Kdte204kps Parts

The Lower Door Seal Assembly is an OEM part for Whirlpool dishwashers. As a key component, this seal is designed to create a tight barrier between the door interior and tub during wash cycles. The pliable rubber seal provides a sturdy gasket to block water, detergent, and sound.

Causes of failure involve mineral buildup, cracks from repeated use, or degradation of adhesive over time compromising the seal. 

Symptoms of a faulty seal assembly include: 

• Puddles or leaks from beneath the door frame
• Higher water consumption or longer cycles   
• Increased noise levels during operation

This OEM Whirlpool replacement is also compatible with select KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, and other brands.

The Dishrack Stop Clip is an OEM component specifically designed for Whirlpool brand dishwashers. This clip functions to hold the upper dish rack in place during washing cycles.

Symptoms of a bad dishrack stop clip can include:

• Movement or vibration of the upper dish rack during washing
• Visible damage, bending or broken tabs on the mounting clip itself  
• Inability to smoothly slide or remove the upper dish rack

Causes of a bad dishrack stop clip usually stem from normal wear and tear over extended use. Overtight loading of dishes could also put excessive stress on the clip.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

Replacement door hinge designed to restore proper alignment and smooth opening for compatible refrigerator doors. Replaces worn or damaged hinges to reduce sagging, rubbing, and uneven closing for better seal and operation. What it does:

• Supports and pivots the refrigerator door for smooth opening and closing.
• Restores correct door alignment to improve gasket contact and cold-air seal.
• Stops door sag, uneven gaps, or rubbing against the cabinet.
• Helps eliminate noisy or stiff door movement caused by a worn hinge.

• Disconnect power to the appliance and remove food from the door area before starting.
• Support the door securely while removing and installing the hinge to prevent dropping or damage.
• Reuse original fasteners only if undamaged; replace any stripped or corroded hardware.

The Float Switch is an OEM part for Whirlpool dishwashers. It is a safety component that detects water levels and monitors flood conditions. The float switch ensures the dishwasher only runs water when needed and shuts off water flow if it detects a potential leak or overflow situation. 

Symptoms of a bad float switch include: 

• The dishwasher fails to fill with water or stop the water when the cycle is complete
• Loud buzzing or humming noises coming from the float switch area  
• Water leaks inside or outside of the dishwasher due to overfilling
• Repeated error codes related to flooding or water level detection

Causes of a bad float switch could be wear and tear over time, defective wiring or electronic components inside the switch, or damage from moisture or leaks. 

This OEM replacement is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Dishwasher Plate-Latch Strike is an OEM part for Whirlpool dishwashers. It is a part that holds the dishwasher door shut during wash cycles. Precise alignment of the strike allows for tight sealing and proper engagement with the door latch.

Causes may arise from normal wear over lengthy use, deformations from repetitive door actions, or incidental damage.

Symptoms of a bad strike can include:

• Door that feels loose and doesn't fully latch closed
• Gaps seen around the door sealing surface
• Water leaks or insufficient drying performance
• Difficulty fully closing or reopening the door

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Lower Dishrack Roller Assembly is an OEM part for Whirlpool dishwashers. As an integral component, the lower dishrack roller assembly supports smooth movement and positioning of the lower dishrack. Its precision ball bearings allow for effortless extension and retraction of the lower rack.

Causes of a bad lower dishrack roller assembly can include wear and tear of bearings over time, stripped or damaged rails, or failure of rollers due to excessive loading.  

Symptoms of a bad lower dishrack roller assembly include:

• Difficulty extending or retracting the lower dishrack  
• Noisy or stuck operation of the lower rack
• Rack failing to remain securely in place during wash cycles
• Dishes shifting or falling during wash due to uneven support

This OEM Whirlpool part is also compatible with KitchenAid, Jenn-Air, Amana, Kenmore, and some Maytag and GE dishwashers. 

This heater terminal nut fastens the heating element stud on the outside of the tub, keeping the element seated and stable during wash and dry cycles. Replace if the original nut is missing, stripped, or corroded.

• Secures the heating element terminals to the tub exterior
• Maintains proper element position for consistent, reliable operation
• Direct replacement for a worn, missing, or rusted element terminal nut
• Common signs: loose heating element at the tub wall, rattling from the lower area, or visible damage/corrosion on the nut

• Safety first: Disconnect power at the breaker and allow the element to cool before servicing.
• Access the heater terminals from beneath the unit by removing the toe panel or carefully sliding the dishwasher out.
• Support the terminal stud and wiring while loosening/tightening to avoid twisting or stressing the element.
• Tighten snugly without overtightening; run a brief test cycle to confirm proper operation.

The Vent Gasket is an OEM part for Whirlpool dishwashers. It is responsible for sealing the vent area of the dishwasher, preventing any leaks or air gaps that could compromise the efficiency of the appliance.

A bad vent gasket can be caused by wear and tear, exposure to high temperatures, or damage due to food debris or cleaning agents. If you notice water leakage or steam escaping from the vent area, it may indicate a problem with the vent gasket.

Symptoms of a bad vent gasket include:

• Water leakage or drips from the vent area
• Steam escaping from the vent during operation
• Moisture remaining on dishes after a cycle
• Increased noise levels coming from the vent area

Replace your faulty vent gasket with this genuine OEM part to restore your dishwasher. 

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

The Cap is an OEM part for Whirlpool brand built-in dishwashers. Located on the outer tub, it protects electronic boards and seals the detergent dispenser opening. 

Causes of cap failure can include cracking or warping from prolonged exposure to heat and cleaning chemicals within the dishwasher environment.

Symptoms include: 

• Leaks or moisture ingress at the detergent dispenser entry point
• Error codes relating to electrical components beneath the cap  
• Loose or missing securing clips failing to maintain a watertight seal

This Whirlpool replacement restores critical protection of internal parts. For Whirlpool, KitchenAid, and some Kenmore models, it prevents costly repairs down the line. 

The Power Cord is an OEM part for Whirlpool dishwashers. This kit provides you with all the necessary parts to safely and effectively connect your dishwasher to the power source. The kit includes one power cord with a right angle head, one grommet, and one metal strain relief. The power cord with a right angle head allows for easy installation and helps to prevent excessive bending or damage to the cord.  

A bad power cord can occur due to wear and tear, exposure to heat or moisture, or accidental damage. If you notice symptoms such as intermittent power supply, sparks or electrical arcing, or a loose connection, it may be time to replace the power cord kit.

Symptoms of a bad power cord include:

• Intermittent power supply
• Sparks or electrical arcing
• Loose connection

Restore your Whirlpool dishwasher by replacing the faulty or damaged power cord kit with this genuine OEM part.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

This factory hardware nut secures threaded components inside your appliance, keeping parts tight and properly aligned during operation. Replace a stripped, corroded, or missing nut to restore a solid connection and prevent looseness or noise.

• Threads onto a matching bolt or stud to clamp parts together securely
• Helps maintain clamping force under vibration when properly tightened
• Replace if threads are worn, rounded, cracked, or rusted
• Symptoms can include loose or rattling parts, misalignment, or a fastener that won't tighten; in sealed water-path locations, leaks may occur

• Disconnect power; shut off water and/or gas before service
• Hand-start the nut to avoid cross-threading; finish tightening with the proper tool
• Do not overtighten; follow model-specific torque guidance if available
• Inspect the mating bolt/stud and any seals or washers during reassembly; replace if damaged

The Power Cord is an OEM part for Whirlpool dishwashers. This kit provides you with all the necessary parts to safely and effectively connect your dishwasher to the power source. The kit includes one power cord with a right angle head, one grommet, and one metal strain relief. The power cord with a right angle head allows for easy installation and helps to prevent excessive bending or damage to the cord.  

A bad power cord can occur due to wear and tear, exposure to heat or moisture, or accidental damage. If you notice symptoms such as intermittent power supply, sparks or electrical arcing, or a loose connection, it may be time to replace the power cord kit.

Symptoms of a bad power cord include:

• Intermittent power supply
• Sparks or electrical arcing
• Loose connection

Restore your Whirlpool dishwasher by replacing the faulty or damaged power cord kit with this genuine OEM part.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This upper rack adjuster mounts on the right side of the dishwasher's rack system. It lets you raise or lower the rack and keeps it level so you can load taller items and maintain consistent spray coverage.

• Controls upper rack height and alignment on the right side
• Helps the rack glide evenly and stay locked at the selected height
• Replace if the rack won't adjust, sits uneven, drops, or the adjuster teeth/lever are cracked
• Noise, binding, or a loose rack on one side can indicate a failed adjuster

• Disconnect power and shut off water to the dishwasher
• Remove the upper rack (release end caps and slide the rack out)
• Swap the damaged adjuster for the new one; transfer any reusable clips or hardware from the original part as needed
• Reinstall the rack and verify smooth travel and height adjustment before restoring power and water

The Inner Door Vent is an OEM part for Whirlpool dishwashers. It plays an important role in moisture removal by allowing airflow out of the dishwasher during operation. Proper ventilation is important for the drying performance and prevention of mold growth.

Causes of a bad inner door vent can be cracks, breaks or deformities restricting airflow. This may occur due to normal use over years of use or accidental impact damage.

Symptoms of a bad inner door vent include:

• Dishes not drying fully
• White film residue left behind
• Mold or mildew growth inside machine
• Poor ventilation causing increased drying times

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Dishwasher Drip Tray is an OEM part for Whirlpool dishwashers. It collects excess water and rinse aid during the wash and rinse cycles, protecting internal components from exposure to liquids. As a critical part, the drip tray supports smooth drainage and prevents puddling inside the dishwasher.

Symptoms of a bad drip tray can include:

• Puddling or pooling of water inside the dishwasher tub
• Leaks onto the floor over time from the drainage area
• Water marks or corrosion of internal surfaces
• Improper drainage of water after cycles 

Causes of a bad drip tray may be cracks, leaks, or damage to the drainage channels over time. Failure could also result from mineral buildup blocking proper drainage.

This OEM Whirlpool part is also compatible with Maytag, Jenn-Air, Amana, some KitchenAid, and select Kenmore dishwasher models.