Krfc704fss-01 Parts

This cabinet roller replaces a worn or broken roller to restore smooth opening and closing of the appliance drawer or cabinet. It reduces noise and sticking for improved everyday use. What it does:

• Replaces a damaged or worn cabinet/drawer roller to restore smooth gliding motion
• Reduces squeaking, sticking, or uneven travel when opening or closing the drawer
• Supports proper alignment of the drawer or rack during operation
• Helps prevent further wear to tracks and mounting hardware by restoring correct movement

• Disconnect power to the appliance before beginning any repair
• Remove the drawer or access panel to reach the roller; keep fasteners organized
• Inspect the track and mounting clip for damage; replace damaged hardware if found
• Reassemble and test drawer travel; no special tools typically required, but a screwdriver or pliers may help

A threaded screw used to secure appliance components where an 8-16 thread is specified. Provides a straightforward replacement fastener to restore original fit and keep panels, brackets, and internal parts held securely. What it does:

• Fastens panels, brackets, trim, and small assemblies that use an 8-16 threaded fastener.
• Replaces missing, corroded, stripped, or damaged screws to stop rattling, gaps, or loose parts.
• Restores reliable mechanical connection after service or part replacement.
• Compatible where the OEM specifies an 8-16 screw for mounting or securing components.

• Use the correct driver to avoid stripping the head; start threads by hand to prevent cross-threading.
• Tighten until secure but avoid over-tightening to prevent damage to mounting holes or plastic parts.
• If working near electrical components, disconnect power and follow all safety precautions.
• Inspect mating threads and replace if damaged before installing this screw.

The Fan Motor is an OEM replacement part for Whirlpool refrigerators. It is designed to provide cooling and ventilation to the condenser coils near the compressor, helping to dissipate heat and maintain the set temperature inside the refrigerator.

A bad condenser fan motor assembly can occur due to wear and tear, electrical issues, or damage to the motor or fan blades. If you notice symptoms such as the refrigerator not cooling properly, excessive heat near the compressor, or unusual noises coming from the back of the refrigerator, it may indicate a faulty condenser fan motor assembly.

Symptoms of a bad condenser fan motor assembly include:

• Refrigerator not cooling properly
• Excessive heat near the compressor
• Unusual noises coming from the back of the refrigerator

Restore your refrigerator by replacing the faulty or damaged condenser fan motor assembly with this genuine OEM part.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

This closer is the door hinge/closing component that controls how the appliance door moves and latches. It cushions and steadies the door for smoother closing and helps prevent slamming or doors that won't stay shut. What it does:

• Controls and cushions door travel so the door closes smoothly and reduces slamming.
• Helps the door engage the latch and stay closed; can address doors that drop or don't shut fully.
• Replaces worn or broken closers that cause uneven or noisy door movement.
• Works as a mechanical hinge/closing aid—not an electronic part.

• Disconnect power to the appliance (unplug or turn off breaker) before starting any work.
• Basic hand tools typically required (screwdriver, nut driver); remove any trim or panels per your service manual.
• Handle springs and hinge hardware carefully to avoid pinching; wear gloves and eye protection.

The Evaporator Cover is an OEM part for Whirlpool refrigerators. It is responsible for protecting the evaporator coils in the freezer section. The evaporator cover protects the evaporator coils from dust, debris, and frost buildup. This helps maintain proper airflow and temperature distribution throughout the refrigerator, ensuring your food stays fresh and cool.

A bad evaporator cover can occur due to regular wear and tear, accidental damage, or frost accumulation. If you notice symptoms such as poor cooling, frost buildup on the evaporator coils, or unusual noises coming from the refrigerator, it may be time to replace this part.

Symptoms of a bad evaporator cover include:

• Poor cooling performance
• Frost buildup on the evaporator coils
• Unusual noises coming from the refrigerator

Restore your Whirlpool refrigerator by replacing the damaged or worn evaporator cover with this genuine OEM part.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

This replacement extension secures and supports a factory component to restore proper fit and reduce movement. Use it to replace a worn or damaged extension that causes misalignment or loose panels. What it does

• Provides a mounting/extension point to hold adjacent panels or components in place
• Restores proper alignment to reduce gaps, rattles, or loose-feeling parts
• Replaces worn, cracked, or broken extensions that no longer secure components
• Helps maintain original fit and function after impact or wear

• One extension assembly

• Disconnect power to the appliance before starting any repair to avoid shock or injury
• Installation typically requires basic hand tools; access steps
• Handle plastic parts carefully to avoid cracking; do not force parts into place

Color: Biscuit. Size: 13 oz. can. Enamel spray paint.

A genuine replacement door closer that helps the appliance door open and close smoothly while holding proper alignment. Restores intended door motion to reduce slamming and misalignment for safer, more reliable operation. What it does

• Controls the door's opening and closing movement to prevent sudden drops or slams
• Helps the door stay properly aligned and seated when closing
• Reduces stress on hinges and latches caused by uncontrolled door movement
• Commonly used when door feels loose, won't stay open, or closes unevenly

• One door closer assembly

• Disconnect power and water (if applicable) before starting any repair
• Basic hand tools are typically required;
• Handle springs and tension components carefully; wear eye protection when working with tensioned parts

This cabinet roller replaces a worn or broken roller that helps a drawer or cabinet glide smoothly. Restores proper tracking and reduces sticking or grinding for easy opening and closing. What it does:

• Supports and guides the drawer/cabinet along its track for smooth movement
• Replaces damaged or worn rollers that cause sticking, binding, or uneven travel
• Reduces noise from grinding or scraping when opening or closing
• Helps prevent drawer misalignment and uneven wear on the track

• Inspect the track and mounting clips for damage; replace any broken components
• Remove power to nearby appliances and work with the drawer empty
• Use basic hand tools; avoid forcing parts—ensure the roller is seated fully in its bracket

This hex-head sheet metal screw secures refrigerator panels, brackets, and other internal components. Replacing a missing, corroded, or stripped screw helps keep parts tight, reduces vibration noise, and maintains proper alignment of covers and assemblies.

• Fastens sheet-metal panels, ducts, brackets, and trim inside the cabinet
• Helps maintain a secure fit and reduce rattles or buzzing
• Restores alignment when an original fastener is missing or damaged
• Common signs include loose or vibrating panels, a stripped screw head, or a screw that won't tighten

• Unplug the refrigerator and shut off water supply if working near ice/water components
• Use the correct nut driver or socket for the hex head
• Start threads by hand to avoid cross-threading; tighten until snug—do not overtighten
• Replace screws one at a time to help keep parts aligned

This clip kit secures small panels, wiring harnesses, or trim on compatible Whirlpool appliances to prevent rattling and keep components in their intended position. It restores proper fit and helps reduce noise from loose parts. What it does:

• Holds wiring harnesses and cables in place to prevent chafing or contact with moving parts
• Secures panels, trim, or hoses so assemblies stay aligned and quiet
• Reduces rattling, buzzing, or vibration caused by loose components
• Keeps parts positioned during normal use and transport

• Disconnect power (unplug or shut off breaker) before starting any repair
• Use basic hand tools; avoid forcing clips into place to prevent breakage
• Replace any damaged clips with the exact kit to ensure proper fit
• Re-check that fastened parts are secure and that there are no pinched wires before restoring power

This guide helps align and stabilize a refrigerator/freezer door or drawer so it opens and closes smoothly. Replace a worn or broken guide to restore proper movement and reduce rubbing, sticking, or misalignment. What it does:

• Centers and supports the door or drawer along its track for smooth operation
• Prevents the door/drawer from binding, scraping, or coming off the track
• Maintains correct alignment to ensure proper sealing and operation
• Reduces noise and uneven wear caused by a worn guide

• One replacement guide

• Disconnect power before servicing any appliance components to avoid shock
• Inspect mating track, screws, and mounting surfaces; replace any damaged hardware
• Installation typically requires removing the door/drawer or front panel for access
• Use basic hand tools; follow manufacturer service instructions for safe reassembly

This Drier Tube is an OEM part for Whirlpool Refrigerators. It plays a role in filtering and drying the refrigerant. Wear, leaks, or clogs can cause issues with this part.

What Causes a Bad Refrigerator Drier Tube:
Wear, leaks, or clogs within the tube can affect the refrigeration process or cause leaks.

Symptoms of a Bad Refrigerator Drier Tube:

• Insufficient cooling or freezing
• Refrigerant leaks or hissing sounds
• Excessive moisture around the tube area

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models. 

Color: White. Size: 13 oz. Spray paint primer. can.

This cantilever door bin mounts on the inner door to provide secure, convenient storage. Replacing a cracked or missing bin restores organized space for bottles and condiments and helps prevent items from tipping or falling when the door opens.

• Mounts to the door liner rails as a cantilever shelf to hold containers
• Keeps frequently used items organized and within easy reach
• Replace if the bin is cracked, broken, or warped
• Replace if tabs are worn, the bin falls off, won't stay seated, or is missing

• Disconnect power to the refrigerator before servicing
• Remove contents; lift the old bin up and out of the door ladder/slots
• Align the new bin with the slots and press down until fully seated and secure
• Verify the door closes freely and avoid overloading the bin