Kdtm3354ess1 Parts

This replacement impeller fits inside the pump to move water through the appliance's system. A worn or broken impeller can lead to weak circulation, poor cleaning results, or a motor that hums without moving water. What it does:

• Mounts on the pump shaft to push water and create flow/pressure
• Helps deliver spray action and/or discharge flow for proper cycle operation
• Typical symptoms include poor wash performance, little/no water movement, or unusual grinding/rattling from the pump area

• 1 impeller

• Disconnect power and shut off water before servicing
• Access the pump assembly; remove lower panels or the sump as needed
• Clear debris, then install the impeller in the correct orientation, keeping any spacers in order
• Reassemble, restore power/water, and check for leaks and proper operation

This replacement wire/harness pigtail delivers a reliable electrical connection between components to restore proper operation and safety. Use it to replace damaged or corroded wiring that causes intermittent power or component failure. What it does:

• Provides a single, pre-terminated wire/harness connection for appliance circuits
• Restores proper electrical continuity when original wire is frayed, burned, or broken
• Helps eliminate intermittent operation, shorts, or components that won't receive power
• Matches OEM fit and termination style for a direct replacement

• One replacement wire/harness pigtail

• Disconnect power to the appliance before attempting any repair
• Verify correct routing and secure connections to avoid pinching or chafing
• Use appropriate tools and, if needed, refer to the appliance wiring diagram

This tine row replaces a broken or missing set of tines on a dishwasher lower rack to help keep plates, bowls and cookware upright and secure during wash cycles. It restores proper dish spacing and prevents items from shifting. What it does

• Replaces a damaged or corroded tine row to hold dishes securely in the lower rack
• Helps prevent dishes from tipping, colliding, or blocking spray arms
• Restores consistent spacing so water and detergent can reach items evenly
• Commonly used when individual tines are bent, missing, or the wire coating has worn away

• One tine row (single replacement piece as shown)

• Removes and snaps into the lower rack; may require gently bending adjacent tines to align
• No electrical work required; remove the rack and work on a stable surface
• Use hand protection when handling sharp wire ends or cut coating
• If rack coating is extensively damaged, consider replacing the rack to prevent rust transfer

This is an electrical wire-harness connector used to join wiring in the appliance. It restores a secure electrical connection so controls and components receive proper power and signaling. What it does:

• Provides a secure mating point between wiring harnesses or between a harness and a component
• Maintains proper electrical contact to prevent intermittent power or signal loss
• Commonly used where a detachable electrical connection is needed for service or assembly
• Can help address symptoms like intermittent operation, components not powering on, or visible damaged/loose plug ends

• Disconnect power to the appliance before inspecting or replacing any electrical connector
• Verify connector orientation and full engagement; bent terminals may need replacement
• Compare the replacement to the original to ensure terminal count, shape and locking feature match
• If wiring insulation or terminals are damaged, replace the harness

This thermostat bracket secures the refrigerator/freezer temperature sensor or thermostat to the cabinet, keeping the sensor in the correct position for accurate temperature control. Durable replacement for factory mounting hardware. What it does:

• Holds the thermostat/temperature sensor in place so it reads interior temperatures correctly
• Helps prevent loose or misaligned sensors that can cause irregular cooling or cycling
• Restores proper sensor positioning after damage or broken mounting clips
• Works with the thermostat assembly to maintain consistent appliance operation

• One thermostat mounting bracket

• Disconnect power to the appliance before service to avoid electrical shock
• Handle thermostat/sensor elements carefully; avoid bending or pinching the sensing tube
• Retain or reuse original fasteners unless replacement hardware is explicitly included

This support is a small mounting bracket that secures internal components and helps keep assemblies aligned so your appliance runs quietly and reliably. It replaces worn or broken supports to restore proper fit and stability. What it does:

• Secures internal parts or panels to prevent movement and misalignment
• Reduces vibration and rattling caused by loose or damaged supports
• Helps maintain correct alignment of assemblies for reliable operation
• Prevents further wear on adjacent parts by holding components in place

• Disconnect power (and water if applicable) before starting any repair
• Use common hand tools;
• Handle edges carefully—some components and mounting points may be sharp
• W10647236 matches the part on your appliance before installing

This pump cover replaces the damaged housing that seals and protects the washer's drain pump, helping restore proper water flow and contain leaks. It's a direct-fit service part designed for use with the original pump assembly. What it does:

• Forms the sealed housing around the drain pump and impeller to prevent water leaks.
• Helps direct drained water from the tub into the pump for proper drainage.
• Can resolve symptoms such as leaks under the washer, poor draining, or grinding/noise when the pump area is compromised.
• Replaces cracked or worn pump housings that allow water to escape or reduce pump efficiency.

• Disconnect power and water supply before servicing the washer to avoid shock or flooding.
• Basic hand tools required; some models may require removal of the front or rear access panel to reach the pump.
• Inspect surrounding seals, hoses, and clamps while replacing the cover; replace any damaged components to prevent repeat leaks.

This display lens is the clear plastic cover that protects and improves visibility of the appliance control panel. It restores a clean, readable look and shields the underlying display from scratches, spills, and wear. What it does:

• Protects the control board display window from damage and everyday wear
• Helps maintain clear visibility of LED/console indicators and touch areas
• Replaces cracked, cloudy, or scratched lenses that obscure controls
• Keeps moisture and debris away from the electronics behind the panel

• Disconnect power to the appliance before beginning any repair
• Console or trim panel removal is often required; handle clips and tabs carefully
• Use non-marring tools to avoid scratching the new lens during installation

This replacement refrigerator door gasket creates a tight seal around the fresh-food compartment door to help keep cold air in and warm, humid air out, improving cooling performance and reducing frost buildup. What it does

• Forms an airtight seal around the fresh-food door to help maintain interior temperature
• Helps prevent warm air and moisture from entering, reducing frost and condensation
• Can reduce compressor runtime caused by a leaking door seal
• Common symptom: visible gaps, tears, or warped edges around the door; uneven cooling or frost along the door perimeter

• One refrigerator door gasket

• Inspect and clean the door flange before installing to ensure a proper seal
• Start installation at the corners and work around the perimeter, pressing the gasket into the channel to seat it evenly
• Warm the gasket slightly if needed to make it more flexible for fit; avoid overheating
• Disconnect power only if required by your refrigerator model and follow all safety precautions

This manifold housing is a direct-fit replacement part that routes fluids and connects appliance plumbing or airflow to associated components, restoring reliable flow paths and secure connections. What it does:

• Serves as the central connection point to direct fluid or air between internal components
• Re-establishes sealed pathways to prevent leaks or loss of pressure
• Provides mounting and alignment for related hoses and fittings
• Helps resolve symptoms such as leaks at the connection area, loss of flow, or poor component performance

• One manifold housing assembly

• Disconnect power and water/gas supply before beginning service; follow appliance-specific safety procedures
• Inspect and replace any damaged hoses, clamps, or seals when installing the manifold
• Use correct OEM fasteners and torque where specified; avoid overtightening plastic fittings