Kenmore Elite Parts

This electric surface burner replaces a worn or broken cooktop heating element to restore even heating for pots and pans. It's a direct-replacement heating element commonly used on many Frigidaire electric ranges and cooktops. What it does:

• Heats cookware by converting electrical energy into heat for stovetop cooking
• Replaces cracked, unresponsive, or unevenly heating elements
• Helps stop sparks, intermittent heating, or a burner that won't warm
• Works with compatible receptacles and cooktop wiring to complete the circuit

• One electric surface burner element

• Disconnect power to the range at the breaker or unplug before servicing
• Remove the cooktop grate and any retaining clips to lift out the old element; reinstall in reverse order
• Inspect terminal connections and receptacle for damage; replace receptacle if corroded or loose

This refrigerator Drawer Tray Assembly forms the shelf/frame that supports a storage drawer. Replacing a cracked or broken tray restores smooth drawer movement, proper support for food items, and organization inside the compartment.

• Supports and guides the storage drawer within the compartment
• Provides a stable, level surface for everyday use
• Replace if the tray is cracked, warped, or has broken tabs
• Common symptoms: drawer binds, drops, misaligns, or won't slide/close smoothly

• Disconnect power before servicing
• Remove the drawer and any items/glass from the area to prevent damage
• Align tabs/rails, seat the tray evenly, and avoid forcing parts together
• Transfer any reusable hardware from the original assembly if required

This supporter cover is a TV rear trim piece that protects and conceals internal components while restoring the set's appearance. It provides a finished look and covers the TV's support area for safe handling and cosmetic repair. What it does

• Covers and protects the TV's rear support area and nearby components from dust and incidental contact
• Restores the TV's exterior finish after damage or missing trim pieces
• Helps maintain correct spacing for the support/stand attachment area
• Common symptom: cracked, warped, missing, or loose rear trim exposing internal parts

• One supporter cover

• Unplug the TV and place it face down on a soft, non-abrasive surface before starting
• Installation may require removing screws or disengaging plastic clips; keep hardware organized
• Handle carefully to avoid scratching the display or bending mounting tabs
• Refer to the TV's service manual for disassembly instructions and torque/spec guidance

The Infinite Switch is an OEM component specifically designed for Frigidaire ranges. It controls the burners, allowing users to easily adjust heat levels and select different cooking zones. 

Causes of a bad infinite switch can include wear and tear over time, exposure to moisture or impacts from cookware, or underlying issues with the control board or wiring.

Symptoms of a bad infinite switch include:

• Burners failing to ignite or heat up when selected  
• Inability to change burner heat levels
• Flickering or non-responsive control panel lights
• Cooktop controls becoming unresponsive

Replacing the switch with this OEM Frigidaire part can help restore full functionality. It is compatible with freestanding and slide-in electric cooktop models. This replacement switch is also compatible with ranges sold under the Whirlpool, Roper, and Maytag brands.
 

This rail guide assembly replaces a worn or damaged drawer/rack guide to restore smooth, stable movement and help prevent the rack or drawer from binding or coming off track. Fits original mounting points for a direct replacement. What it does:

• Guides and supports the drawer or rack so it slides in and out smoothly
• Helps keep the rack/drawer aligned to prevent derailment or sticking
• Replaces broken or worn plastic or metal guide components that cause noisy or rough movement
• Restores intended fit and function of the sliding mechanism

• Disconnect power and remove contents from the drawer/rack before starting any work
• Basic hand tools may be required; follow OEM instructions for orientation and attachment
• Inspect mating slides and fasteners; replace any damaged clips or screws for secure fit

This drawer tray assembly is the platform that supports a refrigerator storage drawer and guides it along the slides. Replacing a cracked or damaged tray restores smooth operation, proper alignment, and dependable support for your food items.

• Supports the drawer bin and its contents inside the compartment
• Interfaces with the slide/rail system for smooth in-and-out travel
• Helps maintain proper alignment so the drawer opens and closes fully
• Common symptoms: cracked or broken tray, broken tabs, wobbling drawer, sticking/binding, or difficulty closing

• Disconnect power and empty the drawer before service
• Remove the drawer per your model's instructions; release tabs or screws securing the tray
• Position the new tray, ensuring tabs/rollers seat correctly; reinstall any fasteners
• Reinstall the drawer and check for smooth travel before reloading

An in-line union for appliance tubing, this tube connector joins two sections of plastic line to create a secure, leak-resistant connection in the water circuit, ideal for restoring flow after a repair, trim, or reroute. What it does:

• Connects two lengths of compatible plastic tubing to form a continuous run
• Helps maintain proper water delivery through the appliance's water system
• Can address leaks, drips, or loose/failed connections at a splice point
• Useful when replacing, shortening, or rerouting tubing during service

• 1 tube connector

• Disconnect power and shut off the water supply before servicing
• Cut tubing square; ensure ends are clean, round, and free of gouges
• Insert tubing fully into the connector until seated, then perform a gentle pull test
• Restore water and inspect all joints for leaks; use the connector size that matches your tubing's outer diameter

This controller assembly is the main electronic control board that manages temperature, compressor, defrost, and user interface functions for compatible refrigerators. Replaces a failed control to restore normal electronic control and display operation. What it does:

• Controls compressor cycles, defrost timing, and temperature regulation for the refrigerator
• Interprets user inputs from the console and updates the display/status lights
• Can resolve symptoms like unresponsive controls, blank or erratic display, or incorrect temperature control
• Works with associated sensors and relays to coordinate cooling and defrost cycles

• One controller assembly as shown

• Disconnect all power before attempting repair to avoid shock or damage
• Handle the board by its edges and avoid static discharge; use a grounding strap if available

Door gasket assembly provides a secure, flexible seal around the appliance door to prevent leaks and maintain proper internal conditions. Replacing a torn or worn gasket restores sealing performance and reduces leaks, drafts, or temperature loss. What it does:

• Forms the primary seal around the door to keep water, air, and temperature inside the appliance.
• Stops visible leaks or pooling around the door opening.
• Helps prevent temperature fluctuations, frost buildup, or loss of cleaning/drying performance caused by a poor seal.
• Addresses visible damage symptoms such as cracks, tears, deformation, or persistent odors around the door edge.

• Always disconnect power (and water, if applicable) before starting any repair.
• Remove the old gasket carefully; inspect and clean the door channel and mounting surface before installing the new gasket.
• Ensure the replacement gasket is fully seated and any retaining clips or fasteners are secured per OEM instructions; test the door for proper fit and sealing.

This fresh room tray assembly replaces the crisper drawer tray that holds fruits and vegetables, restoring proper storage and organization in the refrigerator's fresh/produce compartment. Durable plastic construction supports produce and helps keep the fresh room tidy. What it does:

• Provides the flat tray surface for the fresh/produce compartment so drawers slide and store items securely
• Restores proper support if the original tray is cracked, warped, or broken
• Helps prevent items from falling into lower compartments and keeps produce organized
• Replaces worn or damaged trays that interfere with drawer movement or sealing

• Unplug or disconnect power to the refrigerator before servicing for safety
• Remove contents and the crisper drawer before installing the replacement tray
• Slide or snap the tray into the existing tracks/locator tabs; no special tools typically required
• If the tray does not seat smoothly, verify track alignment and avoid forcing parts to prevent damage

Replacement water-line tube that routes water inside the refrigerator to the ice maker or dispenser, helping restore proper water flow and reduce leaks. Designed to match factory routing so the line fits and seals correctly at the connections. What it does:

• Carries water from the cabinet valve to the ice maker or dispenser.
• Restores normal dispenser flow and ice production when the tube is cracked, pinched, or clogged.
• Helps stop visible leaks or pooling caused by damaged or misrouted tubing.
• Matches factory bends for correct routing and clearance behind panels.

• Disconnect power and shut off the water supply before starting any work.
• Remove shelves or panels as needed for access; watch for sharp edges.
• Check and replace any worn clamps or fittings; tighten connections and test for leaks with water on before reassembling.

This genuine oven bake element heats the oven cavity for baking and roasting, restoring proper cooking temperatures and consistent results. Replaces a damaged or non-heating bake element to bring your oven back to service. What it does:

• Heats the oven cavity so food reaches and holds set temperatures
• Restores even baking and roasting when the oven fails to heat
• Replaces elements that show visible damage, burn-through, or no glow
• Works with electric ovens that use a separate bake heating element

• Disconnect power to the appliance at the breaker before starting work
• Handle the element carefully to avoid bending or damaging terminals
• Remove oven racks and access the element from inside the oven
• Verify proper fit and secure mounting; tighten terminal fasteners firmly and restore power to test

This genuine door gasket assembly replaces a worn or damaged refrigerator door seal to restore a tight closure and help maintain proper temperature. It's a direct-fit replacement that keeps cold air in and warm air out for better cooling performance. What it does:

• Seals the refrigerator door edge to prevent air leaks and reduce frost buildup
• Helps maintain consistent internal temperatures for food safety
• Reduces excessive compressor run time caused by a failing seal
• Stops drafts and moisture intrusion that can cause ice or condensation

• One door gasket assembly as shown

• Unplug the appliance before starting any work and remove any items from the door
• Peel out the old gasket and clean the gasket channel before installing the new seal
• Fit the gasket into the channel, working around the door so the seal seats evenly; warm water or a hair dryer may help soften the gasket for easier installation (use low heat)
• Check the door swing and seal around the perimeter after installation

This guide assembly is a factory-style mounting guide used in TV chassis to position and support internal components, helping maintain correct alignment and stable operation during use and service. What it does:

• Provides a mounting and alignment point for internal TV components to keep assemblies stable
• Helps maintain proper spacing between parts to prevent rubbing, misalignment, or rattling noises
• Can restore correct fit where a damaged or worn guide causes loose panels or shifting components
• Useful when repairing or replacing adjacent parts that rely on the guide for proper positioning

• Guide assembly

• Disconnect power and remove the TV from its wall mount or stand before servicing
• Handle the panel and internal boards carefully to avoid damage; use non-marring tools
• Keep track of all screws and grounding hardware removed during disassembly for reassembly

This guide assembly rail replaces a worn or damaged drawer slide to restore smooth, stable drawer movement and proper alignment. It helps reduce sticking, misalignment, and rattling for a secure fit and quiet operation. What it does:

• Guides and supports the drawer or compartment during open/close cycles
• Restores smooth sliding action and consistent alignment
• Reduces noise caused by worn or bent rails or guides
• Helps prevent drawers from catching or binding

• Disconnect power and empty the drawer before beginning service
• Removal of the drawer and access panel may be required; keep fasteners for reassembly
• Align the rail before tightening fasteners; use basic hand tools

This front plate assembly is the exterior cover that protects and finishes the front of the appliance panel while keeping internal components secure and aligned. It restores the appliance's appearance and helps maintain proper operation. What it does:

• Covers and protects controls, brackets, and internal components located at the front of the appliance
• Replaces cracked, bent, or cosmetically damaged front plate panels
• Helps prevent debris and moisture from reaching internal parts that can cause malfunctions
• Restores a clean, finished look to the appliance front

• Disconnect power to the appliance before starting any repair to avoid electrical shock
• Handle the part carefully to avoid scratching or damaging the finish during installation
• Installation may require removal of adjacent trim or control panel components; keep fasteners organized