Kitchenaid Superba Range Parts

This foam pad installs between the inner and outer door panels of a dishwasher to dampen sound and help shield the outer panel from heat and moisture, keeping operation quieter and the door better protected. What it does:

• Lines the inside of the outer door panel to reduce operating noise and vibration
• Acts as a thermal and moisture barrier for the outer door panel
• Helps maintain proper door performance when the original insulation is worn or missing
• Replace if torn, degraded, or waterlogged, or if noise/condensation around the door has increased

• 1 door insulation pad

• Disconnect power and shut off water to the dishwasher before servicing
• Support the door; remove perimeter screws to separate the inner and outer door panels
• Note the pad's orientation; seat the new insulation evenly without pinching wires or harnesses
• Reassemble panels and fasteners; verify smooth door/latch operation

This is the third-level silverware basket for select dishwashers. It mounts on the top rack to organize utensils and small items, keeping them secure and properly positioned during the wash. What it does:

• Holds and organizes flatware and small utensils on the third-level rack
• Helps separate utensils to reduce nesting and improve spray coverage
• Keeps items from slipping through or contacting spray arms
• Replaces a cracked, warped, or missing third-level basket that allows rattling or loose utensils

• One third-level silverware basket

• Turn off power to the dishwasher before servicing
• Open the door and pull out the third-level rack
• Align the basket with the designated area and secure using the built-in tabs/clips
• Ensure the rack slides freely and the basket is firmly seated before running a cycle

This is the complete upper dishrack assembly for a dishwasher. It restores secure loading and organization on the top rack so glasses, bowls, and utensils are correctly positioned for consistent spray coverage and reliable cleaning. What it does:

• Holds and organizes dishes and glassware on the top level during wash cycles
• Maintains proper spacing to help water and detergent reach all surfaces
• Addresses common issues like broken/missing tines, peeling rack coating, bent frame, or rust
• Helps prevent items from tipping or shifting due to a damaged rack

• One dishrack assembly

• Disconnect power to the dishwasher before servicing
• Open the door; remove upper rail end caps/stops and slide the old rack out
• Transfer any reusable parts from the old rack (tine rows, clips, rollers/end caps) to the new assembly as needed
• Slide the new rack into the rails, reinstall stops, and verify smooth travel

A small replacement door switch that tells the appliance when the door is closed so cycles can start—restores proper door-sensing to resolve no-start, intermittent operation, or control lockout issues related to a faulty door switch. What it does:

• Detects door open/closed state and completes the control circuit when the door is shut.
• Prevents the appliance from starting or running when the door is open.
• Commonly replaces a worn or broken switch that causes no-starts, stops mid-cycle, or intermittent operation.
• Works as the door-sensing safety/switching component in the door latch/closure assembly.

• Disconnect power (unplug or switch off breaker) before inspecting or replacing the switch.
• Match connector terminals and orientation to the original switch; secure wiring and terminals firmly.
• Inspect door latch and strike for damage or misalignment when replacing the switch.

This is a dishwasher pump and motor assembly. The pump and motor sit at the bottom of the dishwasher. The pump moves water into the dishwasher and then up through the sprayers. It also pumps water out of the dishwasher and into the drain. The motor provides power to the pump, ensuring that it operates. Over time, both the pump and the motor will suffer from wear and tear through normal use. Signs that replacement may be needed include water remaining in the bottom of the dishwasher after a cycle, no water being sprayed during a cycle, or the machine being completely inoperable. To replace the pump/motor, first turn off the breaker to the appliance.This is a genuine OEM replacement part and is sold individually. It is compatible with Whirlpool, Jenn-Air, KitchenAid, and Kenmore dishwashers.

This is a 10-32 threaded machine screw used to fasten appliance panels and components securely. It restores proper fit and prevents rattling or loose parts when a missing or stripped fastener causes instability. What it does:

• Fastens panels, trim, brackets, and internal components that use 10-32 threads
• Restores secure fit when a missing or damaged screw lets parts shift or vibrate
• Helps eliminate rattling, loose connections, and alignment issues caused by lost hardware
• Works where a standard 10-32 machine screw is specified by the manufacturer

• Disconnect power and gas before accessing internal components
• Use the correct screwdriver or nut driver to avoid stripping the head
• Do not overtighten; snug until secure to avoid thread damage
• Keep removed hardware for reference and replace only with identical thread size

This fine screen is the small mesh filter that sits in the dishwasher sump to catch food particles and help protect the pump and wash system. It keeps debris from circulating so dishes rinse more effectively. What it does:

• Traps food and debris in the sump to prevent clogging and pump damage
• Helps maintain proper water flow for consistent wash and drain performance
• Reduces risk of food redepositing on dishes during cycles
• Commonly replaced when torn, heavily clogged, or missing

• One fine mesh sump screen

• Turn off power and disconnect the dishwasher before servicing
• Remove the lower dish rack and access the sump area to replace the screen
• Inspect surrounding seals and housing for damage while servicing
• No special tools typically required; handle mesh gently to avoid deformation

Right-side basket lid for top-load washers. Replaces a cracked or damaged right-side lid to help contain laundry, reduce splashing and restore the basket cover so the washer closes and operates as intended. What it does:

• Covers the right side of the inner wash basket and helps keep clothes from catching on the basket edge.
• Helps reduce water splash and keeps items contained during the wash.
• Restores proper fit and alignment of the basket cover area that may affect lid closing.
• Used when the original right-side lid is cracked, warped, or broken.

• Disconnect power and water supply before beginning service.
• Handle edges carefully; wear gloves to avoid sharp edges on broken parts.
• Installation typically requires removing the outer cabinet or basket access panels and securing the lid with existing fasteners — follow the model's service manual for exact steps.

This push retainer is a small press-on fastener that secures components to shafts or studs inside your appliance. It restores a tight, reliable hold so knobs, trim, or linkages don't loosen or fall off during use. What it does:

• Presses onto a shaft or stud to secure knobs, trim, or linkages—no threads required
• Maintains spring tension to resist vibration during normal operation
• Replaces a missing, bent, or weakened retainer
• Common symptoms: loose or wobbly knobs/trim, parts slipping off, or a retainer that won't stay on

• 1 push retainer

• Disconnect power; for gas appliances, also shut off the gas supply
• Access the shaft/stud and carefully remove the old retainer with pliers; avoid damaging adjacent plastic parts
• Press the new retainer on squarely using a deep socket or nut driver; do not hammer directly
• If the mating shaft or component is damaged or deformed, address that before installing the new retainer

This 10-24 threaded screw secures appliance components that use a #10 machine screw. It provides reliable fastening for panels, brackets, and assemblies so parts stay aligned and stable during normal use and service. What it does:

• Fastens panels, brackets, or assemblies that accept a 10-24 machine screw
• Maintains alignment and structural connection under normal operating loads
• Replaces worn, stripped, or missing screws to restore secure mounting
• Works with sheet-metal and component mating nuts or threaded inserts commonly used in appliances

• One 10-24 threaded screw

• Power tools can be used; avoid overtightening to prevent stripped threads or damaged components
• Disconnect power and follow all safety steps for your appliance before servicing
• Ensure proper engagement and torque to avoid damage

Color: Black

Color: White

This tab-sump mounting secures the dishwasher sump/dispenser area so detergent tabs and related components stay properly aligned. Replacing a worn or broken mounting restores correct dispenser positioning and helps prevent tabs from falling loose during cycles. What it does:

• Holds the tab/sump assembly in place to maintain proper detergent tab positioning
• Prevents the dispenser or sump from shifting or sagging during operation
• Helps reduce incidents of tabs dislodging or failing to stay seated
• Supports correct alignment of adjacent dispenser components

• Disconnect power and water supply before starting any repair
• Remove the door panel or access cover to reach the sump area
• Inspect surrounding clips and seals; replace any damaged fasteners for a secure fit

This replacement left-side lid for the silverware basket restores coverage and helps keep utensils contained during dishwasher cycles. It matches OEM fit and appearance so the basket functions as designed. What it does:

• Covers and secures utensils in the left section of the silverware basket
• Helps prevent small items from shifting or falling through during wash cycles
• Restores proper basket alignment for even water flow and rinsing
• Reduces the chance of utensil contact with rotating spray arms

• Snap-in replacement; no special tools typically required
• Remove the silverware basket to access and align the lid before snapping into place
• Inspect surrounding basket clips/rims for damage and replace if worn to ensure secure fit
• Disconnect power to the appliance and follow the manufacturer's safety instructions before servicing

This disk valve diverter directs wash water flow between spray arms and wash zones to restore proper circulation and cleaning performance. It replaces a worn or damaged diverter to help return consistent spray pressure and distribution. What it does:

• Routes pump water to the correct spray arm or wash zone during the wash cycle
• Helps maintain even spray pressure for effective cleaning
• Worn or broken diverter can cause poor cleaning, reduced water to a spray arm, or unusual pump noise
• Prevents bypass flow that can reduce wash performance

• One disk valve diverter as shown

• Disconnect power to the appliance and shut off the water supply before starting
• Access may require removing the tub access panel or disassembling spray arm/tub components
• Inspect surrounding seals and gaskets; replace any damaged parts to prevent leaks
• After installation, run a short cycle and check for proper water routing and leaks