Krmf706ebs Parts

A replacement icebox rear gasket that seals the freezer compartment to help keep cold air in and reduce moisture intrusion. Restores the door seal to help maintain proper temperature and reduce frost buildup. What it does

• Seals the icebox/freezer door edge to maintain cold compartment temperature.
• Helps prevent warm air and moisture from entering, reducing frost and ice buildup.
• Can improve cooling consistency and help reduce excessive run time caused by a poor seal.
• Common symptom fix: visible gaps, torn or deformed seal, or recurring frost around the door.

• One icebox rear gasket.

• Disconnect power to the appliance before replacing the gasket.
• Remove the old gasket, clean the door/frame sealing surface, and align the new gasket evenly.
• Press the gasket into the channel firmly; some models may require gentle warming or minor adjustment for a snug fit.

This is a genuine mounting screw used to secure appliance panels and components. It provides reliable fastening to keep parts aligned and reduce vibration-related noise for safer, quieter operation. What it does:

• Secures panels, brackets, or small components to the appliance frame
• Prevents parts from loosening and causing rattling or misalignment
• Maintains proper part positioning for reliable operation
• Helps reduce vibration and noise when panels are fastened correctly

• Use the correct driver and size to avoid stripping the head
• Tighten until snug; do not overtighten which can strip threads or crack plastic
• Disconnect power before servicing electrical appliances to avoid shock
• If a screw is corroded or damaged, replace all similar fasteners in that area for best results

This drip tray collects and channels defrost and condensation water away from the refrigerator cabinet to prevent leaks and puddles. It helps keep the interior base area dry and directs meltwater to the drain system. What it does:

• Catches meltwater from the evaporator during defrost cycles to prevent pooling under the cabinet
• Channels water toward the refrigerator's drain system to reduce leaks and floor damage
• Helps limit ice buildup and moisture-related odors around the freezer base
• Common symptom: visible water or puddling under or beside the fridge, or excessive moisture in the base pan area

• One drip tray as shown

• Disconnect power to the appliance before servicing to avoid electrical shock
• Remove food and, if needed, the lower access panel or kickplate to access the tray
• Inspect adjacent drain tubing and grommets while replacing the tray to ensure proper drainage
• Reinstall panels and restore power; run a short defrost or water cycle to ensure proper drainage

This OEM grease is a purpose-made appliance lubricant that reduces friction and protects moving parts for smoother operation and longer component life. Use where specified by the manufacturer for bearings, slides, or motor shafts. What it does:

• Lubricates gears, bearings, rollers and shafts to reduce wear and noise
• Helps prevent binding, seizing, and grinding on moving components
• Protects metal parts from corrosion where grease is specified
• Keeps parts moving smoothly under normal operating temperatures

• Disconnect power before servicing any appliance; follow manufacturer service instructions
• Apply sparingly to clean, dry surfaces; avoid over-greasing which can attract debris
• Wear gloves and wipe excess grease from surrounding areas to prevent staining

This fan gasket seals the fan housing to help direct airflow and maintain proper cooling performance. It replaces a worn or damaged seal to reduce air bypass and improve temperature consistency in the appliance. What it does:

• Seals the fan housing to keep airflow directed through the evaporator/condenser as designed
• Helps prevent air leaks that can cause uneven cooling or longer run cycles
• Reduces the chance of frost buildup or moisture intrusion around the fan area
• Can minimize wind noise from air escaping gaps at the fan assembly

• Disconnect power to the appliance before beginning any repair
• Remove access panels and the fan housing to reach and replace the gasket
• Ensure the gasket seats evenly around the fan housing; trim none unless specified by the OEM
• Inspect surrounding components (fan blade, housing) for damage and replace if needed

Sealer for refrigerant line insulation.

This small mounting retainer clip secures panels, hoses, or wiring to appliance chassis to prevent vibration and movement. It helps restore proper routing and reduces rattles or chafing from loose components. What it does

• Holds trim, panels, hoses, or wiring in place to prevent rubbing and noise
• Restores correct component alignment after repair or maintenance
• Helps reduce vibration-related rattling and wear
• Simple replacement for a broken, bent, or missing clip

• One mounting retainer clip

• Turn off and unplug the appliance before inspecting or replacing clips
• Remove only the minimal surrounding parts needed for safe access
• Clip may require gentle pressure to seat; avoid forcing or prying on nearby plastic
• Replace all matching fasteners for secure fit

This upper left door hinge supports and guides the appliance door for smooth opening and secure alignment. Replacing a worn or damaged hinge restores proper door fit and helps prevent sagging or uneven seals. What it does:

• Provides the pivot point that lets the door open and close smoothly
• Keeps the door aligned to maintain an even seal and proper closing
• Prevents door sagging, rubbing, or misalignment that can cause gaps
• Works with the hinge pin and mounting points to support door weight

• Disconnect power to the appliance and remove food from the door area before starting
• Support the door while removing and installing the hinge to prevent dropping or damage
• Use the same mounting hardware unless replacements are specified; tighten fasteners securely but do not overtighten
• Inspect strike plates, lower hinge, and gasket for related wear

This shield is a replacement protective cover that helps protect internal components from heat, debris, and contact damage. It restores the appliance's original protection and helps prevent damage to wiring and nearby parts. What it does:

• Covers and protects internal components or wiring from heat and physical contact
• Helps prevent debris buildup and reduces risk of shorts or damage to nearby parts
• Use when the original shield is cracked, warped, missing, or shows heat damage
• Restores the correct barrier needed for safe, reliable operation

• One replacement shield

• Disconnect power (unplug or shut off breaker) before servicing
• Handle carefully—edges may be sharp; wear gloves and eye protection
• Install in the same orientation as the original; secure with existing fasteners
• Use only the exact replacement part number to maintain proper fit and safety

A small replacement retainer that secures internal components and trim pieces so they stay properly aligned and stable. Restoring a broken retainer helps stop rattling and keeps parts seated for reliable operation. What it does:

• Secures panels, trim, or small assemblies in place to prevent shifting
• Reduces vibration and rattling caused by a loose or broken clip
• Keeps wiring or hoses routed and held away from moving parts
• Helps maintain proper alignment of the part it supports

• Disconnect power to the appliance before servicing to avoid shock
• Use basic hand tools; inspect surrounding parts for damage before reinstalling
• Handle sharp sheet-metal edges carefully and wear gloves if needed
• Replace only the failed retainers; verify fit before final reassembly

This support is a replacement mounting bracket that secures internal components and panels so they stay properly aligned and stable. It restores correct fit and reduces movement from normal use. What it does:

• Provides a secure mounting point for internal panels or components to prevent sagging or rattling
• Restores alignment for panels that sit uneven or loose
• Helps stop vibration noise caused by worn or broken supports
• Protects connected parts from stress or damage due to improper support

• One support

• Disconnect power to the appliance before starting any repair
• Basic tools typically required; handle parts carefully to avoid scratching or bending
• Keep fasteners and hardware; replace any damaged screws or clips as needed
• Refer to the parts diagram for exact placement and torque specs

This replacement glass shelf restores a flat storage surface inside the refrigerator, giving you a stable, easy-to-clean spot for food and containers. Designed to match the original fit and function. What it does:

• Replaces a cracked, chipped, or missing refrigerator shelf so items sit level and stable.
• Provides a smooth surface that helps keep spills contained and makes cleanup easier.
• Fits into existing shelf rails or supports to restore normal shelving layout.
• Helps prevent items from shifting or falling through damaged shelving.

• One (1) glass shelf

• Remove all food and containers before replacing the shelf.
• Slide the shelf into the existing shelf rails or supports; do not force or bend rails.
• Handle glass with care and wear cut-resistant gloves to avoid injury.
• Replace those parts before installing the new shelf.

This mullion rail is the interior trim piece that covers and protects the vertical mullion area between refrigerator doors, restoring a finished look and helping maintain an effective door seal. It replaces cracked, warped, or broken mullion trim. What it does:

• Covers the vertical mullion area to protect underlying components and provide a smooth finished surface.
• Helps maintain proper gasket alignment for a tighter door seal.
• Prevents drafts and reduces the chance of cold air leakage around the door edge.
• Restores appearance when the original trim is cracked, dented, or discolored.

• One mullion rail trim piece.

• High-level, snap-in or screw-in replacement—remove the old trim before installing the new piece.
• Disconnect power to the appliance only when working near electrical components; otherwise no electrical disconnection is typically required.
• Use hand tools and avoid excessive force to prevent damage to the surrounding door or seals.
• If clips or fasteners are damaged or missing, replace them with OEM equivalents for secure fit.

This center pantry adapter assembly secures and aligns the pantry door components for smooth door movement and consistent sealing. It replaces a worn or damaged center adapter to restore proper pantry door fit and operation. What it does:

• Centers and stabilizes the pantry door connection for proper alignment
• Provides a secure mounting point to prevent door sagging or misalignment
• Helps maintain an even seal to reduce drafts and maintain internal temperature
• Commonly replaced when the pantry door wobbles, binds, or fails to latch properly

• One center pantry adapter assembly

• Basic hand tools typically required; inspect surrounding hardware for wear during replacement
• Disconnect power to the appliance or follow manufacturer safety guidance before beginning work
• Tighten fasteners to manufacturer specifications and door alignment after installation
• If other door components are damaged or bent, replace those parts as needed for proper function

This door shelf bin cantilever replaces a cracked or worn refrigerator door bin assembly to restore secure storage on the fridge door. It provides a sturdy shelf edge and latch support so door bins stay in place and hold items safely. What it does

• Secures and supports a refrigerator door shelf, preventing the bin from dropping or slipping
• Restores proper bin alignment and latching when original cantilever or shelf edge is broken
• Helps eliminate rattling or misalignment of stored bottles and containers
• Useful when the door bin no longer stays seated or has visible damage

• One door shelf bin cantilever assembly as shown

• High-level replacement; access the door interior by removing items and, if needed, the full door bin per your model's service instructions
• Use basic hand tools; avoid overtightening fasteners to prevent cracking nearby plastic
• Disconnect power only if service requires removing electrical components; otherwise unplugging is not typically necessary for bin swaps
• If damaged mounting clips or screws are present, replace them to ensure a secure fit