Kfg306vss Parts

Insulating pad that protects cooktop surface under burner grates. Replace if worn, damaged, or causing scratches. Confirm fit with your model number.

This factory fastener secures appliance panels, brackets, and internal components so everything stays aligned and quiet. Replacing a missing or damaged screw restores a tight fit and helps reduce vibration, rattles, and wear.

• Fastens metal or plastic parts to the cabinet/frame
• Maintains alignment of covers, ducts, housings, and brackets
• Replace if the head is stripped, threads are worn, or hardware is missing
• Symptoms can include loose or misaligned panels, rattling/vibration noises, or parts that won't stay secured

• Disconnect power and shut off gas/water before service.
• Match the screw to the original location and reuse existing holes/mounts.
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening.
• Use the correct driver bit to prevent stripping the head.

This identification plate displays your refrigerator's model and serial number information for service and warranty purposes. It's typically located inside the fresh food compartment or on the exterior. Replace this nameplate if it has become illegible, damaged, or fallen off, making it difficult to identify your refrigerator model for parts or service.

Replacement door glass panel for gas range ovens. Restores clear viewing window when original glass is cracked, shattered, or missing. Fits door assembly.

Replaces cracked, fogged, or broken inner oven door glass panel. Restores clear viewing window in your gas range door assembly. Direct fit replacement.

This replacement roller fits the front or rear position of a slide mechanism, restoring smooth, even movement and reducing noise when a wheel is worn or broken. It helps racks or drawers glide properly and stay aligned. What it does:

• Provides low-friction rolling support for the slide track
• Helps slide-out assemblies move freely without binding or scraping
• Worn or damaged rollers can cause sticking, squeaking, or uneven travel
• Restores proper alignment and smooth operation when replaced

• 1 roller assembly

• Disconnect power and allow the appliance to cool before servicing
• Remove the slide-out assembly; note roller orientation and hardware
• Transfer/reuse existing screws, clips, or retainers as required
• Do not lubricate unless the manufacturer specifies a lubricant

Cast iron burner grate for gas ranges and cooktops. Sits atop burners to support pots and pans. Replace if warped, melted, cracked, or damaged.

This is a motorized blower assembly that circulates air to cool the oven's electronic controls and surrounding cabinetry during and after cooking. It helps prevent overheating of sensitive components by drawing heat away from the oven cavity. Replace this assembly if the cooling fan is noisy, not spinning, or if the oven control board is overheating or shutting off unexpectedly.

Restores a tight seal between your oven door and cavity to maintain proper temperatures. Replace if you notice heat escaping or uneven cooking. Confirm fit with your model number.

Oven won't heat properly or overheats after self-cleaning? A faulty lower thermostat often causes temperature regulation issues. Moderate DIY repair.

Convert your gas range from natural gas to propane or propane to natural gas. Includes all orifices and parts needed for fuel type conversion installation.

Burner cap sits atop each surface burner on gas ranges and cooktops. Replace if cracked, chipped, warped, or missing to restore proper flame distribution.

Replace missing or stripped screws for your range anti-tip bracket. This 2-piece hardware set secures the bracket to the wall or floor for stability.

This oven bottom pan replaces the removable bottom tray that catches spills and protects the oven floor, restoring an even surface for cooking and easier cleanup. Fits in the lower cavity under the oven racks. What it does:

• Provides a durable, porcelain-coated surface to catch drips, crumbs and spills during baking and roasting
• Helps prevent spills from contacting the oven floor and heating elements
• Restores a flat, stable cooking surface for pans and bakeware
• Can reduce time spent scrubbing baked-on messes when used with proper liners

• One oven bottom pan

• Allow the oven to cool completely and disconnect power before replacing the pan
• Remove oven racks, slide out the old pan, then slide the replacement into the same position
• No special tools typically required; handle carefully to avoid chipping the coating

This replacement fan motor restores proper airflow for your appliance's ventilation/cooling system so the unit can run efficiently and avoid overheating. Designed as a direct-fit replacement for the OEM fan motor part number shown. What it does

• Spins the blower/fan to circulate air across coils or through the appliance cabinet
• Helps maintain proper cooling and prevents overheating of components
• Can reduce or eliminate loud whine, grinding, or reduced airflow when failing
• Supports stable operation of compressors, condensers or exhaust systems

• Disconnect power to the appliance before starting any repair.
• Follow service manual instructions for access; remove panels/guards as needed.
• Handle the motor and connectors carefully; support any attached fan or housing during removal.
• After installation, verify proper fan rotation and unobstructed airflow before reassembling covers.

This replacement cooktop glass surface restores the smooth, easy-to-clean top on compatible Whirlpool cooktops. It gives a fresh, intact cooking surface when the original glass is cracked, chipped, or cosmetically damaged. What it does:

• Replaces a cracked, chipped, or scratched cooktop glass surface to restore a smooth cooking area
• Provides a sealed, easy-to-clean surface for radiant or electric cooktops
• Helps prevent glass fragments and reduces snagging of cookware on damaged areas
• Restores the appliance's appearance and normal countertop integration

What's included: One replacement cooktop glass surface. Install notes:

• Disconnect power to the appliance before starting any repair to avoid shock hazards.
• Handle glass with care; wear cut-resistant gloves and eye protection when removing/installing.
• Installation may require removal of trim, burners, or mounting brackets—keep all fasteners and follow model-specific instructions.