Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Law94aal Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Cover
Genuine Whirlpool part
By: Whirlpool
Part Number: W10850494

 

More
Brake Rotor Bearing
Genuine Whirlpool part
By: Whirlpool
Part Number: WP200835

Lower brake bearing

Do-It-Yourself Stories from Customers like You After a process of elimination it turned out to be the brake assembly   Ken M. • Pierson , MI • September 13, 2016

I first replaced the two drive belts and the motor springs. That didn't fix it although they did need replacing. I then replaced the two bearings and the brake assy. The washer runs like new. If you replace the brake assembly, you should also replace the bearings. It will save a tear down later on. The Maytag repairman wanted $600.00 dollars to do the job. I did it for less than $200.00. Read more

More
Agitator W
Genuine Whirlpool part
By: Whirlpool
Part Number: WP207228

 

More
Rubber Seal
Genuine Whirlpool part
By: Whirlpool
Part Number: WP210690

 

This part fixes the following symptoms
  • Leaking
See more...
Do-It-Yourself Stories from Customers like You Sticking/seizing agitator output shaft leading to belt failure leaving washer inoperable   Jason L. • Lees Summit , MO • September 24, 2014

Perfectly! Replacing Agitator Shaft is not for the faint of heart. Replacing output shaft pinion gear on the bottom of the agitator shaft requires care, experience and patience with pressing/driving drift pins without damaging the gear itself. One slip of the drift/punch or press apparatus will ruin the gear/teeth face and will lead to failure of the transmission internally when put back into service. As best as I can tell the pinion gear is discontinued and no longer available so take care!... Read more

More
Washer-Cla
Genuine Whirlpool part
By: Whirlpool
Part Number: WP211210

 

Do-It-Yourself Stories from Customers like You Leak from drums on maytag washer   Chuck A. • Sharpsville , PA • July 01, 2018

Using your video then calling Tina, who researched a part I had that wasn't in video or parts list. She had me send in a picture and researched then called me back. The part was redesigned. She was very helpful. Read more

More
Washer Bleach Dispenser Inlet
Genuine Whirlpool part
By: Whirlpool
Part Number: WP215577

This inlet fitting allows bleach to enter the washer's dispenser system and connects to the main water supply line. Replace when bleach doesn't dispense properly, leaks occur around the inlet, or the fitting becomes clogged or damaged.

Do-It-Yourself Stories from Customers like You Bleach dispenser disintegrated after 25 years of service in maytag top loader   George S. • Clermont , FL • March 04, 2016

Amazed that the part was still made. The old part just fell apart. Be sure to keep the gasket Vynl is still good. YOu have to force the part in along the gasket Read more

More
Filter Plug
Genuine Whirlpool part
By: Whirlpool
Part Number: WP215980

 

More
Washer Unbalance Plunger
Genuine Whirlpool part
By: Whirlpool
Part Number: WP216255

Washer shaking or stopping mid-spin? This unbalance plunger detects off-center loads to maintain proper spin speed. Direct replacement part.

More
Suspension Spring
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22001300

 

Do-It-Yourself Stories from Customers like You Vibration and clunking noises during spin cycle   Frank F. • Somers , CT • January 13, 2019

Before I took it apart I thought it had a broken tub tensioner spring. After some research, I thought it might be worn damper pads. Upon disassembly I found the springs and pads intact, pretty amazing for a 25 year old machine. All I did was re-lubricate the pads and put everything back together and give the spring adjusters a half a turn more tension. Test ran two loads and it ran perfect. As a side note, the springs that came and were supposed to be for my machine were too short, smaller... Read more

More
Washer Timer Dial Skirt
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22001660

This decorative ring surrounds the timer dial and provides a finished appearance to the washer control panel. Located around the timer knob on the front panel, it should be replaced when cracked, discolored, or no longer fits securely in place.

More
Unbalance Lever
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22001681

 

More
Sound Dampening Pad
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22001817

 

More
Collar, Center Shaft
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22002353

 

More
Timer Motor
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22205033

 

This part fixes the following symptoms
  • Timer will not advance
See more...
Do-It-Yourself Stories from Customers like You Timer motor   James H. • Hendersonville , TN • November 13, 2017

Replaced the timer motor and works perfectly. Read more

More
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3934714

 

Do-It-Yourself Stories from Customers like You Lip seal was leaking oil which is at the part of the transmission housing shaft.   Gary B. • Hamilton , OH • April 07, 2017

I emailed appliancepartspros.com with what my problem was and they informed me what was wrong they gave me a part number to order, tools needed and a brief explanation how replace the seal. they also have online video's for different repairs. I watched the video for lip seal(part # 207843) replacement.I also had to remove the brake assembly in order to replace the seal so I watched that video also. I went online and got the part numbers for items I needed to make my repairs.Just follow the... Read more

More
Yoke
Genuine Whirlpool part
By: Whirlpool
Part Number: WP6-2066850

 

Do-It-Yourself Stories from Customers like You My 20 year old maytag washer was knocking durring the wash cycle   Dennis K. • Antioch , CA • November 15, 2015

I took the cover off the transmission and determined that the only possible knocking had to be coming from the yoke. I ordered a new yoke and all the tub seals needed to put it back together like new. I also ordered a new drive pulley bearing because this bearing is always turning whenever the washer is used. I cleaned all the parts up while I was waiting for the new parts to arrive. I promised my wife I would make it look like new. I installed all the new parts in one day and let the... Read more

More
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google