Kdtm3354ess1 Parts

The Lower Door Seal is an OEM replacement part for Whirlpool dishwashers. This seal runs along the bottom edge of the dishwasher door, creating a tight seal against the tub when closed to contain water inside during cycles.  This seal measures approximately 22 inches in length

Causes of lower door seal failure commonly involve repeated compression stresses from opening/closing actions gradually stiffening the flexible gasket material. Drying out and cracking occurs over years of heat exposure as well.

Symptoms of a worn lower door seal include:

• Water leaking out from beneath dishwasher door during cycles
• Difficulty latching door completely from warped seal edges  
• Visible cracks, splits or brittleness along the length of the seal
• Gaps allowing water intrusion beneath door perimeter

This versatile OEM part is also compatible with select Maytag, KitchenAid, Jenn-Air, Amana, and some Kenmore dishwasher models.

The Diverter Motor is an OEM part for Whirlpool dishwashers controls the diverter valve, which directs water flow to various spray arms throughout the dishwasher during a wash cycle. By accurately adjusting the flow of water, the diverter motor ensures that dishes are thoroughly cleaned and rinsed by optimizing coverage and water intensity according to the cycle selected.

Causes of a bad Diverter Motor can include electrical failures, mechanical wear over time, or damage from water infiltration.  

Symptoms of a bad Diverter Motor include:

• Dishes not being cleaned properly due to insufficient water reaching all areas.
• Unusual noises coming from the dishwasher, which may indicate a struggling or stuck diverter motor.
• Error codes displayed on the dishwasher that are related to water distribution functions.
• Leakage from the dishwasher base 

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Touchpad Control Panel is an OEM part for KitchenAid dishwashers. It allows the user to select different wash cycles, adjust settings, and activate specific features of your dishwasher. It measures approximately 24” in length and is black in color.

Causes of a faulty touchpad control panel can include wear and tear over time, accidental spills or damage, or electrical component failure. These factors can result in unresponsive buttons, erratic behavior, or the inability to select or adjust settings properly.

Symptoms of a bad touchpad control panel may include:

• Unresponsive or non-functioning buttons
• Erratic or inconsistent response to touch inputs
• Incorrect or missing display information
• No LED display

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Restore strong spray performance with this circulation pump and motor assembly. It drives wash water through the spray arms, helping your dishwasher clean effectively and run more quietly when the original pump is worn or seized.

• Circulates wash water through the spray arms during wash and rinse cycles
• Maintains proper water pressure for effective cleaning coverage
• Common failure signs: poor cleaning results, spray arms not spinning, loud humming/grinding, or leaks from the pump area
• Replaces a non-running or intermittently running wash motor

• Disconnect power and shut off water supply before servicing
• Access is typically from the front underside; remove the toe panel/kick plate to reach the pump at the sump
• Expect residual water; place a towel or pan before loosening clamps/locking ring and electrical connectors
• Ensure the sealing surface is clean, seat the assembly fully, lock in place, reconnect hoses/wiring, and check for leaks on test run

This factory part is a precision ring used within the appliance assembly to position and secure mating components. Replacing a worn, cracked, or missing ring restores proper fit, reduces noise, and helps prevent premature wear or leaks. What it does:

• Provides seating/retention for the specified component in the assembly
• Maintains correct alignment and spacing between parts
• Helps prevent vibration, rubbing, or leaks caused by a loose fit
• Replace if distorted, cracked, corroded, or missing
• Typical symptoms include loose or wobbly parts, scraping/rattling noises, or components slipping out of place

• 1 ring

• Disconnect power and shut off any utilities (water/gas) as applicable before service
• Access the assembly and note the ring's orientation; take reference photos
• Use appropriate hand tools; avoid over-stretching and ensure the ring seats fully in its groove or against its shoulder
• Verify smooth operation of the mechanism before reassembly and testing

This Shield is a protective cover used in select Whirlpool-built appliances. It helps guard nearby components from heat, moisture, and debris so the appliance can operate as designed and nearby parts don't wear prematurely. What it does:

• Shields sensitive wiring, controls, or moving parts from heat, splashes, and debris
• Helps maintain proper airflow/deflection where the shield is installed
• Common symptoms include visible cracks, warping/discoloration, broken tabs, rattling from a loose shield, or a missing/bent shield after service

• 1 shield

• Disconnect power before servicing; also shut off gas or water if applicable
• Note the shield's orientation and reuse existing mounting hardware unless damaged
• Do not bend the shield; verify proper clearance from fans, elements, and moving parts
• After installation, restore power and check for vibration or rubbing noises

This connector links mating components within the appliance to create a secure, reliable connection. Replacing a cracked or loose connector helps restore consistent operation and prevent intermittent issues caused by poor contact or separation. What it does:

• Creates a stable connection between mating parts or harnesses in the appliance
• Helps prevent looseness or separation that can disrupt performance
• Direct replacement for broken, brittle, or deformed connectors
• Can resolve intermittent operation traced to a poor connection at this junction

• 1 connector

• Disconnect power and, if applicable, shut off water before servicing
• Note orientation and positions before removal to ensure correct reassembly
• Seat the connector fully until any locking features engage; do not force
• Inspect mating parts for wear or damage and replace if necessary

This brace connector secures a support brace inside the appliance to help keep internal panels and assemblies aligned and stable. Replacing a worn or damaged connector restores proper support and reduces noise and movement. What it does:

• Fastens and stabilizes an internal support brace or frame
• Prevents panel or assembly movement that can cause vibration or rattling
• Helps maintain proper alignment of connected components
• Replaces broken or corroded connector hardware to restore secure mounting

• One brace connector

• Disconnect power (and gas, if applicable) before starting any repair
• Access may require removing outer or control panels; save existing fasteners for reuse
• Use basic hand tools; avoid overtightening to prevent cracking plastic or bending metal
• Inspect and replace as needed

This replacement door handle restores a solid, comfortable grip for opening and closing the refrigerator door. It replaces cracked, broken or loose handles so the door operates safely and reliably. What it does:

• Provides a secure gripping surface to open and close the refrigerator door
• Replaces cracked, broken or missing handles that make the door hard to use
• Restores proper engagement with the door hardware for reliable operation
• Helps prevent accidental drops or further damage from a failing handle

• Disconnect power to the appliance or unplug the refrigerator before starting any work
• Remove any trim or end caps to access mounting screws; retain original hardware unless stated otherwise
• Hand-tighten mounting screws, then snug—do not overtighten to avoid cracking the handle

This box cover protects and conceals the appliance's electrical junction box, keeping wiring secure and reducing exposure to dirt and moisture. It restores a finished appearance and helps maintain safe electrical connections. What it does

• Shields the junction box and wiring from dust and debris
• Helps prevent accidental contact with live terminals
• Maintains the appliance's original fit and finish around electrical components
• Commonly replaced when the cover is cracked, missing, or damaged

• One box cover

• Disconnect power to the appliance before installing to avoid electrical shock
• Handle carefully to avoid damaging tabs or screw bosses used for mounting
• Use the OEM screws or fasteners; replace missing hardware with manufacturer-recommended parts

This replacement door handle restores a secure grip and smooth opening for compatible Whirlpool appliances. It replaces worn, cracked or broken handles to improve usability and appearance without replacing the whole door. What it does

• Provides a sturdy handhold to open and close the appliance door
• Replaces cracked, loose or cosmetically damaged handles
• Helps prevent accidental drops or slippage when opening the door
• Matches the original mounting points for a direct-fit replacement

• Remove power and empty the door area before starting any repairs
• Use common hand tools; hold parts steady to avoid scratching finishes
• Follow OEM instructions for fastener torque and alignment

This jumper wire connects control board circuits at the range/oven control panel to restore proper panel signaling. It's a simple replacement that helps resolve intermittent or missing control responses caused by a broken or damaged jumper. What it does:

• Bridges specific control panel terminals to complete circuit paths between the user interface and main control
• Restores continuity when an existing jumper is cracked, corroded, or broken
• Helps eliminate intermittent touch/control pad failures or non-responsive buttons linked to a faulty jumper
• Small, direct-use part for electronic control troubleshooting

• One jumper wire as shown

• Disconnect power to the appliance before servicing to avoid shock or damage
• Access may require removing the control panel or console—follow OEM service instructions
• Handle wiring and connectors carefully to avoid bending pins or damaging the control board

The Wire Harness is an OEM part for Whirlpool Built-In Dishwashers. Serving as the internal electrical backbone, this harness safely routes current through a protective casing between key components. Strategically placed grommets prevent wire abrasion and breaks from continuous motion.

Symptoms of a bad wire harness can include cracked insulation, severed wires developing from long-term vibration, imperfect installation leaving wires exposed, or physical damage like pinching or pulling during repairs.

Causes of harness issues include normal wear from continuous operation, flexing wires developing microscopic breaks over time, rough handling during repairs, or wires getting pinched. 

The symptoms of a bad wire harness are:

• Lights and modules fail to reliably power on
• Error codes flashing or cycles not completing  
• Intermittent operational failures
• Reset buttons and control panels glitching or not responding

This OEM replacement ensures stable, grounded connections throughout the dishwasher's lifespan. Compatible units include some Kenmore, KitchenAid, and select Maytag.

Color: White. Size: 1 qt. can. Acrylic appliance paint.