Kdte254ess Parts

The Drain Hose is an OEM part for Whirlpool built-in dishwashers. As the tube removes wastewater after each cycle, it plays a key part in sanitizing dishes. 

Causes of a bad Drain Hose can include mineral deposits inside over many years reducing flow. Cracks may also form from constant flexing as it transport water to the garbage disposer or sink drain.

Symptoms of a bad drain hose include:

• Puddles or pooling inside the dishwasher 
• Incomplete drainage leaving residue on dishes
• Leaks around hose connections

This genuine Whirlpool replacement is compatible with brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore too. 

The Wire Harness is an OEM part for Whirlpool built-in dishwashers. Serving as the internal electrical backbone, this harness safely routes current through a protective casing between key components. Strategically placed grommets prevent wire abrasion and breaks from continuous motion.  

Causes of harness issues can include cracked insulation, severed wires developing from long-term vibration, imperfect installation exposing wires to potential damage, or physical stress like pinching during repairs.

Symptoms of a bad wire harness include: 

• Modules and lights failing to power on reliably
• Error codes flashing or cycles not fully completing
• Inability to maintain set wash temperatures
• Loud grinding noises emitted from the pump motor

This OEM replacement ensures stable, grounded connections throughout the dishwasher's lifespan. Compatible units include some Kenmore, KitchenAid, and Maytag models. Replacing restores consistent cleaning performance cycle after cycle.

This control bracket secures the console or control housing to the appliance, keeping the control panel stable and properly aligned for reliable operation. Replaces a damaged or missing bracket to restore secure mounting and prevent panel movement. What it does:

• Mounts the control console to the appliance frame to prevent wobbling or sagging
• Keeps control buttons and switches aligned for consistent user operation
• Helps stop rattling or vibration noise caused by a loose control housing
• Supports wiring and components behind the console to reduce strain on connectors

• Always unplug the appliance or disconnect power before beginning service
• Remove the console or access panel per service instructions to reach mounting points
• Use appropriate screwdrivers or nut drivers; keep original hardware unless damaged
• Align bracket and tighten screws evenly; avoid overtightening to prevent stripping

Color: White

The Door Hinge (RH) is an OEM replacement part for Whirlpool dishwashers. This hinge is installed on the right-hand side of the dishwasher door, allowing it to open and close smoothly while maintaining the proper tension and alignment. The hinge plays a crucial role in ensuring the door seals securely during operation, preventing leaks and enabling efficient cleaning performance.

Common causes include regular use leading to wear and tear, accidental impacts, or exposure to moisture, which can contribute to rust or corrosion.

Symptoms of a bad door hinge include:

• The dishwasher door not closing completely
• Difficulty opening or closing the door
• A sagging or misaligned door
• Unusual noises when moving the door

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Seal is an OEM part for Whirlpool dishwashers. It prevents water leaks from the dishwasher door during wash cycles and water heating drainage. Properly installed seals around the door perimeter maintain water pressure inside the dishwasher tub and ensure leak-free operation. 

Causes of a bad seal can include cracks or breaks after extended use of the door opening and closing, exposure to heat and chemicals from regular dishwasher operation, or loose or improper installation.

Symptoms of a bad seal include:

• Water leaks visible around the edge of the door during wash cycles
• Puddles or drips left on the kitchen counter or floor after use   
• Difficulty closing or latching the dishwasher door securely

This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Track is an OEM part for Whirlpool dishwashers. It serves as the track or rail that allows the dishrack to glide smoothly in and out of the dishwasher during loading and unloading. The track is precision-engineered to provide smooth, controlled movement of the dishrack. It includes all necessary mounting brackets and attachments to facilitate simple installation.

Causes of a bad track can include scratches, dents or other damage due to impact or repeated use over time. The roller or wheel components may also become worn down or jammed, hindering proper movement.

Symptoms of a bad track include:

• The dishrack not rolling out fully or getting stuck partway
• Scratching or scraping noises when moving the dishrack
• Difficulty pushing the dishrack in and out
• The dishrack tilting or becoming unbalanced during movement

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Dishwasher Control Panel (Black) is an OEM replacement part for Whirlpool dishwashers. It serves as the primary user interface, allowing you to select wash cycles, adjust settings, and control various functions of your dishwasher.

Symptoms of a failing dishwasher control panel include:

• Unresponsive or erratic button inputs
• Malfunctioning digital displays
• The dishwasher not responding to programmed settings or commands
• Indicator lights not functioning correctly

Causes of a bad control panel can range from electrical malfunctions, physical damage from impact or moisture exposure, or simply normal wear and tear over extensive use.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dishwasher models. 

This part is a pump and motor assembly that is made for use on a dishwasher. This component is what pumps water through the spray arms during the dishwashing cycle. A new pump and motor assembly will be needed if there is an error code on the unit that advises the pump motor needs to be replaced. If water is not being pumped into the spray arms, this is also an indicator that the pump and motor assembly have gone bad. However, it is a good idea to consult a professional to determine the appropriate diagnosis. It is a good idea to shut off the house circuit breaker for the dishwasher prior to replacing this part. Wear gloves to protect the hands.This is a genuine OEM part that is sourced straight from the manufacturer. It is sold individually. This pump and motor assembly are compatible with dishwashers that are manufactured by Whirlpool, KitchenAid, Kenmore Elite, and Kenmore Pro.

This is the replacement lid for select top-load washers. It restores a secure, properly aligned cover so the lid closes and the lock/strike can engage, allowing cycles—especially spin—to run safely while helping contain splashes.

• Covers the wash basket and helps contain water splashes during operation
• Provides proper alignment for the lid lock/strike to engage
• Replaces cracked, warped, or broken lids
• May help with: lid won't close/latch and cycles that won't start or won't spin because the lid isn't closing

• Unplug the washer before servicing
• Support the lid and remove hinge screws/pins carefully to prevent damage
• Transfer existing hinge hardware and the lid strike from the old lid if your model uses them
• After installation, close the lid to verify smooth closure and lock engagement before running a cycle

This support bracket helps hold internal components in place to restore proper alignment and reduce movement. It's a simple replacement that stabilizes the affected assembly and helps stop rattling or sagging. What it does:

• Secures and supports a loose or misaligned internal component or panel
• Prevents shifting that can cause vibration, noise, or uneven operation
• Restores proper alignment to reduce wear on adjoining parts
• Functions as the OEM replacement for the original support bracket

• One support bracket

• Inspect the mounting points and surrounding parts for wear before installing
• Replace only with the matching OEM part number to ensure fit; fasten securely per manufacturer torque recommendations
• Disconnect power and follow basic safety precautions before servicing the appliance

This replacement wire/harness pigtail delivers a reliable electrical connection between components to restore proper operation and safety. Use it to replace damaged or corroded wiring that causes intermittent power or component failure. What it does:

• Provides a single, pre-terminated wire/harness connection for appliance circuits
• Restores proper electrical continuity when original wire is frayed, burned, or broken
• Helps eliminate intermittent operation, shorts, or components that won't receive power
• Matches OEM fit and termination style for a direct replacement

• One replacement wire/harness pigtail

• Disconnect power to the appliance before attempting any repair
• Verify correct routing and secure connections to avoid pinching or chafing
• Use appropriate tools and, if needed, refer to the appliance wiring diagram

This tine row replaces a broken or missing set of tines on a dishwasher lower rack to help keep plates, bowls and cookware upright and secure during wash cycles. It restores proper dish spacing and prevents items from shifting. What it does

• Replaces a damaged or corroded tine row to hold dishes securely in the lower rack
• Helps prevent dishes from tipping, colliding, or blocking spray arms
• Restores consistent spacing so water and detergent can reach items evenly
• Commonly used when individual tines are bent, missing, or the wire coating has worn away

• One tine row (single replacement piece as shown)

• Removes and snaps into the lower rack; may require gently bending adjacent tines to align
• No electrical work required; remove the rack and work on a stable surface
• Use hand protection when handling sharp wire ends or cut coating
• If rack coating is extensively damaged, consider replacing the rack to prevent rust transfer