Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Float for overfill protection.
Local appliance repair company quoted over $800 parts and labor to repair. Said parts AP6014094/WP9761566 (Membrane) and AP6016433/WPW10181439 (Electronic Control Board) were needed to fix. Bought both parts from AppliancePartsPro, installed in less than 30 minutes, but did not fix the problem. Using APP's website information bought the ribbon wire (AP6015869/WPW10155291) and Harns Wire (AP3892247/9762921). Reinstalled the old membrane and control board, replaced ONLY the ribbon, and the error... Read more
I removed the lower door panel and kickplate (4 screws) to access the door springs. Replaced the door springs by hand. The nylon guides, through which the door guides travel, were easy to replace. I removed the broken ones and snapped in the new ones. I recommend a drop of epoxy on the upper portion of each guide to keep it from shifting. The impact on the door apparently distorted the frame slightly so the door drops slightly below level when fully opened and the lower rack movement is impeded... Read more
Replaced seal around tub which matches up to the door. Note: Once you receive the replacement seal/gasket you will be able to see how the gasket is attached to the tub. I used a firm flat blade scraping putty knife to depress the clips....once you receive the gasket you'll understand what I'm referring to. Read more
This is a dishrack only it no longer includes the rollers and or axles. Color: light gray. Measures about 21 inches wide by 4 inches high by 22 inches deep. For axles order 4162321, for rollers order WP4162322, order 8 of each for complete set.
I ordered a new rack. I carefully detached the old wheels, hubs and splash guards. I cracked one hub but it reinstalled ok. I cleaned the old parts and installed them on the new rack. Presto, chango new complete rack! Read more
Size: 8-18 x 3/8 inch.
I'm no repair expert, but this looked like a really easy job, but it wasn't. It took about 1.5 hours. You have to remove the oven from the wall to do the job. After you remove the back panel it's pretty self explanatory. I had some difficulty getting the back panel to fit properly. Patience and persistence. I suggest taking a photo of the panel before you remove it to help. In the end it's all together and working fine. Read more