Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Lbrc22544ww Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Washer Water Level Pressure Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3356467

Washer won't fill properly or overfills? This water level pressure switch senses fill levels and signals when to stop. Easy DIY fix for cycle timing issues.

Do-It-Yourself Stories from Customers like You Wash machine once in a while would stop running   Daniel B. • Leesburg , FL • May 13, 2016

I found that turning the water level switch back and forth would activate the machine So I replaced the water level switch and the plastic hose that connected to it. I purchased a clamp in the purchase, but it was the wrong size! There wasn't a clamp used in the original set up, so I installed the switch and hose without it! It was the video instructions and having the correct parts that made that made this a easy repair! Thank You Read more

More
$108.40

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Control Knob (Gray)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8538957

This gray control knob replaces a worn or broken knob on the console so you can accurately select settings. It fits onto the timer/selector shaft and restores a secure grip with smooth, positive engagement. What it does:

  • Attaches to the control/timer shaft on the front panel
  • Lets you turn and select cycles or options
  • Restores a snug fit when the original knob is cracked or stripped
  • Common symptoms: knob spins freely, falls off, won't turn settings, or is missing
What's included:
  • 1 gray control knob
Install notes:
  • Disconnect power before servicing
  • Pull the old knob straight off the shaft; retain any insert/clip used by your model
  • Align the new knob with the shaft and press firmly until fully seated
  • Test all settings for proper engagement

Do-It-Yourself Stories from Customers like You Bad water level switch& control knob.   Jimmy A G. • Port Lavaca , TX • March 13, 2017

Removed upper cowling swapped out switch. Read more

More
$48.46

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Washer Timer
Genuine Whirlpool part
By: Whirlpool
Part Number: 285952

Washer stuck between cycles or skipping rinse? This timer controls cycle sequence and duration. DIY repair typically takes 10-15 minutes with basic tools.

Do-It-Yourself Stories from Customers like You My washing machine was getting stuck between cycles   Robert G. • Flatwoods , KY • October 26, 2014

I knew the timer was bad. I went to the parts train website as i had done before. I found the part in just a few moments. It arrived in 2 days and I replaced the timer. 4 screws and 10 minutes was all that it took. Read more

More
$241.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Washer Brake Release Cam
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8546461

Fixes grinding noise or basket won't spin issues by disengaging the brake during spin cycles. Restores smooth operation when cam wears out or breaks.

Do-It-Yourself Stories from Customers like You No spin every thing else worked made high speed ticking noise   Anthony D. • Follansbee , WV • May 12, 2015

First I looked at the many you tube vids, and there are many. appliance parts pros pretty much shows you how to deal with the parts. I changed the brake shoes and the clutch assembly which also comes with the driver cam. I also changed the metal brake operating cam. I think that brake lockup or improper brake release was the problem that broke the plastic cam driver. This was the broken plastic part making all the ticking noise. I first changed the coupling on the motor but that wasn't bad. in... Read more

More
$5.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Washer Agitator Assembly With Lint Filter
Genuine Whirlpool part
By: Whirlpool
Part Number: 387838

Agitator broken or not turning clothes properly? This washer agitator assembly with built-in lint filter restores wash action. Easy DIY replacement.

Do-It-Yourself Stories from Customers like You Agitator broken   Carolyn P. • Mc Cormick , NC • November 25, 2014

Removed the old, and on with the new. Easiest repair I've ever done Read more

More
$116.50

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Washer Timer
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3948323

Fix a washer that won't advance cycles, stops at spin, or skips drain. This timer controls wash, rinse, drain, and spin sequence timing.

More
$222.52

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Cam Sleeve (Bushing), 1
Genuine Whirlpool part
By: Whirlpool
Part Number: WP63022

A cam sleeve that supports and guides the cam on its shaft to keep the cam-driven mechanism moving smoothly. Replacing a worn sleeve helps restore correct alignment and reduces binding or intermittent movement. What it does

  • Centers and stabilizes the cam on its shaft for reliable engagement.
  • Prevents metal-on-metal wear between the cam and shaft.
  • Helps eliminate binding, wobble, or uneven operation caused by a worn sleeve.
  • Common symptom of failure: noise, sticking, or irregular movement from the cam-driven mechanism.
What's included One cam sleeve. Install notes
  • Disconnect power to the appliance before beginning any repair.
  • Access typically requires removing the appropriate service panel; follow the model service manual.
  • Inspect mating cam and shaft for wear; replace any damaged components.
  • Reassemble panels and verify proper operation before returning the appliance to service.

Do-It-Yourself Stories from Customers like You The tub would not spin   Jose K. • Simi Valley , CA • November 22, 2018

The spin tube bearing and the cam sleeve needed to be replaced. Read more

More
$28.43

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Washer Thrust Bearing
Genuine Whirlpool part
By: Whirlpool
Part Number: 285205

Supports the washer transmission shaft to reduce axial wear and noise. Replace when you hear grinding sounds or experience rough operation. Confirm fit with your model number.

More
$5.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Washer Agitator Cap
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3352483

Replace your cracked or missing washer agitator cap to restore appearance and protect internal fasteners. White plastic cap snaps on easily in minutes.

Do-It-Yourself Stories from Customers like You Agitator cap broke   Crystal H. • Las Vegas , NV • April 29, 2017

Pulled off the old broken part, and replaced with the new one. It snapped off and on easily. Read more

More
$43.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
3-Position Temperature Switch (Selector)
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10168256

This 3-position temperature switch is the user control that selects between three temperature settings, restoring reliable temperature selection and consistent performance. It replaces a worn or failed selector to recover intended temperature control. What it does

  • Acts as the selector that routes the control signal to one of three temperature positions.
  • Commonly used when temperature settings fail to change or the unit stays at one setting.
  • Helps eliminate inconsistent temperatures or intermittent heating/cooling related to selector faults.
  • Switches between preset temperature ranges without changing other controls.
What's included
  • One 3-position temperature switch
Install notes
  • Disconnect power to the appliance before beginning any work.
  • Note or label wire locations and take a photo before removing the old switch for correct reassembly.
  • Handle connectors carefully; ensure secure, fully seated connections after installation.

Do-It-Yourself Stories from Customers like You Movers broke temperature control know when bringing washing machine into the new house   Karen S. • Canyon Lake , CA • January 05, 2015

Replacing the temperature switch and control know was easy! Took all of about 5 minutes. Read more

More
$68.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Washer Lid Hinge, Left
Genuine Whirlpool part
By: Whirlpool
Part Number: 8318088

This is a left-side lid hinge for a top-load washing machine. It connects the lid to the washer cabinet and allows it to open and close smoothly. Replace this hinge if the lid feels loose, does not stay open, sits unevenly, or if the hinge is cracked or broken.

Do-It-Yourself Stories from Customers like You Lid hinge was broken   David S. • Atascadero , CA • April 24, 2019

I removed the old broken hinge and replaced it with the proper new part. Two screws out, place hinge and screw it in place. Easy and quick. Read more

More
$22.47

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Range Door Handle
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2411F013-70

Replace your cracked, broken, or missing range door handle. This 30-inch handle installs on the oven door to restore secure grip and proper alignment.

More
$94.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Washer Timer Dial
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8544947

If your timer knob is cracked, broken, or pulls off when starting cycles, this washer timer dial restores full control. Simple snap-on replacement.

More
$48.46

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Washer Shaft Sleeve Bushing
Genuine Whirlpool part
By: Whirlpool
Part Number: 285658

Replacement shaft sleeve bushing for washers. Fits over rotating shafts to reduce friction and protect surfaces. Replace when worn, cracked, or missing.

More
$7.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Washer Retaining Clip
Genuine Whirlpool part
By: Whirlpool
Part Number: 8541668

Secures panels and components in your washer to prevent rattles and maintain alignment. Replace when broken or missing to restore proper fit.

More
$14.56

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Washer Motor Shield
Genuine Whirlpool part
By: Whirlpool
Part Number: W10838408

Rusted or missing motor shield letting debris reach your washer motor? This protective cover blocks foreign objects and secures the motor assembly. DIY repair.

Do-It-Yourself Stories from Customers like You Rusted motor shield that had rotted away   James N. • Gastonia , NC • February 16, 2015

The repair was simple. Having used Appliance Parts Pro in the past for much needed repair parts, I simply unplugged the machine, turned off the water and removed the drain hose and slid unit forward. I then removed the top control panel like last time, tilted the body forward and set it aside. I unfastened the upper hose to the water pump and slid what was left of the old shield out and slid the new replacement shield back into place then reattached the flex hose. The shield slipped right... Read more

More
$23.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google