Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Color: Black - Part has been changed to an Access Panel Kit - The toe panel is no longer used.
Kick plate was easy; screw holes in the wrong place, but used double-sided tape instead and worked great. Didn't need the extra screws ordered; it came with them. The roller spindles should be sent with a packet of grease. When replaced, the door was even louder than previous. Used candle wax on the spindles and it's quiet as can be now. Read more
Goes from pump to exterior drain hose.
I figured out that it was probably a plugged pump hose, since the pump would run, it somtimes it drained and sometimes it didn't. Your video helped with how to take the dishwasher out and replace the hose. I replaced the hose and everything is now working fine. It turned out to be a broken check valve in the old hose that caused the problem. It took 90 mins to do the repair. Read more
Overfill control.
Replaced float switch and also replaced intake valve. Worked like a charm and the process was as easy as the YouTube video I followed made it seem. Read more
This factory-specified screw secures panels, brackets, and internal components in your appliance. Replacing worn or missing hardware restores a tight fit to help reduce vibration, noise, and premature wear.
My son fixed the issue of some wear and tear. Read more
This inlet protector is the coarse screen that covers the dishwasher's pump/sump inlet, blocking large debris from entering the wash system. Replacing a damaged or missing protector helps maintain water flow and protect the pump from jams or wear.
Looked at Dishwasher. Scratched head and armpit. Told wife I would fix, not repariman. Wife skeptical - shook head. Found schematic on web. Found YouTube video of guy repairing same DW model. Disassembled. Diagnosed problem. Chopper assembly welded in place by water scale -broke removing. Potty mouth. Ordered parts. Waited for parts. Washed dishes by hand. Wife doing ok. Parts arrived (in only a day or two!!! Fed Ex for 7 bucks!! Great deal). Put on nasty t-shirt, baggy shorts. ... Read more
This overfill float and shaft assembly monitors the dishwasher's water level. As the tub fills, the float rises and triggers the float switch to shut off the inlet water, helping prevent overfilling and leaks.
Removed bottom cover, located leak at float switch, removed and replaced float switch kit. The toughest part of the repair was removing the Float & Retainer Assembly (in the interior of the machine tank) which broke when I pushed it back and pulled it straight up as suggested in the service manual. The Float Switch Kit (attached to, and below the float, below and outside the tank) has a folding plastic cover which fastens with plastic clips. If you open the switch kit before removing the... Read more
Bottle with brush. Color: Black. Size: 0.6 fl.oz.
Replaced It With New One Read more
This hanger anchors the dishwasher's door-balance spring to the frame so the door opens and closes smoothly. Replacing a worn or broken hanger restores proper spring tension and helps prevent a door that drops, slams, or feels heavy.
Installed new part Read more
Color: light gray. Measures about 3 inches high by 6 inches deep.
Part needed replacement Read more
The Rinse Aid Cap seals the dishwasher dispenser's rinse aid reservoir. Replacing a worn, cracked, or missing cap prevents leaks and evaporation, helping the dispenser meter rinse aid properly during the final rinse.
Got a new one Read more
Color: gray. Measures about a 1/2 inch wide by 3 inches high by 1-1/2 inches deep.
To eliminate ordering parts that are working, I went to hardware store to get a multimeter to test and confirmed the continuity of the themal fuse and the door switches are working. Saw another reviewer post a similar problem and I went with the solution by replacing the panel-ctl. Ordered the part, replaced it after receiving the delivery package, turned the breaker back on, ran a test cycle, et voila, it works as new. Sidenote, to reset the dishwasher, I pushed " hi-temp dry, "energy... Read more
Size: 1/4 inch hex head, 10-12 x 1/2 inch.
This trash compactor is in our vacation home. We never use it and now we are selling the house. When I looked to replace it I was amazed at how expensive a new compactor would cost. I found the serial number on the current compact entered it and your web site came up. Your schematics were excellent and made the repair very easy! Read more
Bottle with brush. Color: Biscuit paint. It's point-six fluid ounces.
Ordered 2 infinite burner controls from Appliance Parts Pros and watched the online video on the replacement of them at the same time. When they arrived promptly, I was ready to take on the job. The fix only took about 15 minutes because I was prepared after watching the video. Read more
To order seal use WP8268340.
This user interface mounts in the dishwasher door and contains the keypad you press to choose cycles and options. Replacing a failing UI restores responsive controls and reliable communication with the main control so the cycle can start and run.
User interface board was the problem. All other components checked out fine. Followed most likely failures as listed in your instructions. Works great!!!! Thanks Appliance Parts Pros! Read more
Almond. Size: 13 oz. can. Acrylic appliance paint.
Was able to match it pretty well the natural age difference was good. The delivery of the product was amazing it took less than 24 hours to get to me and that was standard shipping. Give you guys an A for great !! Read more