Kgra806psso2 Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

Genuine Whirlpool part

Burner Cap (Blk)

5.0 (6)

By: Whirlpool

Part Number: WP3191898

Color: black. Small size. Measures about 2-1/2 inches in diameter.

Do-It-Yourself Stories from Customers like You The burner cap was lost when we moved Michael W. • Cleveland , OH • October 27, 2014

We gave ApplianceParts the model# of the stove they checked their inventory they had the Burner Cap in the right color we ordered it and it arrived in three days, it was the exact replacement. Read more

$55.95

Compare At:: $67.14
You Save:: $11.19

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Reciever, Hinge

5.0 (2)

By: Whirlpool

Part Number: WP4455605

Left side hinge receiver for door hinge. For right side hinge receiver use WP4455606.

Do-It-Yourself Stories from Customers like You Oven door would not close all the way so the light stayed on Scott M. • Placerville , CA • July 19, 2016

I was able to order new hinge receiver brackets for the door. The repair was not that bad. I just had to take off the lower door, take the two trim pieces off the sides and unscrew the screws holding the oven into the face of the cabinet. Then slide it out about halfway and put a step stool under the front to keep it from tipping over. Then it was just a matter of taking off everything around the sides until I could take the brackets off, put the new brackets on, and put everything back... Read more

$69.95

Compare At:: $82.54
You Save:: $12.59

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Reciever, Hinge

5.0 (2)

By: Whirlpool

Part Number: WP4455606

Right side hinge receiver for door hinge. For left side hinge receiver use WP4455605.

Do-It-Yourself Stories from Customers like You Oven door would not close all the way so the light stayed on Scott M. • Placerville , CA • July 19, 2016

$69.42

Compare At:: $82.61
You Save:: $13.19

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Anti Tip Bracket

4.4 (5)

By: Whirlpool

Part Number: W11447673

The Anti Tip Bracket is an OEM component specifically designed for Whirlpool ranges. This bracket plays a crucial safety role in preventing the range from accidentally tipping over if excessive weight is applied to the open oven door.

The anti-tip bracket secures tightly to the floor or wall behind the range, linking it securely in place. It allows the oven door to function while ensuring the entire appliance remains stable even under heavy use.

Causes of a bad bracket can include damage, deterioration of mounting hardware over time, or failure to install properly according to manufacturer instructions.

Symptoms of a faulty anti-tip bracket include:

The range appears unsecured and able to wobble or rock backward
Looseness between the bracket and mounting surface
Cracks or breaks in the anti-tip bracket material

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Anti tilt bracket for stovetop oven Richard O. • Levittown , PA • October 11, 2019

Installed it according to video watched. Read more

$25.95

Compare At:: $31.14
You Save:: $5.19

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Ground Screw (8-32 Thread)

5.0 (3)

By: Whirlpool

Part Number: WP4449743

This ground screw secures the appliance's grounding wire or strap to the chassis or terminal area, creating a reliable bonding point. Replace a missing or damaged screw to restore a proper ground connection during installation or service.

Provides the designated bonding point for the grounding wire/strap
Fastens to the frame or terminal area using 8-32 machine threads
Helps maintain a consistent ground path for safe operation
Typical reasons to replace: stripped head/threads, corrosion, or a missing screw

What's included: 1 ground screw Install notes:

Disconnect power at the breaker or unplug the appliance before servicing
Route the ground wire/strap to the specified grounding location
Start threads by hand to avoid cross-threading; tighten snugly without overtightening
Ensure the ground connection is secure and complies with local electrical codes before restoring power

Do-It-Yourself Stories from Customers like You Hinges wouldn’t lock. Josh S. • Coatesville , PA • March 08, 2020

New hinges solved the problem! FYI the mounting holes were not tapped for screws, I was able to self tap but glad I bought new screws. Read more

$5.95

Compare At:: $7.08
You Save:: $1.13

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Door Removal Pin Kit

4.6 (13)

By: Whirlpool

Part Number: 814381

Kit includes 4 pins.

Do-It-Yourself Stories from Customers like You Upper cooling blower was making loud noise no error code Raymond M. • Mundelein , IL • February 06, 2016

I have a 10 year old Kitchenaid double oven with warming drawer below and electrical connection is located in cabinet below. I order a service manual from http://www.allrepairmanuals.com. If you have the service manual follow it, it walks a technician thru each step. If you don't have a manual here are a few highlights. Disclaimer the following is for my oven model KEBS208DBL8, your oven service steps may vary. IMPORTANT! First step turn-off the power to the oven (mine was a 40 amp breaker)... Read more

$10.95

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Oven Door Hinge (Right-Hand, White)

4.8 (6)

By: Whirlpool

Part Number: WP9760571

This right-hand oven door hinge assembly supports and counterbalances the door so it opens smoothly and closes firmly against the gasket. Replacing a worn hinge restores proper alignment and heat retention for consistent cooking performance.

Provides the pivot point and spring tension for the oven door
Helps the door open smoothly and close completely for a tight seal
Wear or damage can cause sagging, misalignment, or slamming/falling open
Heat loss from a poor seal may lead to long preheat or temperature fluctuations

What's included: One right-hand door hinge assembly.

Disconnect power and allow the oven to cool completely before servicing
The hinge is spring-loaded—support the door and use care to avoid injury
Remove the door per your model's instructions, then replace the right-side hinge
After installation, adjust per service guidance if needed

Orientation note: Right-hand means the hinge on the door's right side when facing the appliance.

Do-It-Yourself Stories from Customers like You Oven door was difficult to remove and put back on Steve B. • Greensboro , NC • February 27, 2017

The door hinge latches were bent, which made it difficult to remove the door and re-insert. The door hinge design was changed from a pin insert to a latch from the previous model. Unfortunately, the latch on the 24 inch oven is thin and easily bent, which is likely the source of the problem. I purchased spare door hinges to facilitate re-installing the oven door should I ever have problems with removing and inserting the door again. Read more

$57.54

Compare At:: $69.05
You Save:: $11.51

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Oven Door Hinge (Left-Hand, White)

5.0 (5)

By: Whirlpool

Part Number: WP9760572

This left-hand oven door hinge assembly restores smooth, spring-assisted door movement and a tight seal. Replacing a worn or bent hinge helps the door close properly, reducing heat loss and improving cooking performance and safety.

Supports and pivots the door; spring mechanism controls opening/closing tension
Helps the door close fully and compress the gasket for a proper seal
Corrects sagging, misalignment, or popping doors caused by hinge wear
Common symptoms: door won't close or stay shut, drops open, uneven gaps, heat escaping, oven light stays on

What's included: 1 left-hand door hinge assembly Install notes:

Disconnect power and allow the oven to cool completely before servicing
Remove the door per your model's instructions; support the door and release hinge locks before lifting off
Left-hand specific: install on the left side when facing the appliance
Hinge springs are under tension—use caution, and wear gloves and eye protection

Do-It-Yourself Stories from Customers like You Oven door was difficult to remove and put back on Steve B. • Greensboro , NC • February 27, 2017

$55.46

Compare At:: $66.00
You Save:: $10.54

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Oven Temperature Probe Jack

By: Whirlpool

Part Number: 8186589

This replacement jack mounts inside the oven cavity and provides the receptacle for the food temperature probe. It restores a dependable connection so the control can monitor internal food temperature and operate probe-cook features as intended.

Provides the in-oven receptacle for the food/meat temperature probe
Carries the probe's signal to the control during probe-cook cycles
Helps resolve issues where the control does not recognize a probe or the probe feature won't run
Replaces a jack that is damaged, corroded, or loose

What's included: Probe jack assembly Install notes:

Disconnect power at the breaker and allow the oven to cool completely
Access from inside the oven; remove the mounting screw(s) and carefully pull the jack to reach the wire harness
Transfer/connect the harness and seat any gasket or insulation to maintain the oven cavity seal
Do not overtighten fasteners; avoid pinching or damaging wires and insulation

$78.57

Compare At:: $93.16
You Save:: $14.59

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Blower

5.0 (5)

By: Whirlpool

Part Number: W10810687

This blower moves air through your appliance to maintain proper cooling and ventilation. Replacing a worn or noisy blower restores airflow and helps protect internal components so the unit operates as designed. What it does

Drives airflow through ducts or cooling channels to manage heat inside the appliance
Helps expel heat and moisture or circulate cooling air, depending on the design
Common symptoms of failure: fan won't run, weak/no airflow, loud rattling or squealing, burning smell, overheating or shutdown, or cooling/vent-related error messages

What's included

Includes 1 blower

Install notes

Disconnect power before servicing; allow hot surfaces to cool
Metal edges can be sharp—wear cut-resistant gloves and eye protection
Note wire connections and mounting orientation; transfer any brackets or seals from the original unit if required
After installation, confirm unobstructed airflow and correct blower orientation before fully reassembly and testing

Do-It-Yourself Stories from Customers like You Blower cooling fan had a bad bushing and was vibrating and making noise Christopher O. • Great Falls , VA • March 12, 2014

Easy fix, this was an identical match to the fan that was in the oven. The only thing missing was the foam strip, that easily came off the old fan assembly and stuck to the new one. The hardest thing was finding the part, and with a picture to verify. I have found appliancepros.com has a large list of available parts,easy to find in their inventory of available items, and some of the best prices as well. This is a Whirlpool convection slide in oven, and the Whirlpool site was worthless, did... Read more

$152.95

Compare At:: $205.02
You Save:: $52.07

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Inner Burner Cap (Coal Matte Black)

5.0 (2)

By: Whirlpool

Part Number: WP9758829CB

This inner burner cap, in a coal matte black finish, sits on the center of the burner to shape the flame and shield the burner head—helping restore even heat and reliable ignition when the original cap is worn, chipped, or missing.

Seats on the inner burner head to focus and distribute the flame evenly
Protects burner ports from spills and debris that can affect flame quality
Proper seating helps maintain correct flame color and simmer performance
Common symptoms of a damaged/missing cap: uneven or yellow flames, delayed ignition, or flame lifting

What's included: 1 inner burner cap in coal matte black Install notes:

Shut off gas/electric supply and allow the cooktop to cool completely
Lift off the old cap; clean and dry the burner head surface before installing
Center the new cap and align any locating features; ensure it sits flat and level
Test the burner and reseat the cap if the flame is uneven

Do-It-Yourself Stories from Customers like You Burner cap was burnt and could not be cleaned Diane B. • La Crescenta , CA • March 08, 2018

I ordered a new one Read more

$47.95

Compare At:: $57.06
You Save:: $9.11

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Burner Cap

5.0 (7)

By: Whirlpool

Part Number: WP8284669

6,000 BTU. Color: Coal matte black. Measures about 2 inches in diameter.

Do-It-Yourself Stories from Customers like You Discolored burner caps and grates E G. • Warwick , MD • May 12, 2017

We have a JENN-AIR dual fuel stove. Replaced with new ones. Excellent web site. Easy to use. Excellent repair parts. Fast shipping and service. Stove looks brand new! Read more

$53.95

Compare At:: $64.20
You Save:: $10.25

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Oven Door Hinge

5.0 (1)

By: Whirlpool

Part Number: WP9760579

This oven door hinge restores smooth, controlled door movement and a tight seal. Replace a worn hinge to help your oven close properly, retain heat, and operate safely without slamming, sagging, or uneven gaps.

Supports and pivots the oven door; spring tension controls opening and closing
Helps the door sit flush against the gasket to minimize heat loss
Restores alignment when the door feels loose, sags, or doesn't close evenly
Resolves symptoms like door slamming, uneven gaps, poor temperature regulation, or extended preheat times

What's included: 1 oven door hinge assembly Install notes:

Disconnect power at the breaker; shut off gas supply if applicable
Support the door; engage hinge locks and remove the door
Replace the hinge and securely reinstall using existing fasteners
Rehang the door, verify latch engagement and seal, and test door movement

Do-It-Yourself Stories from Customers like You The oven door was not closing completely and heat was escaping through the top of the door Servi E. • Tualatin , OR • January 16, 2017

Ordered the two hinges, removed the oven door and replaced the hinges. Read more

$52.31

Compare At:: $61.73
You Save:: $9.42

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Screw

5.0 (1)

By: Whirlpool

Part Number: WP4450038

Screw for control panel vent.

Do-It-Yourself Stories from Customers like You The screw holding microwave oven door missing. Elizabeth B. • San Ramon , CA • June 06, 2022

Ordered the right screw and screwed it in. Door now properly secured. Read more

$5.95

Compare At:: $7.08
You Save:: $1.13

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Support Roller Kit

5.0 (6)

By: Whirlpool

Part Number: 814229

Drawer support roller kit. Installation instructions included.

This part fixes the following symptoms

Door won't close

Do-It-Yourself Stories from Customers like You Guide wheels snapped off on the under oven storage drawer Michael L. • New York , NY • April 03, 2015

Found the parts on Appliance pros (love the website navigation); ordered on a Sunday afternoon and they were delivered on Tuesday afternoon. I had the drawer repaired within 15 minutes of Fed Ex delivering the package. No tools required other than my fingers! The original part was riveted to the drawer, these replacements are bolts with nuts and lock washers. Makes me wonder why this was not the original design. The riveted design NEVER seems to hold up to consumer use. Why do it on an... Read more

$43.95

Compare At:: $51.86
You Save:: $7.91

IN STOCK

Ships Today Guaranteed

Add to Cart

Genuine Whirlpool part

Burner Cap (Blk)

5.0 (5)

By: Whirlpool

Part Number: WP3191904

Color: Black. This large cap measures about 3 inches in diameter. For gray order WP3191905. For the small cap order WP3191898.

Do-It-Yourself Stories from Customers like You Needed new burner caps for cosmetic appearence Noel J. • Boise , ID • March 04, 2015

Ordered burner caps from appliance parts pro good price fast delivery time great customer service easy install less than five minutes will use this parts supply company again. Read more

$109.95

Compare At:: $131.94
You Save:: $21.99

IN STOCK

Ships Today Guaranteed

Add to Cart

Appliance

Appliance

Lawn & Garden

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Kgra806psso2 Parts

Burner Cap (Blk)

Reciever, Hinge

Reciever, Hinge

Anti Tip Bracket

Ground Screw (8-32 Thread)

Door Removal Pin Kit

Oven Door Hinge (Right-Hand, White)

Oven Door Hinge (Left-Hand, White)

Oven Temperature Probe Jack

Blower

Inner Burner Cap (Coal Matte Black)

Burner Cap

Oven Door Hinge

Screw

Support Roller Kit

Burner Cap (Blk)