Need Help?
Call or text
This hose clamp secures a rubber or plastic hose to its fitting to maintain a tight, leak-resistant seal. Replace a worn or missing clamp to stop drips and keep appliance water connections secure.
Replaced the tube and the clamp Read more
This replacement screw secures appliance components and panels so they stay aligned and rattle-free during operation. Replace stripped, missing, or corroded hardware to restore a tight fit and dependable performance. What it does
Ordered parts and hubby replaced and now it works. Thanks. Read more
Hose clamp for securing water supply and drain hoses on the washer. Provides leak-free seal at hose connection points.
Replace faucet adapter, replace fill and drain hose assembly. You must remove outer cabinet to be able to route new hoses and access hose connections under tub. Read more
Fix soap or softener not dispensing at the right time with this washer dispenser switch. Solves detergent drawer timing issues. Simple DIY repair.
After viewing websites I found on the Internet I started troubleshooting and determined that the soap dispensing motor had seized. I then had to find the part. The local parts store told me 2 weeks so off two the Internet I went Read more
Extends the drain hose approximately 4 feet. You must also order a drain hose connector kit: 285835.
I ordered the drain extension kit and the hose connector kit. Read more
Fixes F02 drain error codes and slow draining. This small ball creates a seal in the tub-to-pump hose to control water flow. Simple DIY replacement.
Prior to ordering parts I had pulled the pump strainer basket and cleaned it out. There was both soft and hard scale build up. The tub-to-pump hose was also pretty crusty/slimey. Still got warnings for SUDS and repeated F02 errors. Ordered parts and replaced the pump, tub-to-pump hose, interior drain hose and exterior drain hose (both hoses has some slime build up). The water standing in the tub when I emptied it the first time had very little suds but we kept getting the SUDS warning. ... Read more
This factory fastener secures appliance panels, brackets, and internal components so everything stays aligned and quiet. Replacing a missing or damaged screw restores a tight fit and helps reduce vibration, rattles, and wear.
The plastic piece on the handle where the screw goes in to hold glass door up had broke. I ordered new handle, the retainer pieces that go over the plastic pieces to lock it all in and screws that were suggested. The screws were the wrong ones. They were way too small. I already had one screw and thankfully only had to buy 1 new one because the screw was $40 and shipping’s $10 for it AND it’s on back order right now. The old retainer ring that goes over plastic piece was a nightmare to remove... Read more
Front counterweight that mounts to the washer's outer tub. Replace if cracked, broken, or missing to restore proper balance and reduce vibration during spin.
It was a very easy repair, I was able to find and order the parts from appliancepartspro.com and use the video that explained step by step how to install the bellow tub seal. The parts were shipped very quickly, I chose the next day shipping option and had my order in my home within 36 hours. Read more
Fix a washer that fills when off or leaks at the inlet valve with this L-shaped flowmeter hose. Connects water inlet to flow sensor. Easy 30-minute repair.
We installed a new inlet valve and flowmeter. Read more
Washer won't start or shows electrical faults? A failed ground switch disrupts the safety circuit. This switch restores proper grounding for reliable operation.
Watched YouTube and ordered parts then replaced the parts and walla !!!! All was good. Read more
Noise filter (line filter) that suppresses electrical interference on the washer power line. Protects electronic controls from power surges and reduces EMI. Replace if washer has intermittent operation or won't start.
Detergent not dispensing into drum? This dispenser to tub hose carries detergent from the dispenser to the washer tub. Moderate DIY repair.
I first watched the video showing me how to replace the tub seal. This probably covers everything you need to know about taking apart and putting together this unit. Completely disassembled the washer and power washed the back of the basket around the spider. There was light corrosion on the spider. Cleaned the tub and installed new gasket. Replaced tub to pump hose and discharge hose. Replaced the bellow tub seal and installed new spring. Replaced dispenser to tub hose. Cleaned... Read more
Restores smooth pedestal drawer operation. Replace when drawer sticks, won't close properly, or slides are bent or damaged. Confirm fit with model number.
Replaced slides Read more
Includes water temperature sensor.
Order the part, had some issues install it but able to solve with your help. Read more
This replacement screw secures appliance components and panels in their proper position. Replacing worn, stripped, or missing hardware restores a tight fit, reduces vibration or rattles, and helps maintain safe, reliable operation per the manufacturer's design. What it does:
Fixes loud banging and excessive vibration during spin when suspension spring hangs loose. This bracket secures the spring to the cabinet for stable operation.
Ordered the springs and shocks. Noticed that the washer had placement for 4 springs, but the factory only installs 2 (or they forgot to install the other two on my machine). If you replace the springs, be sure to check for the spring bracket mount. You will also need those. The washer is running fine. Next I'll work on the dryer. Read more