Kfeg500esso Parts

This door trim is the front-facing decorative bezel that restores the finish and edge protection to your appliance door. It replaces a worn, cracked, or damaged trim to improve appearance and help seal the door edge. What it does

• Replaces damaged or cracked door bezel to restore appearance
• Covers and protects the door edge from impacts and wear
• Helps maintain a clean seal line by securing the door edge trim
• Common symptom: visible cracks, chips, or loose trim along the door perimeter

• One door trim piece as shown

• Disconnect power to the appliance before beginning any service
• Use appropriate tools and keep fasteners for reassembly; handle trim carefully to avoid damage

This heat shield protects nearby components from excessive heat by deflecting and insulating oven/range surfaces. It helps maintain safe cabinet temperatures and prevents heat-related damage to adjacent parts. What it does:

• Deflects and shields nearby components from direct heat
• Prevents heat damage to wiring, insulation, and cabinet panels
• Stops rattling or contact when the original shield is warped or missing
• Safe symptom link: replace if you see scorched insulation, warped metal, or unusual heat transfer to nearby surfaces

• Disconnect power (and gas, if applicable) and allow appliance to cool fully before starting
• Use basic hand tools; refer to your service manual for exact removal and attachment points
• Inspect surrounding components and replace any heat-damaged parts during reassembly

A Torx screw replacement used to secure appliance panels and components for stable operation. Designed as a direct-fit fastener to replace stripped or missing screws so panels and assemblies stay properly attached. What it does:

• Replaces damaged, stripped, or missing Torx-head screws that hold appliance parts together
• Restores secure fastening for control panels, trim pieces, brackets, and access covers
• Helps eliminate rattles, loose panels, or gaps caused by missing hardware

• One Torx screw

• Disconnect power and follow appliance safety procedures before servicing
• Use the correct Torx driver bit size to avoid cam-out or head damage
• Tighten until snug; avoid overtightening which can strip threads or damage parts
• Swap all like screws to ensure uniform fit and torque

This flat washer is a direct-replacement fastening washer that restores proper spacing and fastening for appliance panels and components. It helps re-secure loose hardware so assemblies sit and operate as intended. What it does:

• Provides a smooth bearing surface for bolts and screws to distribute load
• Helps keep fasteners tight to prevent wobble or loose panels
• Restores correct spacing and alignment between mating parts
• Can reduce vibration-related noise when worn or missing

• One replacement flat washer

• Disconnect power and water before starting repairs
• Use the correct size socket or driver to remove and reinstall fasteners
• Inspect mating fastener and surrounding parts for wear; replace if damaged
• Tighten hardware securely but avoid overtightening which can deform the washer

This support bracket secures internal components to the appliance chassis, restoring proper alignment and stability for attached parts. It's a simple replacement that helps stop rattling and prevents components from shifting during use. What it does:

• Provides a secure mounting point to hold panels, assemblies or components in place
• Helps eliminate vibration or rattling caused by a loose or broken bracket
• Restores proper alignment so connected parts operate correctly
• Prevents further wear or damage from loose components

• Disconnect power to the appliance before starting any repair
• Basic hand tools (screwdriver, nut driver) are typically required
• Keep original fasteners and note their location for reassembly; replace damaged hardware as needed

This upper electrical cover protects and conceals the appliance's control box and wiring, helping keep electrical components safe from dust and accidental contact. It restores a finished appearance and supports secure mounting of the console area. What it does:

• Covers and shields the control box and wiring from dust, debris and accidental contact.
• Helps keep electrical connections secure by providing a proper mounting surface for the console.
• Restores the appliance's exterior appearance when the original cover is cracked, warped or missing.
• Reducing exposed components can help avoid nuisance issues like loose connectors or intermittent controls.

• Disconnect power (unplug or shut off the breaker) before starting any work.
• Handle panels carefully — metal edges can be sharp; wear gloves if needed.
• Keep original screws/fasteners or replace with equivalent OEM screws; verify alignment before tightening.

This is a replacement mounting screw used to secure appliance panels and components. It restores proper fastening so panels and parts stay aligned and stable during normal use. What it does:

• Fastens appliance panels, trim or internal components in place
• Replaces missing or stripped screws that cause rattling or loose parts
• Helps stop panel vibration and maintain proper component alignment
• Matches OEM fit where specified for a secure installation

• One replacement mounting screw

• Verify screw size and fit before installation; use the correct screw location from your parts diagram
• Turn off and disconnect power to the appliance before accessing internal components
• Hand-start the screw to avoid cross-threading; tighten until snug—do not over-tighten
• Wear safety glasses and follow manufacturer service instructions when applicable

This door liner is the oven's inner door panel that helps protect the door cavity and support the inner glass. Replaces a damaged or worn liner to restore a clean interior surface and proper glass fit. What it does:

• Replaces the oven's inner door panel that secures the inner glass and insulation
• Restores a sealed, smooth interior door surface to help contain heat and cooking messes
• Helps eliminate rattles or misalignment caused by a cracked or bent liner
• Compatible with ovens that specify part number W10902192

• One inner oven door liner

• Refer to the oven model's service manual for step-by-step disassembly and reassembly
• Disconnect power (and gas if applicable) before starting work
• Handle the glass and liner carefully—wear gloves and eye protection to avoid cuts
• If other door components are damaged, inspect and replace them as needed for a complete repair

This replacement screw restores secure fastening for appliance panels and components, helping stop loose parts and rattling so controls and panels stay aligned. Use when original screws are missing, stripped, or damaged. What it does:

• Secures panels, trim, control boards, brackets, or components to the appliance frame
• Stops rattling, vibration noise, and loose or misaligned parts caused by missing or damaged fasteners
• Replaces stripped, corroded, or missing screws to restore proper fit and function
• Matches OEM fit and threading for straightforward hardware replacement when the correct screw is identified

• Turn off power and unplug the appliance before accessing internal components
• Use the correct screwdriver or bit to avoid stripping the head; do not force mismatched drivers
• Tighten until snug—do not overtighten, which can strip threads or crack plastic
• Keep removed hardware organized and verify the replacement screw matches the original before installation

Color: Black   Note: Left side endcap

Color: Black   Note: Right side endcap

This glass spacer positions and cushions oven door glass to keep panels aligned and prevent direct glass-to-glass contact. Replacing a damaged spacer restores proper door fit and reduces rattling or uneven sealing. What it does

• Separates and spaces oven door glass panels to prevent rubbing and stress cracks.
• Cushions the glass to reduce vibration and noise during operation.
• Helps maintain even door alignment for a tighter closure and consistent heat containment.
• Commonly replaced when the spacer is worn, cracked, missing, or allowing glass to contact adjacent parts.

• One glass spacer

• Disconnect power to the appliance before starting any repair.
• Handle glass and the spacer with care; wear safety gloves and eye protection.
• Removal/installation typically requires partial door disassembly—retain fasteners and note orientation.
• If door glass is cracked or loose, replace damaged glass to avoid injury.

This genuine replacement drawer panel restores the appliance's finished front and helps the drawer close and align correctly. It brings back a clean appearance and reliable fit so the drawer functions and looks like new. What it does:

• Replaces a scratched, dented, or cracked drawer front to restore appearance
• Provides the proper mounting surface so the drawer aligns and closes smoothly
• Helps prevent debris from entering the drawer cavity by restoring the sealed front
• Matches OEM fit and attachment points for straightforward replacement

• Disconnect power and remove any contents before servicing the drawer area
• Remove drawer assembly per OEM instructions to access panel fasteners; keep original screws and clips if not supplied
• Handle edges carefully and align panel to factory mounting tabs; tighten fasteners securely but avoid overtightening

The Range Bracket-Glass (White) is an OEM part for Whirlpool ranges. It is designed to support and secure the glass surface or cooktop in place, ensuring stability during operation. This bracket is essential for maintaining the proper alignment and positioning of the glass panel.

Causes of a damaged bracket can include repeated exposure to heat and stress during cooking, accidental impacts, or improper installation. Over time, the material may weaken, crack, or warp, compromising its ability to hold the glass securely.

Symptoms of a bad bracket include:

• Loose or wobbly glass cooktop
• Visible cracks or damage to the bracket
• Gaps between the glass and the frame
• Difficulty securing the glass properly during reassembly

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.