La5550xtwo Parts

Replaced both inlet and outlet side of pump hoses. Removing the machine cover was the most difficult part of the entire project, and it was not hard at all after watching your "How to" videos. Thanks for excellent service. Read more

Followed online video. It was easy Read more

• Leaking

Took off cover, installed new parts. Read more

I had to replace the drive shaft and the lower agitator. The motor coupling was also worn out. The repair was challenging because I had to rebuild the gear box. This step was really messy and I had to wait for the liquid gasket to set prior to completing the repair. Cleaning and prep of all of the parts tripled the repair time. Read more

I replaced the timer, and the problem was solved. The only problem I had was the screw holes in the new timer would not accept the screws from the old timer, so I used self tapping screws. Otherwise, a straightforward fix and fairly easy to do. Read more

Researched this kenmore washer on-line and found the problem to be the lid switch. Saw a diagram on how to jump this switch by connecting a wire to both outside wires on the harness and voila! It worked! This is not a fix but it allowed me to finish the load of unwashed clothes and told me which part was bad (do not run washer jumped like this.......fire hazard!) Ordered the lid switch and it was an easy repair. A $14.00 switch was a lot cheaper than a $450.00 washer. Thanks appliance parts... Read more

Removed the screws, lifted the old lid out of the hinges. Replaced the hinges, set new lid in the hinges and replaced screws. Read more

I bought a clutch liner kit installed it in 5 minutes now it spins faster than ever. Read more

• Leaking

Replaced with new part ordered from store Read more

I used a screwdriver and removed all three screws and replaced them with ones I ordered from you. The job took less than ten minutes to complete. Read more

With the parts supplied from your company. The lady that took my order was good at her job. All the parts were correct and fit. I thank you for the service that recieved. Read more

Beyond the excellent repair videos, a couple of tips: 1) with the agitator stripped, there is no way to hold the transmission from turning while trying to break loose the agitator screw - defeat the lid switch, set the machine to agitate and work the socket wrench against the motor. 2) the videos call for the use of penetrating oil when trying to free the spanner nut. This won't dissolve the many years worth of laundry detergent. Use vinegar to dissolve the soap first, then use the... Read more

First I looked at the many you tube vids, and there are many. appliance parts pros pretty much shows you how to deal with the parts. I changed the brake shoes and the clutch assembly which also comes with the driver cam. I also changed the metal brake operating cam. I think that brake lockup or improper brake release was the problem that broke the plastic cam driver. This was the broken plastic part making all the ticking noise. I first changed the coupling on the motor but that wasn't bad. in... Read more

Fixing the problem was quite simple. First, I removed the lid assembly (thanks to the diagrams supplied by AppliancePartsPros.com!). Getting the back two screws out was very difficult because I couldn't see them from the front and I could not move the unit out of the enclosed space. After some trial and error, I located the screws which were 5/16 hex head screws and removed them with a MAGNETIC nut driver. (The magnet assures that the screw will not drop down into the mechanism). Second, I... Read more

Just took off the old vacuum break and put the new one on. It was very easy because the site had a video showing how and I watched it first. Read more