Ksm5ppwh Parts

5 Quart Polished Stainless Steel Bowl with flat handle for KitchenAid Bowl-Lift Stand Mixers. The 5 quart polished stainless steel bowl has enough capacity to mix dough for 9 dozen cookies, 4 loaves of bread or 7 pounds of mashed potatoes in a single batch. For quick and easy clean up, the bowl is dishwasher-safe on the top-rack. The 5 quart polished stainless steel bowl fits KitchenAid Stand Mixer models K5SS, KDM5, KP50, KPM5, KPM50, KSM5, KSM50, KSM500, KSMC50, 3K5SS, 4K5SS, 4KPD1620, 4KSM50, 5K5SS, 5KPM50, 5KSM5, 7K5SS.

This power cord supplies electricity from the wall outlet to the appliance. Replace a frayed, cut, or overheated cord to restore safe, reliable power and prevent issues like no power, intermittent shutdowns, or nuisance breaker trips.

• Delivers AC power from the outlet to the unit's internal wiring/terminal connection
• Common symptoms: appliance won't power on, power flickers when cord is moved, tripped breaker/GFCI, visible cracks, burns, or melted insulation
• Replacing a damaged cord reduces shock and fire risk from exposed or overheated conductors
• Built for specific models—use the exact cord specified for your appliance

• Unplug the appliance and switch off power at the breaker before servicing
• Match conductors per your model's wiring diagram; confirm ground connection to chassis where applicable
• Route through the original strain relief/grommet and secure; keep clear of sharp edges, hot surfaces, and moving parts
• After installation, check for a snug plug fit and test operation

A straight cotter pin that secures shafts, linkages and hinged components to prevent parts from sliding off during operation. Simple, durable fastener that restores proper alignment and keeps moving parts locked in place. What it does:

• Holds clevis pins, shafts or rods in position to prevent accidental disengagement
• Keeps door hinges, linkage arms and agitator/drive components secured
• Helps stop wobbling, rattling or separation caused by a missing or bent fastener
• Works as a reliable locking clip where a split-pin style retainer is required

• Verify size and orientation against the original pin before installation
• Use pliers to spread the legs and secure the pin; bend the ends as needed
• Replace any bent or excessively corroded pins rather than reusing
• Wear eye protection and disconnect power or move components to a safe position before working

This pivot screw secures a hinge, lever, or linkage to its bracket to create a stable pivot point. Replacing a missing or stripped screw restores proper alignment and smooth movement of the assembly.

• Fastens a pivoting component to its mounting point
• Maintains alignment and smooth, controlled motion at the pivot
• Helps prevent looseness, wobble, or sag at the joint
• Common symptoms include a missing/loose screw, binding movement, rattling, or uneven gaps

• Disconnect power; shut off gas/water if applicable before servicing
• Support the hinged or moving component to remove load from the pivot
• Remove the damaged screw and start the new screw by hand to avoid cross-threading
• Tighten snugly without over-torquing; replace companion bushings or washers if worn

This pan head machine screw (5/16-18 x 3/4) secures appliance components such as brackets, panels, and assemblies. Replacing worn or missing hardware restores a tight, rattle-free fit and keeps parts aligned for reliable operation.

• Provides a 5/16-18 threaded fastener for mounting or securing components
• Replaces stripped, corroded, or missing hardware to restore fastening strength
• Helps reduce looseness, vibration, rattling, or gaps
• Supports proper alignment of panels, brackets, and hardware

• Disconnect power and shut off gas/water to the appliance before servicing
• Support the component and start threads by hand to avoid cross-threading
• Tighten securely but do not overtighten to prevent thread or material damage
• Reuse any original washers or lock hardware if applicable and verify length/thread match with the old screw

This flat washer provides a durable spacer and load-distribution surface for fasteners in laundry appliances, helping secure components and reduce wear. It's a simple replacement that restores proper fastening and alignment where a worn washer is causing issues. What it does:

• Distributes nut/bolt pressure to protect mounting surfaces and prevent loosening
• Maintains correct spacing and alignment of panels, brackets, or moving parts
• Helps reduce vibration-related noise and abrasion at fastener points
• Common symptom: loose or rattling panels or hardware where a washer has deteriorated

• One flat washer

• Turn off power and unplug the appliance before accessing panels or hardware
• Remove the fastener, replace the old washer with the new one, and re-torque to the OEM-recommended specification
• Inspect surrounding hardware and replace any damaged screws or nuts for a secure repair

This cobalt blue replacement cover restores the appliance's exterior look and protects internal components from dirt and wear. It fits where the original colored trim or panel cover has become cracked, faded, or missing. What it does:

• Replaces a damaged or worn cobalt blue cover to renew appearance and finish
• Shields underlying components from dust and debris
• Helps prevent small items from entering openings behind the cover
• Commonly used when the original cover is cracked, chipped, faded, or broken

• Disconnect power to the appliance before beginning any work to avoid shock or injury.
• Installation typically requires only basic hand tools; follow the appliance's service instructions.
• Handle edges carefully — clips or tabs can be sharp or brittle on older parts.
• Only install a part that matches the appliance's original location and attachment points; do not force or modify the part.

This replacement planetary assembly restores proper drive alignment and support for rotating components in select laundry appliances, helping reduce noise and vibration while returning smooth drum rotation. What it does:

• Transmits rotational force between the drive system and rotating drum components
• Supports alignment of the rotating assembly to prevent wobble or irregular movement
• Helps eliminate grinding, clunking or unusual noises caused by worn planetary components
• Resolve intermittent or complete loss of rotation when the planetary is worn or damaged

• Disconnect power and follow lock-out/tag-out before starting any repair
• Basic hand tools are typically required; refer to the appliance service manual for exact procedure
• Inspect adjacent parts (gears, bearings, seals) and replace if damaged

This 6-32 machine screw is a direct-fit fastener used to secure appliance panels and components. It provides a reliable replacement for stripped or missing screws to restore proper fit and reduce vibration or looseness. What it does:

• Secures panels, brackets, and internal components to keep parts aligned and stable
• Restores proper fastening when original screws are missing, stripped, or damaged
• Helps eliminate rattling or movement caused by loose fasteners
• Compatible with metal-to-threaded-hole connections that use 6-32 hardware

• Use the correct driver and avoid over-tightening to prevent stripped threads or damaged components
• Disconnect power and follow appliance safety guidelines before servicing
• If threads are damaged, replace both screw and any damaged insert or nut as needed

This is a genuine replacement screw used to secure panels, brackets, and components on compatible Whirlpool appliances. It restores proper fastening so loose parts stop rattling and panels stay aligned. What it does

• Fastens trim, panels, brackets, or mounting hardware to appliance chassis
• Helps stop vibration and rattling caused by missing or stripped fasteners
• Restores secure connections after repair or part replacement
• Matches OEM thread specification to fit intended mounting holes

• Disconnect power to the appliance before beginning any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Start threads by hand and tighten until snug; do not overtighten
• Inspect mating threads and replace if damaged

This refrigerator water filter replaces your fridge's internal filtration cartridge to help restore clear, better-tasting drinking water and ice. Simple to swap, it helps maintain household water quality when performance declines. What it does:

• Traps sediment and particulates to improve water clarity
• Reduces chlorine taste and odor for fresher-tasting water and ice
• Helps prevent scale and particulates from reaching dispenser and ice maker
• Common symptoms: cloudy or bad-tasting water, off-odors, or reduced water flow from dispenser

• Turn off the water supply and follow the refrigerator manufacturer's removal instructions before replacing the filter.
• Push/turn or slide new filter into the filter housing until it seats; follow OEM instructions for your model.
• After installation, flush several quarts of water through the dispenser to clear air and any loose carbon residue.
• Replace at recommended intervals and discard used filters per local regulations; do not use with water that is microbiologically unsafe without adequate disinfection.

This insert is a small, model-specific fitting that seats inside its assembly to align and secure the mating component. Replacing a cracked or missing insert restores a tight fit, correct positioning, and smooth operation.

• Provides the alignment/seating interface within the related assembly
• Helps the attached part fasten and sit properly
• Restores correct spacing and positioning for smooth operation
• Symptoms include a missing/broken insert, loose or wobbly component, difficulty securing or closing, or visible gap/misalignment

• Unplug the appliance and shut off water/gas before service
• Refer to your model's parts diagram for exact placement and orientation
• Transfer/reuse any original screws, clips, or fasteners as required
• Do not overtighten; confirm alignment and test operation afterward

This replacement screw is a direct-fit fastener used to secure appliance panels and components, restoring proper fit and reducing movement. Ideal when original screws are stripped, missing, or damaged. What it does:

• Secures panels, trim, brackets, and other serviceable components to prevent rattling or misalignment
• Matches original fastener form for correct fit and reliable function
• Helps restore proper clearance and component alignment after repair
• Safe, general-purpose replacement for common appliance fastening needs

• Turn off power and disconnect the appliance before accessing internal components
• Use the correct screwdriver or bit; avoid overtightening to prevent thread or part damage
• Keep hardware and small parts away from children and pets

A replacement support mounting bracket that holds and stabilizes internal components for proper alignment and smooth operation. Restores secure positioning to reduce noise and wear from loose or shifted parts. What it does

• Provides a stable mounting point to keep panels, housings, or assemblies aligned.
• Helps prevent vibration and rattling caused by worn or broken supports.
• Restores correct part spacing to reduce stress on adjacent components.
• Commonly replaced when parts sag, vibrate, or fail to remain securely positioned.

• One replacement support mounting bracket.

• Basic hand tools typically required; follow your appliance's service instructions.
• Disconnect power before starting any repair to avoid shock or injury.
• Inspect surrounding clips, screws, or fasteners and replace if worn.