Ldp679 Parts

This is the complete lower dish rack assembly that slides in and out of the bottom of the dishwasher on rollers. It holds plates, pots, pans, and larger items during the wash cycle. Replace this rack assembly if the tines are broken or rusted through, the rack no longer rolls smoothly, or if the coating has worn away causing rust to transfer onto your dishes.

This is a replacement mounting screw designed for securing appliance panels and components where the original fastener is customized for fit. It restores proper attachment and helps reduce rattling or loose parts. What it does:

• Secures panels, brackets or components to maintain proper alignment and operation
• Replaces missing or stripped fasteners that can cause vibration or noise
• Matches the appliance's customized fastener locations for correct fit
• Helps prevent further wear or damage from loose parts when properly installed

• Disconnect power and unplug the appliance before starting any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Replace like-for-like; use the same screw type and length for secure fastening
• Inspect and repair damaged mounting holes or threads before reinstalling

Door hinge for dishwashers. Connects door to main frame for smooth opening and closing. Replace if hinge is cracked, bent, or loose causing door misalignment.

Replace a cracked or broken dishwasher door hinge. This connector piece allows the door to swing open and closed smoothly during loading and unloading.

This supporter hinge secures and supports a refrigerator/freezer door at the hinge point to keep the door aligned and operating smoothly. Replaces a worn or broken hinge to reduce sagging and uneven door closure. What it does:

• Provides structural support where the door meets the cabinet to maintain proper door alignment
• Helps the door open and close smoothly by stabilizing the hinge assembly
• Commonly used when door sags, binds, or does not seal properly
• Works with the cabinet hinge assembly to prevent excess wear on door seals and gaskets

• 1 supporter hinge

• Unplug the appliance or disconnect power before starting any repair
• Support the door while removing/installing the hinge to prevent dropping or damage
• Retain and reuse any original screws if undamaged, or replace with OEM-specified fasteners

This supporter hinge is a replacement hinge support bracket that helps secure and align the appliance door so it opens and closes smoothly. It restores proper hinge positioning to reduce door sag and uneven sealing. What it does:

• Secures the door hinge assembly and provides a stable mounting point
• Helps maintain door alignment to improve sealing and reduce gaps
• Reduces door sag and uneven wear on hinge components
• Restores smooth door movement and consistent closing

• One supporter hinge / hinge support bracket

• Disconnect power to the appliance before starting any repair
• Remove the door per the service manual instructions to access the hinge support
• Use appropriate hand tools and keep fasteners organized for reassembly
• Do not overtighten mounting screws; adjust hinge alignment as needed after installation

This is a row of adjustable tines that attaches to the lower dish rack in the dishwasher, providing upright support for plates, bowls, and cookware. The tines can typically be folded down to accommodate larger items. Replace this part if the tines are bent, broken, or have lost their vinyl coating, which can cause rust spots on dishes.

Fix a dishwasher that won't start, stops mid-cycle, or has no power. This main control board manages all wash functions. Moderate DIY repair.

This drain pump assembly removes used water from the dishwasher tub during the drain cycle, pushing it out through the drain hose. It includes the pump motor and housing. Replace this assembly if the dishwasher is not draining, water remains pooled at the bottom after a cycle, or you hear unusual humming or grinding noises during the drain phase.

This is a left-side slide rail assembly that supports and guides the dish rack as it rolls in and out of the dishwasher. It mounts inside the dishwasher tub and allows smooth, even movement of the rack during loading and unloading. Replace this part if the dish rack is difficult to slide, sits unevenly, or falls off its track.

This outer door frame restores the appliance's front trim for proper fit and finished appearance. It replaces damaged or worn trim to help the door close evenly and maintain a clean look. What it does

• Replaces the outer door frame trim to restore correct alignment and sealing.
• Secures the door assembly and helps prevent gaps that can cause drafts or heat loss.
• Eliminates cosmetic damage like cracks, dents, or warped trim for improved appearance.
• Can reduce rattling or noisy operation caused by a loose or broken frame.

• Disconnect power to the appliance before starting any repair.
• Remove the door or access panels per the service manual to reach mounting screws—keep track of fasteners.
• Handle trim and any attached glass carefully to avoid breakage or injury.

The Dishwasher Door Cable Connector Assembly is an OEM replacement part for LG dishwasher. The cable connector assembly works with the door cable to properly guide and support the door as it moves through the full range of opening and closing motions. 

Causes of a bad door cable connector can include wear and tear over time resulting in cracks, loose connections, or broken or damaged connectors that no longer securely attach the cable. 

Symptoms of a bad door cable connector include:

• The door not properly aligning when closed 
• Difficulty opening or closing the door smoothly
• Noisy operation or rattling sounds from the door area
• The door not latching securely in place

This OEM LG part is also compatible with select Sears/Kenmore brand models.

This door latch holder secures the microwave oven's door lock assembly so the door closes and latches reliably. Replacing a worn or broken holder restores proper door engagement and helps the unit start and operate safely. What it does:

• Secures the door lock/latch assembly to the oven frame so the door closes and stays latched
• Commonly replaced when the door feels loose, won't stay closed, or the oven doesn't start
• Works with the lock components to maintain proper door alignment and switch activation
• Helps prevent intermittent operation caused by a misaligned or damaged latch mount

• Basic hand tools required; access typically through the front control/door area—refer to model service instructions
• Power off and unplug the appliance before attempting any repair; disconnect power at the breaker if hardwired
• Handle door and latch components gently to avoid harming the door glass, switches, or wiring

Restore the second-level cooking surface inside your microwave. This interior cooking rack sits on the factory support hooks to elevate dishes for certain cycles, replacing a lost, bent, or chipped rack so cookware stays level and heats properly. What it does:

• Creates a second cooking level when your model calls for it
• Elevates dishes above the turntable for multi-item reheating or convection/grill use
• Replaces a rack that is missing, bent/wobbly, or has damaged coating that may cause arcing
• Seats in designated support positions to maintain proper clearances

• 1 cooking rack

• Disconnect power before cleaning or servicing; handle carefully to avoid chipping the coating
• Position only on the designated support hooks; ensure it is level and not touching cavity walls
• Use strictly as directed in your model's owner's manual
• Discontinue use and replace if arcing occurs or the rack is damaged

This is a thermistor assembly that monitors the water temperature inside the dishwasher during wash and rinse cycles. It sends temperature readings to the control board so the machine can heat water to the correct level. Replace this sensor if dishes come out poorly cleaned, the cycle runs too long, or the dishwasher displays a temperature-related error code.