Kenmore 11026002011 Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W10843780
Clothes not getting clean? Worn washplate grooves reduce agitation. This washplate restores water flow and detergent distribution for proper cleaning action.
Do-It-Yourself Stories from Customers like You
Wash plate striped, clothes not washing clean Bobby M. • Lafayette , LA • August 02, 2019
Ordered new wash plate and replaced it
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10853898
The Screw is an OEM component compatible with Whirlpool washing machines. This screw secures the rear panel onto the cabinet frame, ensuring a sturdy connection between housing components. Proper installation is critical for the washer's structural integrity.
Causes of a bad screw include corrosion from repeated water exposure or stresses from years of use. Loosening can occur from vibrations weakening the threads over time.
Symptoms of a bad screw include:
- Rear panel detaching from frame opening gaps
- Increased noise and vibrations from a compromised seal
- Stress on other connections from improper mounting points
- Potential leak paths from openings near hoses or tub areas
This OEM Whirlpool replacement screw helps maintain a tight panel closure. It is compatible with additional brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP90016
Used from harness to top.
Do-It-Yourself Stories from Customers like You
A broken lid switch on my whirlpool stackable twin washer Joseph P. • Indialantic , FL • October 25, 2016
Fixing the problem was quite simple. First, I removed the lid assembly (thanks to the diagrams supplied by AppliancePartsPros.com!). Getting the back two screws out was very difficult because I couldn't see them from the front and I could not move the unit out of the enclosed space. After some trial and error, I located the screws which were 5/16 hex head screws and removed them with a MAGNETIC nut driver. (The magnet assures that the screw will not drop down into the mechanism). Second, I...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP285195
This is a small tube of silicone-based gasket sealer used to bond and seal gaskets during washer repairs. It creates a watertight seal between mating surfaces to prevent leaks around tub components or pump housings. Use this adhesive when replacing gaskets or resealing joints where the original sealant has deteriorated and water is leaking.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10251379
This control knob lets you select settings on your appliance and restores a clean, easy-to-grip interface when the original knob is worn, cracked, or missing. Simple push-on design provides quick, tool-free replacement so controls look and feel like new.
- Rotates the control shaft to change settings
- Replaces knobs that are cracked, loose, hard to turn, or missing
- Restores accurate user control and clear pointer alignment
- Maintains original fit and appearance
What's included: One control knob assembly. Install notes:
- Disconnect power and shut off gas before servicing.
- Pull the old knob straight off the control shaft; avoid twisting the shaft.
- Align the new knob's pointer and D-flat (or spline) orientation with the shaft, then press firmly into place.
- Test operation through all settings before returning the unit to service.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP489128
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8533928
Machine screw that secures panels, brackets, and components in appliances. Replace when worn, stripped, or missing to restore tight fit and stability.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 285448A
Hardware washer distributes load under fasteners to prevent loosening and reduce vibration. Replace when missing or damaged to restore secure fit.
Do-It-Yourself Stories from Customers like You
Wash machine water inlet valve Larry E. • Coleharbor , ND • February 18, 2017
Watched a video online, the project took about 20 minutes, went well, parts fit good, the video was very helpful in getting the wash machine up and running.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 350938
Color: Gray. Size: 13 oz. can. Used for coating the dryer drum interior. Acrylic appliance paint.
Do-It-Yourself Stories from Customers like You
Dryer drum completely wore off all coating Larry W. • Ubly , MI • July 01, 2016
Completely removed dryer drum cleaned surfaces ready for paint applied paint acquired from you it did a wonderful job with one can of paint will use for a while and acquire another can of paint for second coat thank you so much for your help the whirlpool dryer drum paint was exactly what it said it would do
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 8212545RP
Connect hot and cold water faucets to your washer's inlet valves with this 2-pack of 5-foot fill hoses. Replace aging, cracked, or leaking supply lines.
Do-It-Yourself Stories from Customers like You
Leaking water from center bottom of machine Thomas N. • Pleasant Mount , PA • April 05, 2026
- Didn't see any other leaks in machine. No grinding transmission noise. Assumed seal on transmission shaft was bad, since it was a central leak down the rotor. It was a little more difficult to dissemble than the video showed, but not too bad. Got it all back together and seems to be working well. No leaks yet. Didn't need washer in parts diagram - was already on the transmission. Also the drain pump filter was not necessary, it can just be cleaned.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10249633
This replacement 7-2-1 screw secures components in compatible Whirlpool appliances, providing a dependable fastener for panels and assemblies. Use it to restore proper fitment and reduce rattling or loose parts. What it does
- Fastens trim, panels, brackets, or internal assemblies to keep parts secure
- Helps stop vibration-related noise from loose components
- Restores correct mounting where the original screw is missing or damaged
- Matches the form and fit of the OEM fastener for intended attachment points
What's included
- One replacement 7-2-1 screw
Install notes
- Use the correct driver to avoid stripping the screw head
- Hand-start threads before tightening to prevent cross-threading
- Tighten until snug—do not over-tighten to avoid damaging plastic or sheet-metal parts
- Disconnect power to the appliance before accessing internal areas
Do-It-Yourself Stories from Customers like You
Gear assembly was bad Lewis S. • Cumming , GA • November 06, 2018
Replaced it with a new gear housing assembly. It was some what difficult removing the spindle hub.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10305259
Washer making noise or experiencing weak water circulation? This impeller cap secures the wash pump impeller for proper water flow and performance.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 8212546RP
Carries water from home supply to washer inlet valve. Replace if your hose is cracked, worn, leaking, or damaged by pests or age. Restores proper fill.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 8212641RP
5 foot. Package of 2.
Do-It-Yourself Stories from Customers like You
Our 11 year old Maytag clothes washer had an ld error code and we suspected the water pump was bad there was a hum when the machine was trying to pump the water David F. • Berlin , MD • April 12, 2021
We found the pump online at AppliancePartsPros.com for our model of Maytag. When we found the part, there was a video posted that was for our exact pump and washer. After watching it, we called Appliance Parts Pros to verify the part. The customer service representative was incredibly helpful and confirmed our diagnosis. We ordered the pump as well as hoses and clamps in case we needed them. We ordered them overnight delivery and the customer service rep said that we might not receive it...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP384496
Connects drain hose sections to prevent leaks and restore proper wastewater drainage. Replace if coupling cracks or connection leaks during draining.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9740848
The Switch Mounting Screw is an OEM part compatible with Whirlpool washing machines. This screw securely mounts the cycle selector switch within the control console assembly. Proper fastening ensures dependable operation of control functions.
Causes of a bad mounting screw can stem from stress cracks developing over multiple years of operation. Vibrations accumulate, slowly loosening connections housed in a wet environment.
Symptoms of a bad mounting screw include:
- Loose or rattling switch within the console face
- Difficulty selecting cycles as buttons wobble out of place
- Water intrusion hastening corrosion of electrical terminals
- Potential shock hazards if live connections are exposed
This Whirlpool replacement screw restores a tight mounting point. It is compatible with brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Neptune mah4000 had a no spin but did pump water out but not all of it Guillermo S. • Chicago , IL • March 06, 2017
I had the problem couple years ago I bypassed unbalance switch it worked fine for a couple years and had the same problem again so ruled out unbalanced switch. Door lock light on and checked made sure wax motor pushed out all the way too the second switch for spin check OK, so took a chance on displacement switch x2. My family loves to over load it and also replaced by passed unbalance switch and boom every thing went back to normal. Its also good to clean every thing when apart.
Read more
More