Kbs755obo Parts

This spark module controls the ignition sparks for gas range burners so they light reliably when you turn the knob. It replaces a failed ignition control to restore safe, consistent spark delivery for burner lighting. What it does:

• Sends high-voltage sparks to the range burner igniters when a burner knob is turned
• Helps ensure burners light quickly and consistently
• Works with the range's safety interlocks to prevent continuous sparking

• Disconnect the appliance from power and shut off the gas supply before beginning work
• Handle the module and wiring harness carefully; avoid pulling on wires—disconnect plugs only
• Verify wire locations or take a photo before removal to ensure correct reinstallation

This ice container stores and holds ice produced by the freezer icemaker, keeping cubes contained and ready to dispense or scoop. Replacing a damaged or missing bin restores proper ice storage and prevents spills. What it does:

• Collects and holds ice made by the icemaker so cubes stay contained
• Positions under the icemaker to catch and retain falling ice
• Prevents ice from scattering in the freezer compartment
• Helps keep ice accessible for dispensing or scooping

• Disconnect power to the appliance before servicing to avoid injury.
• Remove the old bin by sliding it out; lift straight up if clips are present.
• Seat the replacement bin fully under the icemaker or in the bin rails so it catches ice properly.
• Wash the new bin in warm, soapy water and dry before first use.

This Support (mounting bracket) secures internal components and stabilizes the appliance's assembly to help prevent sagging, misalignment and excess vibration. It's a small replacement that restores proper fit and reduces rattling. What it does:

• Provides a stable mounting point for panels or internal assemblies
• Keeps components aligned to prevent binding or wear
• Reduces noise caused by loose or sagging parts
• Helps stop intermittent contact or rubbing that can cause rattles

• Disconnect power (and water, if applicable) before servicing
• Access may require removing outer panels or trim; keep track of fasteners
• Support the assembly while replacing the bracket to avoid strain

This ice stripper arm is the small harvest component that helps remove ice from the ice maker mold and guide cubes into the bin, restoring proper harvesting and ice release. It's a direct-fit replacement designed to match the OEM shape and function. What it does:

• Strips ice cubes from the ice maker mold during the harvest cycle so cubes drop into the bin
• Guides released cubes away from the mold to prevent jams and refreezing
• Replaces worn, cracked or broken stripper arms that can cause incomplete harvests
• Works as part of the ice maker's harvesting mechanism to help ensure consistent ice delivery

• One ice stripper arm

• Disconnect power to the appliance before attempting any repair
• Remove the ice maker per the manufacturer instructions to access the stripper arm
• Inspect mounting points and the ice maker for additional wear; align and snap the new arm into place

This heater clamp secures a heating element in the correct position within the appliance. Proper support keeps the element stable so it operates quietly and melts frost as designed for consistent, reliable performance.

• Holds the heater firmly in place to maintain correct alignment
• Reduces movement and vibration that can cause noise or wear
• Helps promote even frost melt during defrost for steady cooling
• Symptoms of a damaged or missing clamp can include recurring frost/ice buildup, a heater out of position, or rattling from the freezer area

• Disconnect power before servicing; wear cut-resistant gloves
• Access the heater/evaporator by removing the freezer panel as applicable
• Note the original clamp orientation and routing before removal
• Use needle-nose pliers to install; avoid damaging evaporator fins and do not deform the heater—position it exactly as originally placed

The Midnight Grey Appliance Touchup Paint is an OEM touchup paint that is specifically designed for use with Whirlpool appliances. It is the perfect solution for covering up any scratches, chips, or blemishes on the surface of your appliance, restoring its original appearance. 

Causes of scratches or chips on your appliance's surface can include accidental impacts, wear and tear over time, or mishandling. These imperfections can not only affect the aesthetic appeal of your appliance but also leave it vulnerable to further damage.

Symptoms of a damaged appliance surface include:

• Visible scratches or chips
• Discoloration or uneven appearance
• Exposed metal or other materials

Restore your appliance by using this genuine OEM touchup paint to cover up any imperfections. Simply apply to the affected area and let it dry for a flawless finish.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

This installation kit provides the mounting hardware needed to install and secure the associated appliance component, helping ensure a stable, properly fitted installation and reducing movement or loose connections. What it does:

• Contains the hardware pieces used to fasten and position the component during installation
• Helps secure the component to the appliance frame or mounting points
• Reduces vibration and movement that can cause noise or misalignment
• Supports a correct fit that helps prevent loose connections

• Disconnect power to the appliance and shut off water or gas lines before starting.
• Follow the appliance manufacturer's installation instructions and diagrams for correct placement and torque.
• Use appropriate hand tools; do not overtighten fasteners to avoid stripping or damage.
• Inspect included parts for damage before installing and replace any damaged items.

This regulator controls the gas pressure supplied to the oven/range burner assembly to help maintain consistent flame and proper cooking temperatures. Replacing a worn regulator restores reliable ignition and steadier burner performance. What it does:

• Regulates gas pressure to the oven/range burner system so burners maintain consistent flame height
• Helps ensure reliable ignition and steady cooking temperatures
• Commonly linked to low or uneven flames, slow or failed ignition, and poor oven heating
• Works as part of the gas delivery system between the supply line and valve assembly

• One regulator

• Turn off gas supply and electrical power to the appliance before starting work
• Replace only with the exact OEM part; verify fit and orientation before final connections
• After installation, check all gas fittings for leaks with a soap solution or approved leak detector

6 - 19 x .250

Front left hand side

Left hand side

This screw support secures the dryer drum ladder assembly, helping maintain proper alignment and stable rotation for reliable drying performance. It replaces a worn or broken support to reduce noise and rattling during operation. What it does:

• Holds the ladder/support bracket in place so the drum rotates smoothly.
• Prevents excessive movement that can cause scraping, knocking, or rubbing noises.
• Restores correct positioning to reduce wear on adjacent components.
• Suitable when the original support is cracked, bent, or missing fastener points.

• One screw support (ladder) as shown.

• Intended for experienced DIYers; confirm compatibility with your model before installing.
• Disconnect power (unplug electric or shut off gas and unplug) before beginning work.
• Handle small parts carefully and keep track of fasteners; use appropriate hand tools.