Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
This spark module generates the electrical pulses sent to the spark electrodes at each burner to ignite the gas. It is activated when a burner knob is turned to the ignite position. Replace this module if one or more burners fail to spark, spark continuously without stopping, or if you hear clicking but get no ignition.
Replaced the spark module. Read more
Seals cooktop to countertop, preventing gaps and noise. Replace when installing or reinstalling your cooktop. Verify fit with your model number.
I read different reviews and believed the problem was most likely the switch had failed. I confirmed the proper switch for my Model number with a very helpful Pro and ordered a new roll of tape that protects the glass top and seals the union of glass to the counter. In my case, the cooktop did not have any flanges stabilizing the cooktop so I could remove a drawer below the cooktop and push up on the cooktop to separate it from the counter. It was simply removing screws with a nut driver or... Read more
Burner head sits on the base and distributes gas through precision ports for even flame. Replace if cracked, clogged, or corroded for proper ignition.
My husband did an awesome job replacing the burner. Read more
Glass scraper tool for cleaning cooktop surfaces. Removes stuck-on food, spills, and residue from glass cooktops. Essential for maintaining appearance.
Remove unit, remove about 12 screw holding the top to the unit switch the tops reverse steps and done Read more
Secures the gas orifice beneath your cooktop and routes gas to the burner head. Replace if cracked, damaged, or missing to restore proper alignment.
Replaced damaged burners and all screws using anti-seize. Also I found that a couple of the gas lines had seized in the nuts, so I replaced the lines with 1/8" copper tube and new compression fittings. Read more
Fix burner ignition problems or weak flames with this cooktop gas burner orifice holder. Channels gas from valve to burner head for reliable performance.
By replacing the Orifice holder assembly, which includes the igniter. Read more
If your cooktop burner won't ignite reliably or flame is uneven, a damaged orifice holder may be the cause. This part directs gas flow to the burner head.
My stove is probably 15 years old and when I was removing the screws that hold the burner in place on top of the stove top, both of them broke off so I had to replace the entire assembly. APP had all the parts I needed and were helpful on the phone. However when I was attempting to loosen the gas line to the burner the tubing wouldn't release from the brass nut and the tubing twisted too much. Even though it didn't appear broken I wasn't comfortable knowing the metal was surely weakened so I... Read more
Fix weak or uneven flames caused by a worn orifice holder. This part secures the gas orifice for consistent flow and reliable ignition. Simple DIY fix.
LP conversion kit with 7 spud orifices for converting gas cooktop from natural gas to propane. Includes multiple orifice sizes for different burners.
Was an easy fix. Removing natural gas orifices, replacing them with propane orifices. Read more
Replaces scratched, faded, or missing finish cap on your gas cooktop. This coal matte black trim piece covers exposed hardware for a clean look.
Hex head sheet metal screw secures appliance panels, brackets, and trim. Replace missing, stripped, or damaged screws to keep covers firmly attached.
Black control knob for cooktop burners. Attaches to valve stem to adjust heat settings. Replace if cracked, worn, or missing for proper control.
This is a matte black center burner cap that sits on top of a sealed gas burner on a range or cooktop. It distributes the flame evenly around the burner for consistent heating. Replace this cap if it is chipped, cracked, discolored, or if the flame pattern from the burner appears uneven or irregular.
Gas cooktop orifice kit for converting between natural gas and LP propane. Includes color-coded orifices for burners. Replace when switching fuel types.
Burner won't ignite or flame is weak? This top burner valve controls gas flow to individual burners. Common repair for ignition and flame issues.
Fix weak flames or burners that won't light with this gas burner valve. Controls gas flow to restore proper flame control on your range's surface burner.
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.