Kenmore Dishwasher Parts

The Flame Sensor is an OEM part for GE dryers. This part detects the presence of a flame in gas dryers, ensuring that the gas ignites properly for safe and efficient drying.

Causes of a bad flame sensor can include regular wear and tear, carbon buildup from the gas flame, or electrical malfunctions.

Symptoms of a bad flame sensor include:

• The dryer not heating or taking longer to dry clothes
• The dryer shutting off unexpectedly during a cycle
• The igniter glowing but not igniting the gas
• Error codes related to heating or ignition issues

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This exhaust duct routes hot, moist air from the appliance to the home vent, helping maintain proper airflow and reduce lint buildup. It's a direct-fit replacement designed to restore correct venting and appliance performance. What it does:

• Channels exhaust air from the appliance to the external vent.
• Helps prevent reduced airflow that can lengthen cycle times or reduce drying/heating performance.
• Reduces lint accumulation in the appliance exhaust path when intact and properly connected.
• Replaces damaged, crushed or disconnected ducting that can cause air leakage or poor venting.

• Disconnect power to the appliance (and shut off gas supply for gas models) before starting.
• Use gloves to avoid sharp edges; secure connections with the original clamps or equivalent fasteners.

This motor strap secures the appliance motor to the cabinet, keeping the motor stable during operation to reduce vibration and noise. Use this replacement to restore proper motor positioning and support in compatible models. What it does:

• Holds the motor firmly in place to prevent movement or shifting during use
• Helps reduce vibration and associated noise caused by a loose motor
• Maintains correct motor alignment so belts and linkages run smoothly
• Commonly used when a worn or broken strap allows motor sag or misalignment

• One motor mounting/retaining strap

• Disconnect power to the appliance before beginning any work
• Inspect mounting points and fasteners; replace any damaged hardware as needed
• Secure strap to the motor and cabinet using the original mounting holes and recommended hardware

This mechanical timer controls and advances cooking/wash/dry cycles so your appliance runs through its programmed steps. Replaces a failed or intermittent timer to restore normal cycle selection and timing control. What it does:

• Advances the appliance through timed cycles so each step runs for the correct interval
• Routes power to the appropriate circuits at the correct times
• Stops or fails to advance when worn or faulty, causing the appliance to remain stuck in one cycle or not start
• Commonly used when cycle selection knob turns but the machine does not progress or selected functions don't engage

• Disconnect power (unplug or shut off breaker) before installing to avoid shock
• Remove control panel/knob to access and replace the timer; keep track of mounting screws and any brackets
• Transfer wiring exactly as removed; take a photo before disconnecting to ensure correct reassembly

This levelling leg support bracket secures and stabilizes an appliance leg to keep the appliance level and steady on uneven floors. Restores proper footing to reduce rocking and improve door and drawer alignment. What it does:

• Holds the adjustable levelling leg in place so the appliance sits level and stable
• Helps stop rocking, tipping, and uneven operation caused by a loose or damaged bracket
• Restores proper appliance alignment to improve door and drawer sealing and operation
• Works with the factory levelling leg assembly to transfer weight to the cabinet/frame

• Designed for use with the factory levelling leg assembly;
• Turn off and unplug the appliance and empty any contents before working underneath
• Use basic hand tools; avoid forcing parts to prevent damage to cabinet or fasteners
• If mounting fasteners are damaged or missing, replace them with OEM-equivalent hardware

This orifice meters gas flow to a single burner, restoring proper flame size and stable heating for gas ranges and ovens. Replacing a damaged or clogged orifice helps improve ignition and consistent burner performance. What it does:

• Controls the amount of gas delivered to the burner for correct flame height and heat output
• Helps resolve weak or low flames and uneven heating when the orifice is clogged or worn
• Supports reliable ignition by maintaining proper gas flow to the burner
• Works as the precise gas port that matches the cooktop/oven's burner assembly

• Turn off the appliance and shut off the gas supply before servicing
• Use appropriate tools to remove burner components; take care not to damage threads or fittings
• After installation, check all connections for leaks with a soap solution or approved leak detector

This is a genuine GE replacement screw used to secure appliance panels and components, restoring proper fit and reducing vibration or rattling. A simple fastener that helps keep assemblies aligned and functioning safely. What it does:

• Secures panels, brackets, and small components in place
• Prevents noise from loose parts and maintains structural alignment
• Restores proper fastening after repairs or wear
• Matches OEM fit for reliable replacement

• Disconnect power to the appliance before accessing internal parts
• Use the correct screwdriver or driver bit to avoid stripping the head
• Thread carefully and tighten until snug; do not overtighten to prevent damage
• Replace any damaged or missing fasteners with the same OEM part for best results