Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Replacement 6-inch chrome drip pan for electric range cooktops. Catches spills and protects your stovetop. Replace if rusted, cracked, or worn out.
Ordered on Wed, received on Fri. Took less than 5 minutes to replace all 4. No tools needed. Read more
Touch pad overlay for ranges and ovens. Covers the control board with buttons and display panel. Replace if cracked, peeling, faded, or worn out.
Replaced Oven control Board, I actually had a "professional" appliance repair man come to the house and tell me what was wrong with the oven. While he was standing in my kitchen, I noticed he pulled up the AppliancePartsPros.com website to quote me the pricing for the parts. I did not see it necessary to pay him the marked up price. He left the house without repairing the oven I proceeded to order the parts that same evening, replaced the bad parts the same day I received them. I noticed while... Read more
Fix F95 error code or oven door that won't lock during self-clean cycle. This door lock motor assembly repair takes about 15 minutes with basic tools.
I replaced the controller to remedy the LED display issue and changed the motor latch assembly to fix the F95 error. The installation of both parts was very easy. A local repair shop wanted a minimum of $115 just to show-up at my door, and their price for the same parts was over $140 what I paid at AppliancePartsPros. Thanks. Read more
Protects and diffuses your range's indicator light that signals when burners are on or surfaces are hot. Replace if cracked or missing. Easy install.
I ordered 7 new lens caps to replace them all. Took ten minutes to fix. Read more
Size: 10-24 x 1.375 inch.
Secured the inner and outer door together and screwed handle back in place. Read more
Leveling leg assembly installs at the front corners of your range. Replace if broken, rusted, missing, or no longer adjusts to level your appliance.
Bought new leveling leg. Took longer to lay the appliance on the side and pick back up, than to install leg. Read more
Structural pan beneath the cooktop that supports burner components. Replace if corroded, rusted, has holes from spills, or damaged from heat exposure.
Needed to replace burner box panel (pan under electric coil burners) and replace stove top (black panel that surrounds the burners). BB was corroded, had a couple big holes from liquid boil-overs (salted water) from the last 10 years. The stove top looked nasty. It was chipped & scratched badly. Removed electric coil burners and drip pans from stove top. Removed 1 small Phillips screw in each burner opening to detach electrical burner sockets from stove top. Lift stove top and support on prop... Read more
The Switch Rocker is an OEM part for Frigidaire ranges. This switch is used to control various functions of the range, such as turning on heating elements or activating specific cooking modes. It provides a reliable and straightforward interface for managing the range's features.
You should replace the range switch rocker if it becomes faulty. Causes of a bad switch rocker can include wear and tear from frequent use, exposure to high temperatures, electrical malfunctions, or physical damage from impacts or mishandling. A defective switch rocker can result in unresponsive controls, making it challenging to operate the range effectively.
Symptoms of a bad Range Switch Rocker include:
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
I purchased 2 new light rocker switches, Because the heating element rocker switch was unavailable. First I removed the power source for safety. Then I simply pulled each switch out individually with a flathead screwdriver for leverage. I simply unplugged the wires from the old rocker switch, discarded the old rocker, plugged the wires into the new rocker switch, and pushed the new switch appropriately back into the control panel. I used the same steps for both rocker switches. Once... Read more
Mounting screw for range oven door handles. Secures the handle to the door panel. Replace when stripped, corroded, missing, or if handle is loose.
Replacing the trim takes a little bit of alignment and light force. The trim slides over the glass panel of the door, with the glass sliding into plastic tabs. We kept the door nearly vertical (almost closed), lined up the tabs on the trim with the glass door, and used mild force to slide the trim down onto the glass door. (Also, we found that the tabs on trim we ordered were much bigger than the tabs on our broken trim. This is probably due to slight variations in Frigidaire's design over... Read more
Frames your range's ventilation opening. Replace if cracked, discolored, or missing. Installs around vent area for a finished appearance.
Had to order new plastic panel, scared to run the clean cycle again. Read more
Anti-tip bracket kit secures your range to the floor or wall, preventing tipping when the oven door is opened or heavy cookware is placed on extended racks.
Installed the new bracket as per instructions with template enclosed and it was perfect. Read more
Size: 3/4 inch od x 1/4 inch id.
If your range has no power or burnt plastic smell, the terminal block may be melted. This kit restores secure power connections. Moderate DIY repair.
Replaced the terminal block. Read more
Restores the finished look around your range door perimeter. Replaces cracked, discolored, or rusted trim that frames the door and secures outer components.
Replaced the door trim by removing the 2 screws holding the oven handle on, then removing the 4 screws across the bottom of the door. lifted off the door trim with the plastic door cap. removed the door trim from the cap by sliding it out. attached the new door trim with the 4 screws that had been removed before. then slid the new glass into place. next i slid the plastic door cap onto the new door trim and the glass and centered the glass evenly over the door trim. finally reattached the... Read more
This truss-head machine screw secures a switch to its mounting bracket or panel. Replacing a worn or missing screw restores a solid, aligned switch fit for reliable operation.
I replaced the Switch for the burner. Works fine. Read more
The Frigidaire Touch-Up Paint is white in color in a .6 fl oz bottle. For almond order 5303321320. For black order 5303321321.
The Touch Up Paint is an OEM part for Frigidaire appliances. Whether you're dealing with scratches, chips, or other minor cosmetic damage, this touch-up paint provides an easy and effective solution for maintaining the appearance of your appliance. It's designed to adhere well to metal surfaces, offering durability and resistance to further wear and tear.
Over time, appliances can accumulate minor surface damage from regular use, cleaning, and accidental impacts. Using the Touch Up Paint not only improves the aesthetic appeal of your appliance but also helps protect exposed areas from rust and corrosion, which can extend the life of the appliance.
Symptoms of needing Touch Up Paint include:
Quick touch up. The paint worked great. Packaged with a brush like nail poliish Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.