Kitchenaid Kuic15nlts4 Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2310139
Fix ice maker controls showing no power or wrong voltage at pumps. This transformer assembly supplies stable low-voltage power to the control board.
Do-It-Yourself Stories from Customers like You
Not working Gerald S. • Pompano Beach , FL • October 21, 2016
Transformer not working
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP488163
Replacement screw that secures panels, brackets, and trim to appliance cabinets. Restores reliable hold when original hardware is stripped or missing.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 8193716
This adjustable leveling leg threads into the appliance base to set height and stabilize the cabinet. Replacing a worn or missing leg helps stop rocking and vibration and helps maintain proper alignment for reliable operation.
- Provides adjustable support at one corner of the appliance
- Helps level the unit for correct alignment with floor or cabinetry
- Reduces rocking, vibration, and rattling noises
- Replaces stripped, bent, cracked, or missing leg
What's included: 1 adjustable leveling leg Install notes:
- Disconnect power and, if applicable, shut off water before servicing
- Carefully support or brace the appliance to access the base safely
- Start the new leg by hand to avoid cross-threading; adjust height gradually
- Use a level to check side-to-side and front-to-back, then recheck after positioning
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10843121
Drier tube for refrigerators. Installs in the sealed refrigeration system to remove moisture. Replace if cracked, corroded, or during compressor repairs.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3400884
Size: 8-18 x 5/8 inch.
Do-It-Yourself Stories from Customers like You
Recirculation pump burned out new pump required new wiring harness mounting bracket was cracked upon removal Lawrence J. • Austin , TX • January 24, 2026
Updated wiring harness to match connector on new recirculation pump. Had to replace mounting bracket because it was damaged when pump was removed from bracket. Installed new wiring harness, bracket and pump. Ice maker is running again.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2313890
If your ice maker is leaking water or forming ice buildup around the fill area, a cracked or missing overflow tube may be the cause. Simple fix.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3400886
Genuine Whirlpool part
By: Whirlpool
Part Number: WP489443
8-16 thread screw secures panels, brackets, and trim inside refrigerators, dishwashers, and ice makers. Replace if missing, stripped, or damaged.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2185625
This water slide reservoir replaces the cracked or damaged reservoir that channels water to the dispenser/ice system, restoring a secure pathway for water and preventing leaks or loss of dispenser function. What it does:
- Collects and directs water from the inlet to the dispenser/ice mechanism
- Seals the water pathway to prevent leaks or puddling inside the cabinet
- Helps maintain proper water flow to the dispenser and icemaking components
- Commonly replaced for visible cracks, leaks, or reduced dispenser performance
What's included:
- One water slide reservoir
Install notes:
- High-level fit: installs in the dispenser/ice assembly per OEM diagram; verify placement before fastening
- Recommended safety: unplug or disconnect power and shut off water supply before service
- Use basic hand tools; avoid overtightening fasteners to prevent cracking the plastic
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11204894
Mounting bracket secures internal components in ice machines. Replace if cracked, broken, or damaged during pump removal to prevent loose parts and rattling.
Do-It-Yourself Stories from Customers like You
Recirculation pump burned out new pump required new wiring harness mounting bracket was cracked upon removal Lawrence J. • Austin , TX • January 24, 2026
Updated wiring harness to match connector on new recirculation pump. Had to replace mounting bracket because it was damaged when pump was removed from bracket. Installed new wiring harness, bracket and pump. Ice maker is running again.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP4387558
Fix excessive buzzing or rattling noise from your refrigerator's fan area. This rubber grommet cushions the fan motor mount to reduce vibration and noise.
Do-It-Yourself Stories from Customers like You
Start relay failed after power outage Keith B. • Middletown , CT • March 09, 2026
Replaced relay.
Ordered a spare one.
Also noticed fan motor sounded a bit funny so I ordered a spare one of those too.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2313624
Ice maker not producing ice or making thin patchy ice? A faulty condenser affects cooling efficiency. This condenser part restores proper freezing.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP488366
Secures flexible tubing to fittings on water and drain lines. Replace when clamps lose tension or you find leaks. Confirm fit with your model number.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10852725
Seals openings where hoses or wires pass through cabinet walls. Replace if cracked, torn, or missing to prevent chafing and vibration noise. Verify fit.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2310169
Wire harness for ice makers. Connects electrical components inside the unit. Replace if wires are frayed, damaged, or connectors are broken or melted.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3400909
Push-in nut for ice makers. Secures internal components during assembly and repair. Replace if missing, stripped, or damaged during maintenance work.
Do-It-Yourself Stories from Customers like You
Water leaking from lower pump Patrick G. • Cape Coral , FL • November 19, 2021
New water tray to fix the crack in the housing holding lower pump. Removed ice cutter, ice scoop holder, ice freeze plate water drain, water fill tube and cover over main water pump. With a nut driver and taking my time had everything removed, cleaned and reinstalled in less than 60 mins. Easy repair and saved a bundle on a service call. All my parts arrived well packed and in three days. I have used this supplier several times before and I give the five stars.
Read more
More