Khms2050sss-2 Parts

The Spacer is an OEM part for Whirlpool microwaves. It is used to create a specific distance between components, ensuring proper alignment and function within the microwave. This spacer is critical for maintaining the correct positioning of parts during operation.

You should replace this spacer if it becomes damaged or worn out. Causes of a bad spacer can include mechanical stress, heat exposure, or accidental damage during repairs or maintenance. A compromised spacer can lead to misalignment of microwave components, affecting overall performance.

Symptoms of a bad spacer include:

• Misalignment of internal parts
• Unusual noises during microwave operation
• Improper functioning of the microwave components

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This lamp housing secures and insulates the appliance light socket and bulb, keeping the light stable and protected. Replacing a damaged housing restores a safe, reliable mount so you can clearly see inside when the light is on.

• Supports and protects the light socket and bulb
• Mounts the light assembly to the interior panel or liner
• Helps shield nearby wiring from heat and vibration
• Common symptoms include a cracked/melted housing, loose bulb or socket, or intermittent/no interior light with a known-good bulb

• Disconnect power before servicing to avoid electrical shock
• Remove the lens/cover and bulb to access the housing
• Note wiring and orientation; transfer the socket and wiring from the old housing if applicable
• Secure the new housing without overtightening; test light operation before reassembling covers

This interlock is the door safety switch assembly that keeps the appliance from running with the door open, restoring proper door sensing so the unit only operates when the door is fully closed. What it does

• Acts as the door safety switch to interrupt power or start signal when the door is open.
• Prevents the appliance from starting or running if the door won't latch or the switch fails.
• Common symptom: appliance does not start or stops immediately when the door is closed or opened.
• Useful when replacing a worn or damaged door latch/switch that causes intermittent operation.

• Disconnect power (unplug or switch off at the breaker) before servicing to avoid shock or injury.
• Access typically requires removing the appliance's front or control panel; keep track of fasteners and wire locations.
• Handle electrical connectors carefully; inspect wiring and connectors for damage before reconnecting.
• Test the switch with a multimeter.

This magnetron is the microwave's high-voltage tube that generates the microwaves used to heat food. Replacing a faulty magnetron restores heating performance and stops power-related cooking failures. What it does:

• Converts high-voltage electrical energy into microwave radiation that heats food
• Common symptom: microwave runs but does not heat
• Also be needed if you notice humming, arcing, or a burning electrical smell during operation
• Works with the oven's high-voltage system and waveguide to deliver cooking power

• Disconnect power before servicing; microwave high-voltage components can retain lethal charge
• Discharge the high-voltage capacitor and follow safety procedures
• Inspect waveguide cover and surrounding components for damage when replacing the magnetron

This electronic control board replaces the console's main control module to restore touchpad/setting control and cycle management. It helps bring back normal oven/range or appliance control when the display or functions are unresponsive. What it does:

• Controls user inputs, cycle timing, and display functions for the appliance console
• Manages bake, broil, timer and other electronic commands routed through the console
• Commonly used when the display is blank, buttons don't respond, or functions start/stopping unexpectedly
• Works as the central logic board that communicates between controls and heating/drive systems

• Disconnect power to the appliance before beginning work to avoid shock or damage.
• Handle the board by its edges and avoid contact with components to prevent static damage.
• Some disassembly of the console or control panel is required; keep track of fasteners and wiring locations.
• Replace any damaged mounting hardware or harnesses as needed.

This replacement door tension spring restores proper door balance and closure on compatible Whirlpool appliances, helping the door stay aligned and close securely. It's a direct-fit repair part when the existing spring is worn or broken. What it does:

• Provides counterbalance tension so the appliance door opens and closes smoothly
• Prevents the door from sagging, sticking, or not staying fully closed
• Reduces excess strain on hinges and latch mechanisms caused by a weak spring
• Helps eliminate rattling or uneven door movement that can occur when springs fail

• One replacement door tension spring

• Disconnect power and empty the appliance door area before starting any repair
• Use caution: springs are under tension—wear safety glasses and gloves
• Typical install requires basic hand tools; follow OEM diagram for correct routing and attachment

This interlock is the door latch assembly that keeps a dryer door closed and prevents the dryer from running when the door is open. It restores proper door sensing for safe, reliable operation. What it does:

• Secures the dryer door so the machine only runs with the door fully closed
• Activates the door-safety circuit so the dryer stops when the door opens
• Commonly replaced when the door won't latch or the dryer won't start
• Helps eliminate intermittent start/no-start symptoms related to door sensing

• One interlock assembly

• Disconnect power before starting any repair to avoid electrical shock
• Replace only with the exact part number specified for your model
• Basic hand tools are typically required; avoid forcing plastic clips and connectors

A replacement mounting screw used to secure appliance panels and components. This OEM-style screw helps restore proper fit and reduces rattling or loose parts for a finished, secure assembly. What it does:

• Fastens control panels, brackets, or interior trim to the appliance frame
• Restores proper alignment when an original screw is missing or stripped
• Stops rattling or vibration caused by loose fasteners
• Matches OEM fit for reliable fastening when the correct screw is used

• Turn power off at the breaker before servicing electrical appliances
• Match screw length, head style and thread to the removed fastener before installation
• Use the correct screwdriver or bit to avoid cam-out or head damage
• Do not overtighten; snug until secure to avoid stripping threads or cracking components

This cam plate is the stamped metal guide that secures and locates the dryer drum, helping maintain smooth rotation and proper alignment. Replaces a worn or damaged cam that can cause noise, rubbing, or uneven drum movement. What it does:

• Positions and guides the dryer drum to prevent lateral movement and maintain alignment.
• Absorbs and transfers load between the drum and the rear support assembly for stable rotation.
• Reduces metal-on-metal contact that can cause squeaks, scraping, or worn drum edges.
• Helps restore smooth drum tracking when a broken or worn cam causes rubbing or off-center rotation.

• One cam plate

• Disconnect power before starting any repair to prevent shock or injury.
• Access typically requires removing the dryer front or top panel and supporting the drum; follow OEM service manual steps.
• Inspect associated rollers, glides, and mounting hardware and replace if worn to prevent repeat failure.
• Tighten fasteners to OEM torque and verify proper drum rotation before full reassembly.