Kuds01fkpa Parts

This pump sump screen filters lint, debris and small objects from wash water before it reaches the drain pump, helping prevent clogs and pump damage. Replace a cracked or clogged screen to restore proper draining. What it does:

• Captures lint, coins, hair and small debris before the drain pump
• Helps prevent pump blockages that cause poor draining or standing water
• Reduces wear on the drain pump by stopping larger debris
• Improves overall drain performance when the existing screen is damaged or clogged

• Disconnect power and water before accessing the pump area
• Remove the washer access panel or cabinet per your model's service instructions to reach the sump
• Inspect and clean surrounding areas and the pump inlet when replacing the screen

A small replacement retainer that secures the FlexRow assembly so the component stays aligned and stable during use. Replacing a worn or broken retainer restores proper positioning and reduces movement. What it does:

• Holds the FlexRow assembly in place to prevent shifting or sagging
• Helps maintain correct alignment for even operation
• Stops clicking, rubbing, or intermittent contact caused by a loose assembly
• Prevents additional wear on adjacent clips or mounts

• Disconnect power to the appliance before beginning any repair
• Removal usually requires releasing adjacent clips or fasteners; basic hand tools may be needed
• Inspect surrounding parts and replace any damaged clips or mounts for a secure fit

This dual positioner assembly helps align and hold the control shaft/knob mechanism so selections register correctly and controls operate smoothly. It replaces a worn or broken positioner to restore reliable selector alignment. What it does:

• Secures and centers the control shaft/knob so detents register properly
• Prevents loose or wandering knobs and helps ensure accurate cycle selection
• Commonly replaced when knobs feel sloppy, skip positions, or controls don't stay set
• Works with the control panel mounting to stabilize selector movement

• Disconnect power to the appliance before starting any work
• Remove the control panel or console to access the positioner per your model's service instructions
• Handle plastic tabs and mounting points carefully to avoid breakage during removal/installation
• Test control function after reassembly to confirm correct alignment and operation

This inlet water bezel is the trim piece that fits around the washer's water inlet to provide a finished opening and support the inlet connection. It restores appearance and helps position the inlet area for a proper hose fit. What it does:

• Covers and finishes the water inlet opening on the cabinet for a clean appearance
• Helps hold and align the inlet connection and hose to reduce stress on the valve
• Prevents direct contact between the inlet hose/valve and the cabinet edge
• Commonly replaced when the inlet trim is cracked, broken, or worn

• Disconnect power and shut off the water supply before starting
• Remove the appropriate access panel or control console to reach the inlet area
• Handle the bezel carefully to avoid scratching painted surfaces during install
• Re-check inlet hose routing and tighten connections; test for leaks after restoring power/water

This console assembly replaces the external control panel and button interface so you can restore user controls and display feedback on your appliance. It provides the finished bezel, buttons, and underlying electronics as a single service-ready piece. What it does

• Replaces a damaged, cracked, or cosmetically worn control console so buttons and labels are legible and accessible
• Restores unresponsive or intermittent button presses when underlying key switches or board are faulty
• Replaces a console with missing or faded markings that make cycle selection difficult
• Helps resolve display backlight or indicator issues when caused by the console assembly

• One console assembly (control panel) as shown

• Disconnect power to the appliance before beginning service to avoid electrical shock
• Typical replacement requires removing the access panel or console trim and unplugging wiring connectors; handle the display and lenses carefully to avoid scratching
• Transfer any needed brackets, overlays, or mounting clips from the old console if they are not pre-attached

Color: White. Size: 1 qt. can. Acrylic appliance paint.

This replacement vent directs and controls airflow inside the appliance to restore proper ventilation and help maintain performance. Fits where the original vent is cracked, clogged, or damaged. What it does:

• Channels air through the appliance to support normal airflow and operation
• Helps prevent airflow restrictions that can cause poor performance or overheating
• Replaces damaged, broken, or warped vents that no longer seat or seal properly
• Suitable when original vent shows visible damage, cracking, or warping

• One vent

• Basic hand tools typically required; for access instructions
• Disconnect power (and water, if applicable) before beginning any service
• Handle plastic parts gently to avoid cracking; ensure vent seats evenly and secures to mounting points

This control panel is the exterior trim that houses your appliance's controls and display, restoring a finished appearance and reliable button access for normal operation. What it does:

• Replaces damaged, cracked, or worn control-panel trim to restore cosmetic appearance
• Provides the mounting surface and openings for buttons, knobs, and the display
• Protects internal control components from spills and everyday wear
• Helps ensure consistent button/selector alignment for proper user input

• One control panel as shown

• Disconnect power to the appliance before starting any work
• Remove surrounding trim and fasteners to access and replace the panel; keep track of small screws and clips
• Handle the panel carefully to avoid scratching or bending during installation
• Transfer components exactly as removed

Bottle with brush. Acyrlic touch-up paint. Color: Hunter green. Size: 0.6 fl.oz.

The Upper Wash Arm is an OEM component specifically designed for Whirlpool dishwashers. It is responsible for spraying water across the upper rack during the wash cycle to effectively clean dishes. It measures approximately 7.5 inches long by 1.37 inches wide.

Causes of a bad upper wash arm can include mineral or lime scale buildup that clogs the spray nozzles, or damage to the arm itself such as cracks or breaks that compromise its spraying ability.

Symptoms of a bad upper wash arm include:

• Inadequate cleaning of upper rack dishes 
• Dirty dishes after a cycle
• Clogged or blocked spray nozzles
• Visible damage or wear to the arm

This OEM replacement wash arm from Whirlpool is compatible with KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models as well.

The Whirlpool push on retainer nut is an OEM replacement part responsible for securing the heating element in the dishwasher. It is located in the base of the dishwasher's tub to hold the heating element firmly in place. The push-on retainer nut keeps the heating element securely connected to the dishwasher's electrical system while allowing for easy removal and replacement when necessary.

Over time, push on retainer nuts can become loose, worn out, or damaged due to regular use, vibrations, or accidental mishandling. If a retainer nut fails, it can lead to parts becoming unstable or disconnected.

Symptoms of a bad push on retainer nut include:

• Loose or unstable dishwasher components
• Parts falling off or becoming misaligned
• Unusual noises during the wash cycle
• Difficulty in securing components within the dishwasher

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models

The Dishwasher Drain Pump is an OEM part for Whirlpool dishwashers. It is responsible for removing water from the dishwasher at the end of each cycle, ensuring that dishes are properly cleaned and dried.

Causes of a bad drain pump can include wear and tear from regular use, blockages from debris, or electrical malfunctions.  

Symptoms of a bad drain pump include:

• Water not draining from the dishwasher
• Unusual noises during the drain cycle
• Error codes related to drainage issues
• Water pooling at the bottom of the dishwasher

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.