Ldf353285 Parts

This is a safety switch assembly that helps ensure the dishwasher operates only under safe conditions, such as when the door is properly latched or water pressure is adequate. It sends a signal to the control board to allow or interrupt the wash cycle. Replace this switch if the dishwasher will not start, stops mid-cycle unexpectedly, or fails to fill with water properly.

Check valve that prevents water backflow in the appliance's supply line, helping restore proper water flow to the ice maker or dispenser. Replaces a failed valve to address leaking, slow fills, or no-fill conditions. What it does:

• Stops reverse flow in the water line so water only moves toward the dispenser or ice maker
• Helps prevent water leaks and cross-contamination of the supply line
• Common symptom fixes: intermittent or no water to ice maker/dispenser, weak fills, or water pooling
• Fits inline with existing water tubing and works with the appliance's fill system

• Shut off water supply and unplug the appliance before replacing the valve
• Confirm tubing size and orientation before installation; install with correct flow direction
• Tighten fittings to prevent leaks but avoid overtightening plastic fittings

This PCB assembly is the appliance's main control board that manages cycle commands, sensor signals and user inputs to keep the appliance operating correctly. Replacing a faulty board restores control and communication functions. What it does:

• Receives inputs from the control panel and sends commands to motors, valves and heaters
• Monitors sensor signals and timing functions to coordinate cycles
• Stops operation or causes errors if the board fails or loses power
• Common symptom link: unresponsive controls, error codes, or appliance that won't start

• One PCB assembly (control board)

• Disconnect power before starting and verify power is removed to avoid shock
• Handle the board carefully and avoid touching components or connectors; observe electrostatic discharge (ESD) precautions
• Inspect connectors and wiring for damage and ensure secure connections during reassembly

This dishwasher tine row is a replaceable rack component that holds dishes in place during the wash cycle. It features plastic prongs that secure plates, bowls, and cookware to prevent them from moving around or flipping over. Replace this part when tines are broken, cracked, or missing, causing dishes to fall through or not get properly cleaned.

Creates a watertight seal to prevent leaks in your dishwasher. Replace when worn or cracked to stop water damage. Confirm fit with your model number.

Replacement wire rack for your dishwasher. Provides secure support for dishes and cookware. Install when original rack is cracked, bent, or missing.

Replace broken or missing tines in your dishwasher's dish rack. This prong holds and spaces dishes securely during wash cycles. Ideal for cracked tines.

This name plate is the exterior emblem that mounts to the appliance's front panel. It replaces a missing, cracked, or faded badge to restore a clean, factory look and cover the designated trim area.

• Attaches to the outer panel to display brand/series identification
• Restores a finished appearance where the original emblem sits
• Direct replacement for a lost, damaged, or worn badge
• Typical symptoms: missing emblem, loose or broken tabs, peeling, or discoloration

• Disconnect power before servicing the appliance
• Carefully remove the old emblem; release any tabs from behind or peel away remaining adhesive
• Clean and dry the mounting surface; remove all residue for best fit
• Align with the recess/holes and press evenly until fully seated

Replacement dishwasher rack restores storage space when your original is cracked, bent, or broken. Supports dishes and cookware securely for proper organization.

This locker lock is the replacement latch mechanism that secures the appliance door during operation, restoring proper door closure and helping the unit run safely and reliably. Use when a door won't stay closed or the machine won't start. What it does:

• Replaces a worn or broken door latch to restore secure door closure
• Helps ensure the appliance detects a closed door and can start cycles
• Commonly used when the door is loose, won't latch, or causes door-sensor errors
• Fits into the door strike area and engages the cabinet catch for a firm hold

• Locker lock (single replacement latch)

• Disconnect power and water supply before servicing to avoid shock or injury
• Remove the outer door panel or access cover as needed to reach the latch area
• Verify alignment of the latch and striker when reinstalling to ensure proper engagement

This is a water inlet guide assembly that directs incoming water into the dishwasher tub during the fill cycle. It channels water from the inlet valve to the proper location inside the wash chamber for effective cleaning. Replace this part if you notice water leaking around the inlet area, poor fill performance, or visible cracks and damage to the guide.

Holds utensils and small items upright in your dishwasher's lower rack. Replace if the basket is cracked, broken, or missing prongs that no longer secure items.

Replacement dishwasher holder secures internal components in proper position. Needed when original is cracked, broken, or missing causing rattling.

A small snap-on trim cap used to cover and protect exposed fasteners or openings, restoring the appliance's finished appearance and helping keep debris out of the cavity. What it does

• Covers and conceals exposed screw heads or shaft ends for a clean look
• Helps prevent dust and lint from entering small openings
• Restores damaged or missing finish trim on the appliance
• Fits as a simple cosmetic/protective replacement — commonly used where a snap-fit cap is required

What's included

• One cap cover

Install notes

• Snap into place over the exposed fastener or opening; no special tools usually required
• Disconnect power or follow appliance safety procedures if working near electrical components
• Replace only with the matching part number to ensure proper fit

Door won't stay open or slams shut? This dishwasher door hinge spring provides counterbalancing tension for smooth opening and closing operation.

Small mounting bracket that secures internal dishwasher components in place. Replace if cracked, broken, or missing to stop rattling and maintain alignment.