Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Charcoal filter eliminates odors in your trash compactor. Replace every 2-3 months or when odors appear. Confirm fit with your model number.
This trash compactor is in our vacation home. We never use it and now we are selling the house. When I looked to replace it I was amazed at how expensive a new compactor would cost. I found the serial number on the current compact entered it and your web site came up. Your schematics were excellent and made the repair very easy! Read more
Fix a stuck or difficult-to-open compactor drawer with this replacement foot pedal. Restores hands-free drawer release and smooth latch operation.
After trying extra screws on the pedal and rails, I read how others had fixed a similar problem by purchasing the rollers that mount on the rails at the opening. I decided to replace all of the rollers and the pedal, just in case the pedal had worn at the contact area. We have cycled the machine 3-4 times with the new parts and I can still open the door with about the same amount of force as when it was new. I just followed the instructions that were included except I had to take the front... Read more
Size: 8-18 x 1/2 inch.
Whenever the drawer was opened, it would fall of the guide rails. This lead to the drawer being crooked several times. I took the drawer out and noticed one of the glides was missing. Ordered a new pair, popped it on and now the drawer slides properly. Read more
Replacement fastener screw for appliances. Secures panels, trim, clips, and components. Needed when original screws are stripped, missing, or damaged.
Removed the handle with two screws on the inside front and pulled out the custom wood panel. Pulled the compactor out from under cabinet. Tipped it over on back of unit, supporting it with a little foot stool. Unscrewed two lower screws at bottom of unit holding black trim panel (that held wood panel in place) and lower black rubber flap. Removed two screws on lower outside side of unit that held the foot pedal. Slid off black U shaped metal frame from top of compactor towards bottom. Slid on... Read more
For use on power screw and ram pressure pads. Size: 4 oz. can.
Replace element Read more
Fix a refrigerator light that won't turn on or off when you open the door. This push-button switch senses door position. DIY repair in 30 minutes.
We actually were able to determine that one of the freezer switches was bad and taped it down for about 3 days. The beeping stopped. Our fridge has two freezer switches and one fridge side switch. I ordered all three from these guys. They were cheaper than Whirlpool by about $20 for parts and about $15 for shipping. The part numbers had superseded too many times to count, usually that doesn't matter but in this case it did. The new parts were just slightly bigger than the old parts AND... Read more
Fix a compactor that won't start, stops mid-cycle, or requires holding the pedal down. This drawer tilt switch is a quick 15-second replacement.
I replaced the upper switch that contacts the door in a closed position and more important the start switch contacted by lifting the start pedal. Read more
Size: 8-32 x 3/8 inch.
Bottle with brush. Color: Black. Size: 0.6 fl.oz.
Replaced It With New One Read more
Replaces a broken, cracked, or missing air freshener cover on your trash compactor. Shields and secures the charcoal deodorizer cartridge in place.
Repair was very easy took me about five minutes Read more
This rotary start-run switch controls power to the appliance motor. Turning the knob engages the motor circuit to start and keep it running, restoring reliable on/off operation when the original switch wears out.
Replaced the on off switch. Read more
If your compactor knob is cracked, stripped, or won't stay in place, this white rotary switch knob restores secure control. Easy DIY installation.
This deodorant insert helps neutralize and absorb odors inside the appliance, keeping the interior fresher between uses. Replace the insert when its scent fades or odors persist even after cleaning.
Fix a compactor that won't stop at the end of its cycle or makes banging noises. This ram stop limits ram travel for proper positioning. Easy DIY fix.
Secures the rotary control switch to your trash compactor's front panel. Replace if stripped, missing, or loose to keep the control knob stable and aligned.
Replaced nut and knob. Read more
Mounting stud secures components in your trash compactor. Replace if worn, stripped, or missing to restore solid fit and reduce looseness or vibration.