Kdte104dss0104ess Parts

This air inlet damper controls cold-air flow from the freezer into the refrigerator compartment to help maintain proper fresh-food temperatures. Replacing a faulty damper restores balanced airflow and more consistent cooling. What it does:

• Regulates the amount of cold air entering the fresh-food section from the freezer.
• Opens and closes as the fridge cycles to maintain set temperatures.
• Commonly replaces stuck, broken, or noisy dampers that cause uneven cooling.
• Often used when the refrigerator is warm while the freezer remains cold or when temperatures fluctuate.

• Disconnect power to the appliance before starting any repair.
• Remove interior panels or grille per your model's service instructions to access the damper; keep screws and clips organized.
• Handle plastic fins and actuator gently to avoid damage; do not force the damper into position.
• Reconnect power and verify damper operation and temperature regulation after installation.

This spacer positions and supports the appliance tank/tub assembly to maintain proper alignment and spacing for reliable operation. Replaces a worn or damaged spacer to restore correct fit and reduce movement. What it does:

• Keeps the tank/tub assembly correctly spaced and aligned with the cabinet and mounting points
• Helps prevent rubbing, binding, and excess vibration caused by a missing or damaged spacer
• Restores proper clearance to support seals and hoses that rely on correct tank positioning
• Useful when reassembling the appliance after service or repair

• One spacer

• Disconnect power and water supply before starting any repair
• Access may require removal of outer panels, console, or access covers depending on model
• Handle parts carefully to avoid damaging surrounding seals and wiring; reuse fasteners unless replacement is specified

This wire harness routes power and signals between the appliance's control components and motors, switches, and sensors to restore reliable electrical connections. Replacing a damaged harness returns proper circuit routing and connection integrity. What it does

• Connects control board outputs to motors, switches, sensors, and other electrical components
• Restores broken, frayed, or corroded wiring that can cause intermittent or no operation
• Helps eliminate faults caused by loose or damaged connectors and open circuits
• Supports normal communication between components so controls can operate correctly

• One replacement wire harness as shown

• Disconnect power at the breaker or unplug the appliance before starting any work
• Compare the new harness to the original for connector type, length, and terminal locations before installation
• Route wiring away from sharp edges and moving parts; secure with existing clips or ties

The Door Hinge (RH) is an OEM replacement part for Whirlpool dishwashers. This hinge is installed on the right-hand side of the dishwasher door, allowing it to open and close smoothly while maintaining the proper tension and alignment. The hinge plays a crucial role in ensuring the door seals securely during operation, preventing leaks and enabling efficient cleaning performance.

Common causes include regular use leading to wear and tear, accidental impacts, or exposure to moisture, which can contribute to rust or corrosion.

Symptoms of a bad door hinge include:

• The dishwasher door not closing completely
• Difficulty opening or closing the door
• A sagging or misaligned door
• Unusual noises when moving the door

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Thermostat Housing is an OEM part for Whirlpool dishwashers. It encases the thermostat responsible for accurately monitoring water temperatures throughout cleaning cycles. 

Symptoms of a faulty housing include:

• Inconsistent or improper water heating  
• Delayed or incomplete cycles from temperature control issues
• Error codes or failure detection by the control board

Causes may involve cracks allowing steam penetration, loose mounting points compromising seals, or damaged seals leaking interior thermostat components. 

This OEM replacement fits Whirlpool, KitchenAid, Jenn-Air, and some Kenmore models as well.

This is the replacement lid for select top-load washers. It restores a secure, properly aligned cover so the lid closes and the lock/strike can engage, allowing cycles—especially spin—to run safely while helping contain splashes.

• Covers the wash basket and helps contain water splashes during operation
• Provides proper alignment for the lid lock/strike to engage
• Replaces cracked, warped, or broken lids
• May help with: lid won't close/latch and cycles that won't start or won't spin because the lid isn't closing

• Unplug the washer before servicing
• Support the lid and remove hinge screws/pins carefully to prevent damage
• Transfer existing hinge hardware and the lid strike from the old lid if your model uses them
• After installation, close the lid to verify smooth closure and lock engagement before running a cycle

This support bracket helps hold internal components in place to restore proper alignment and reduce movement. It's a simple replacement that stabilizes the affected assembly and helps stop rattling or sagging. What it does:

• Secures and supports a loose or misaligned internal component or panel
• Prevents shifting that can cause vibration, noise, or uneven operation
• Restores proper alignment to reduce wear on adjoining parts
• Functions as the OEM replacement for the original support bracket

• One support bracket

• Inspect the mounting points and surrounding parts for wear before installing
• Replace only with the matching OEM part number to ensure fit; fasten securely per manufacturer torque recommendations
• Disconnect power and follow basic safety precautions before servicing the appliance

This 9/32" ratcheting retainer secures mating components in place, providing a reliable spring-lock connection that resists loosening from vibration. Use it to restore proper fit where the original retainer has worn or broken. What it does:

• Holds shafts, rods, or assemblies securely in position using a ratcheting/spring clip action
• Prevents side-to-side movement and reduces rattling or misalignment
• Commonly replaced when the original clip is bent, cracked, or no longer grips tightly
• Works as a direct-fit replacement to restore intended component retention

• Basic hand tools may be required; handle the clip carefully to avoid pinching
• Wear eye protection—spring clips can release suddenly during removal/installation
• Ensure mating parts are aligned before seating the retainer for a secure fit
• If other fasteners or damaged parts are found, inspect and replace as needed

This thermostat bracket secures the refrigerator/freezer temperature sensor or thermostat to the cabinet, keeping the sensor in the correct position for accurate temperature control. Durable replacement for factory mounting hardware. What it does:

• Holds the thermostat/temperature sensor in place so it reads interior temperatures correctly
• Helps prevent loose or misaligned sensors that can cause irregular cooling or cycling
• Restores proper sensor positioning after damage or broken mounting clips
• Works with the thermostat assembly to maintain consistent appliance operation

• One thermostat mounting bracket

• Disconnect power to the appliance before service to avoid electrical shock
• Handle thermostat/sensor elements carefully; avoid bending or pinching the sensing tube
• Retain or reuse original fasteners unless replacement hardware is explicitly included

This control panel is the console assembly that houses the appliance's user interface and controls, restoring button access and display feedback for normal operation. It replaces a damaged or unresponsive console so you can select cycles and options reliably. What it does:

• Provides the touch/button interface and display functions used to select cycles and settings
• Routes user commands to the appliance's control electronics so cycles start and respond
• Addresses symptoms like unresponsive buttons, blank or erratic display, or controls that won't accept inputs
• Acts as the physical mounting and connection point for the console's wiring harness

• Disconnect power to the appliance before starting any work to avoid shock or injury
• Installation typically requires removing the front console or top panel and unplugging the wiring harness
• Handle the panel and any display window carefully to avoid scratching or cracking

The Dishwasher Door Seal is an OEM replacement part for Whirlpool dishwashers. It provides a tight seal around the dishwasher door to prevent water, sound, and heat from escaping during the wash cycle. Measuring 71” in length (and stretching up to 75”), this door seal prevents water from leaking out during wash cycles.

Causes of a bad seal can include cracks, tears, or splits that develop due to regular use and age. Damage may also occur from over-tightening of the door or accidental impact.

Symptoms of a bad dishwasher door seal include:

• Water or moist air leaks around the door during a cycle  
• Higher energy bills due to hot air escaping
• Excess moisture or mineral deposits around the door seal area
• Food particles or debris trapped under a torn seal

This genuine OEM Whirlpool replacement seal is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This connector links mating components within the appliance to create a secure, reliable connection. Replacing a cracked or loose connector helps restore consistent operation and prevent intermittent issues caused by poor contact or separation. What it does:

• Creates a stable connection between mating parts or harnesses in the appliance
• Helps prevent looseness or separation that can disrupt performance
• Direct replacement for broken, brittle, or deformed connectors
• Can resolve intermittent operation traced to a poor connection at this junction

• 1 connector

• Disconnect power and, if applicable, shut off water before servicing
• Note orientation and positions before removal to ensure correct reassembly
• Seat the connector fully until any locking features engage; do not force
• Inspect mating parts for wear or damage and replace if necessary