frayed

A temperature sensor assembly that monitors internal temperatures and sends readings to the appliance control so the unit can maintain proper heating or cooling. Replacing a failed sensor restores accurate temperature regulation and consistent performance. What it does

• Detects and reports temperature to the electronic control or thermostat
• Helps the appliance maintain set temperatures for consistent operation
• A faulty sensor can cause inaccurate temperature readings or uneven heating/cooling
• May trigger temperature-related error codes or put the unit into a diagnostic/fail-safe mode

• Disconnect power to the appliance before attempting any repair
• Handle the sensor and its wiring gently; avoid bending or damaging the sensing tip or connectors
• Reconnect wiring securely and confirm correct routing to prevent interference with moving parts

This microwave high-voltage transformer steps household AC up to the high voltage required by the magnetron to generate microwave energy. Replacing a failed transformer restores heat when the oven runs but food remains cold.

• Steps up line voltage to supply the magnetron during cooking
• Common symptom of failure: microwave runs but does not heat
• May also cause loud humming, a burning odor, or tripped breaker/fuse when energized
• Visual signs can include scorching or discoloration on the windings or terminals

• Disconnect power; the high-voltage capacitor can retain a dangerous charge—discharge it before servicing
• High-voltage microwave repairs are hazardous
• Note wire positions and mounting orientation before removal; transfer any brackets or insulators as configured
• Secure with original hardware and verify all connections are tight and routed clear of heat or moving parts

The Magnetron Thermal Cut Off is an OEM part for GE microwave ovens. It is a safety component that protects the magnetron tube from overheating.

Symptoms of a bad magnetron thermal cut off include:

• Inability to heat or cook food  
• Repeated blowing of fuses or tripping of circuit breakers
• Magnetron tube failure due to lack of overheat protection

Causes can be wearing out of the component over many heating and cooling cycles. 

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore microwave models. 

This safety cover protects internal wiring and components by enclosing delicate parts and helping prevent accidental contact. It restores a safe barrier and helps avoid shorting or debris buildup in the affected area. What it does

• Covers and protects wiring, connectors and nearby components from contact and debris
• Helps prevent accidental electrical contact and reduces risk of shorts where the cover is installed
• Commonly replaced when the original cover is cracked, melted, broken or missing
• Helps restore proper component spacing and secure mounting of nearby parts

• One safety cover

• Disconnect power to the appliance before servicing; verify it cannot be energized
• Remove panels or trim as needed to access the cover; keep fasteners for reinstallation
• Align mounting tabs or screw holes and secure with the original hardware
• If wiring or components show damage, replace or repair those items before reinstalling the cover

A small plastic retainer that secures the appliance control board in its housing to prevent movement and intermittent connections. Keeps the control board seated for reliable operation and reduces rattle or contact issues. What it does

• Holds the electronic control/PCB firmly in place inside the console or chassis
• Prevents board flexing that can cause loose connectors or intermittent faults
• Reduces vibration noise and rattling from a loose control board
• Helps maintain proper alignment for wiring harnesses and connectors

• One board latch (single retainer as shown)

• Disconnect power to the appliance before servicing to avoid shock or damage
• Remove the console or housing cover to access the control board; handle the board by its edges
• Snap the latch into the designated mounting posts until it securely engages the board

This high-voltage capacitor stores and releases the electrical energy needed by a microwave's high-voltage system so the oven can produce heat. It replaces a failed capacitor to restore reliable high-voltage performance. What it does:

• Stores high-voltage charge used by the magnetron to generate microwave energy
• Helps the oven reach and maintain proper cooking power
• Common symptom: microwave runs but does not heat
• Linked to blown high-voltage fuse or arcing inside the cavity

• One high-voltage capacitor

• Disconnect power and unplug the appliance before servicing
• Discharge the capacitor fully before touching terminals; it can hold a dangerous charge even when unplugged
• Use insulated tools and avoid touching leads
• Inspect associated high-voltage components (diode, transformer, fuse) and wiring when replacing the capacitor

This fan motor spins the oven/convection fan to circulate heat for even cooking and help exhaust hot air. Replaces a worn or noisy motor to restore proper airflow and temperature consistency in the appliance. What it does:

• Drives the convection/circulation fan blade to move air through the oven cavity
• Helps maintain even cooking and consistent oven temperatures
• Reduces buzzing, grinding, or failure-to-spin symptoms when the old motor is failing
• Works as the mechanical drive for air exhaust and internal circulation systems

• Disconnect power to the appliance before servicing to avoid electrical shock
• Handle the motor and wiring gently; match mounting orientation and connector type during install
• Verify blade and shroud clearance before powering the unit

This body latch assembly secures the appliance door during operation, restoring proper door closure and allowing cycles to start and run safely. It replaces a worn or broken latch to improve sealing and reliable door engagement. What it does:

• Physically latches the door to keep it closed during operation
• Prevents the appliance from starting when the door is not fully engaged
• Resolves symptoms like a door that won't stay closed, cycles that won't start, or intermittent door-sense errors
• Replaces worn, cracked, or damaged latch components that impair engagement

• Disconnect power (and gas, if applicable) before beginning any repair
• Remove outer door or access panel per OEM instructions to reach and replace the latch
• Handle plastic latch components carefully to avoid cracking; test door engagement before reassembling panels

The Thermostat is an OEM part for GE  microwaves. It monitors the temperature inside the microwave during operation.

Causes of a bad thermostat can be simply wear and tear over time. Exposure to spills, dirt, or dust can also cause issues.

Symptoms of a bad microwave thermostat include:

• Food not heating evenly or completely
• Longer than normal cook times needed
• Error messages related to abnormal temperatures
• Potential overheating issues or damage due to lack of temperature control

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This thermostat with bracket replaces the temperature control switch that senses and helps regulate appliance temperature, restoring proper cycling and temperature response. It provides a direct-fit mounting bracket for secure installation. What it does:

• Senses internal temperature and signals the control system to start or stop cooling/heating
• Helps maintain consistent temperature by cycling compressor or heating elements
• Common symptoms this can address: unit not cooling consistently, runs constantly, or compressor cycles on and off quickly
• Works as the mechanical/electrical interface between the appliance and its temperature control circuitry

• One thermostat and one mounting bracket

• Disconnect power to the appliance before beginning any repair to avoid shock or injury
• Handle terminals and wiring carefully; note wire locations or take a photo before disconnecting
• Mount the bracket securely and verify the thermostat is positioned to sense temperature as OEM directed
• Test the thermostat for continuity with a multimeter

A thermostat assembly with mounting bracket that regulates oven temperature for accurate cooking. Replaces a failed temperature control component to restore proper heating behavior and oven cycling. What it does:

• Senses and controls oven temperature to maintain set cooking temperature
• Helps prevent oven from running too cool or failing to reach temperature
• Common replacement for temperature-related heating or cycling issues
• Works as the control interface between the oven's heat source and thermostat circuitry

• One thermostat assembly with mounting bracket

• Disconnect power to the appliance before starting any repair
• Handle the capillary/temperature sensor carefully; avoid kinking or bending sharply
• Verify proper orientation and secure bracket mounting for accurate temperature sensing

This nut assembly secures an appliance component to its mounting point, restoring a solid connection and preventing unwanted movement. Replace a damaged or missing nut to stop rattling and keep parts aligned for reliable operation. What it does:

• Fastens a panel, bracket or component to its mounting stud or bolt to maintain proper alignment.
• Restores a secure connection when the original nut is stripped, corroded or missing.
• Helps stop rattling, looseness or parts that won't stay in place.
• Works as a direct replacement to restore proper fit and function.

• Disconnect power (and water if applicable) before beginning any repair.
• Use the correct-size socket or wrench; avoid cross-threading when installing.
• Tighten snugly but do not overtighten — replace mating hardware if threads are damaged.