Ldt7797bm Parts

This door latch holder secures the microwave oven's door lock assembly so the door closes and latches reliably. Replacing a worn or broken holder restores proper door engagement and helps the unit start and operate safely. What it does:

• Secures the door lock/latch assembly to the oven frame so the door closes and stays latched
• Commonly replaced when the door feels loose, won't stay closed, or the oven doesn't start
• Works with the lock components to maintain proper door alignment and switch activation
• Helps prevent intermittent operation caused by a misaligned or damaged latch mount

• Basic hand tools required; access typically through the front control/door area—refer to model service instructions
• Power off and unplug the appliance before attempting any repair; disconnect power at the breaker if hardwired
• Handle door and latch components gently to avoid harming the door glass, switches, or wiring

The Dishwasher Door Cable Connector Assembly is an OEM replacement part for LG dishwasher. The cable connector assembly works with the door cable to properly guide and support the door as it moves through the full range of opening and closing motions. 

Causes of a bad door cable connector can include wear and tear over time resulting in cracks, loose connections, or broken or damaged connectors that no longer securely attach the cable. 

Symptoms of a bad door cable connector include:

• The door not properly aligning when closed 
• Difficulty opening or closing the door smoothly
• Noisy operation or rattling sounds from the door area
• The door not latching securely in place

This OEM LG part is also compatible with select Sears/Kenmore brand models.

This outer door frame restores the appliance's front trim for proper fit and finished appearance. It replaces damaged or worn trim to help the door close evenly and maintain a clean look. What it does

• Replaces the outer door frame trim to restore correct alignment and sealing.
• Secures the door assembly and helps prevent gaps that can cause drafts or heat loss.
• Eliminates cosmetic damage like cracks, dents, or warped trim for improved appearance.
• Can reduce rattling or noisy operation caused by a loose or broken frame.

• Disconnect power to the appliance before starting any repair.
• Remove the door or access panels per the service manual to reach mounting screws—keep track of fasteners.
• Handle trim and any attached glass carefully to avoid breakage or injury.

Restore the second-level cooking surface inside your microwave. This interior cooking rack sits on the factory support hooks to elevate dishes for certain cycles, replacing a lost, bent, or chipped rack so cookware stays level and heats properly. What it does:

• Creates a second cooking level when your model calls for it
• Elevates dishes above the turntable for multi-item reheating or convection/grill use
• Replaces a rack that is missing, bent/wobbly, or has damaged coating that may cause arcing
• Seats in designated support positions to maintain proper clearances

• 1 cooking rack

• Disconnect power before cleaning or servicing; handle carefully to avoid chipping the coating
• Position only on the designated support hooks; ensure it is level and not touching cavity walls
• Use strictly as directed in your model's owner's manual
• Discontinue use and replace if arcing occurs or the rack is damaged

The Display Panel is an OEM part for LG dishwashers. This display panel is responsible for conveying important information about the wash cycle as well as enabling cycle and option selection. 

Causes of a bad display panel can include damage to the screen or buttons from accidental impact or liquid, failure of electronic components responsible for powering and communicating with the control board, or general wear and tear over time.

Symptoms of a bad display panel include:

• Buttons and/or screen not functioning properly
• Inability to select wash cycles or options
• Flickering, fading, or unresponsive display
• Electrical shortages or random operational issues

This LG part is also compatible with some Kenmore models.

The Rail Assembly is an OEM part for LG dishwashers. This rail assembly supports the upper dish rack and guides it smoothly in and out of the dishwasher.

Causes of a bad rail assembly include wear from repeated rack extension and retraction over many cycles, damage due to overloading racks, or impact that has bent rail components out of proper alignment.

Symptoms of a bad rail assembly include:

• Upper rack not smoothly rolling in and out of the dishwasher
• Binding, catching, or loud noises when operating the upper rack
• Rack unable to fully extend or retract as designed
• Rack unable to stay securely locked in closed position

This LG part is also compatible with some Kenmore models.
 

The Rack Assembly is an OEM part for LG dishwashers. It is responsible for providing adjustable shelf space in the upper section of the dishwasher, allowing for versatile loading of dishes, glasses, and other washable items.

Causes of a bad upper rack assembly can include damage or wear to the adjustable components over time, cracks or breaks in the plastic structure, or issues with proper mounting or installation that cause stability problems.

Symptoms of a bad upper rack assembly include:

• Dishes not being properly washed in the upper rack section
• Items falling through or between the prongs/rails during the cycle
• The rack sliding or collapsing inward during washing

This OEM LG part is also compatible with some Kenmore models.

Fix dishwasher electrical issues with this wire harness connector assembly. Restores secure electrical connections between internal components.

The Cover Assembly is an OEM component specifically designed for LG dishwashers. This assembly consists of the outer tub cover and inner mounted components that protect internal mechanisms.

Causes of a bad cover assembly can include cracks, dents, or other physical damage from regular loading and unloading of dishes. Harsh or abrasive cleaners can degrade protective surfaces over time as well. 

Symptoms of a bad cover assembly include:

• Water leaks inside or outside the dishwasher 
• Loose, unstable, or damaged outer tub cover
• Detached or broken mounting clips for inner components

This OEM LG part is also compatible with Sears/Kenmore dishwashers. Replacing the entire cover assembly restores integrity to protect sensitive inside parts. Proper maintenance extends the lifespan of exterior components.
 

This upper dishwasher rack replaces a worn or damaged rack to restore safe, stable support for dishes and glassware during wash cycles. It provides proper spacing and alignment so items clean evenly and stay protected. What it does

• Holds plates, cups and lightweight dishware in the dishwasher's upper loading area
• Restores missing or broken tines and support that can cause items to shift or tip
• Helps maintain correct spray coverage for consistent cleaning results
• Reduces risk of chipping or scratching by keeping items separated

• One upper dishwasher rack

• Designed for drop-in replacement; remove lower rack and slide out upper rack guides as needed
• Inspect and replace any damaged rollers or rail clips at the same time for smooth operation
• Disconnect power and follow manufacturer guidelines when accessing internal components

This roller assembly supports and helps the dryer drum turn smoothly, reducing noise and wear. Replace a worn roller to restore stable drum rotation and quieter operation. What it does:

• Supports the dryer drum so it spins evenly during drying cycles
• Reduces scraping, grinding or thumping noises caused by worn rollers
• Helps prevent excessive drum wobble that can stress the motor and belt
• Restores proper drum alignment to improve overall operation

• Disconnect power before starting any repair to avoid shock or injury
• Access usually requires removing the dryer cabinet or front panel — follow your model's service guide
• Inspect the belt and adjacent rollers for wear and replace if needed

This case assembly is the outer housing that holds and protects the appliance's control components and switches, restoring a finished appearance and keeping electronics secure. It's a direct-replacement style part for visible control areas. What it does:

• Provides a protective enclosure for control boards, switches and user interface components
• Restores a secure, stable mounting point for buttons, levers and display elements
• Helps prevent dust, moisture and debris from reaching internal electronics
• Can resolve loose or damaged control bezel issues and improve appliance appearance

• Handle carefully to avoid scratching the visible surfaces and damaging tabs or mounting points
• Power off and unplug the appliance before starting work to reduce risk of shock
• Retain and reuse any clips, screws or gaskets from the original part unless replacements are supplied

This factory parts assembly replaces a damaged or failed component assembly to restore proper operation and control. It's a direct-fit replacement made to the original manufacturer's specification for reliable performance. What it does:

• Replaces the failed assembly that can cause power, control, or function failures
• Restores responsive controls and normal operation when the original assembly is malfunctioning
• Addresses symptoms such as intermittent power, unresponsive controls, or errors tied to the assembly
• Works as a direct OEM-fit replacement when installed correctly

• One parts assembly

• Disconnect power and water before starting any repair
• Use appropriate tools and avoid forcing connectors or fasteners
• Retain and reuse mounting hardware only if undamaged; replace damaged fasteners

This wire rack assembly replaces a damaged or worn shelf to support items inside the appliance and restore organized storage and stable loading. Durable coated wire construction resists bending and helps keep items secure during use. What it does:

• Provides a stable support surface for dishes, cookware, or stored items
• Replaces bent, rusted, or broken rack sections that cause items to tip or slide
• Restores proper alignment so drawers or racks glide smoothly
• Helps prevent contact damage by keeping items off interior surfaces

• One rack assembly

• Disconnect power and, if applicable, turn off the water supply before beginning
• Remove existing rack or trim pieces per the appliance's service instructions
• Handle edges carefully; coated wire can have sharp ends where broken
• If the rack uses rollers or clips, inspect and replace any worn hardware for best fit

This blower cover is the outer housing piece that directs airflow from the blower assembly and protects the fan motor and internal components. It helps maintain proper airflow path and reduces contact with moving parts. What it does:

• Directs and channels airflow from the blower to the unit's vents for efficient circulation
• Protects the blower wheel and motor from debris and accidental contact
• Helps reduce rattling and vibration when the cover is intact and properly seated
• May cause decreased airflow or unusual noise if cracked, warped, or missing

• Disconnect power to the appliance before performing any service
• Typically installed with a few screws or clips after removing the front grill or access panel
• Handle plastic tabs gently to avoid breakage; align clips before tightening fasteners

This lower frame is the factory replacement trim piece that mounts to the base of the appliance door/cabinet, restoring proper fit and finished appearance. It helps protect the lower edge and keeps the door aligned. What it does:

• Replaces a damaged, cracked or bent lower cabinet/door frame to restore proper sealing and appearance.
• Supports the bottom edge of the door or cabinet opening to help maintain alignment and smooth operation.
• Prevents debris and moisture from collecting under the door trim.
• Helps eliminate rattling or loose trim caused by broken or worn lower frame pieces.

• One lower frame

• Basic removal of the door or front panel may be required; retain screws and fasteners for reassembly.
• Handle panels and sharp edges with care; wear gloves to protect hands.
• Disconnect power (and water if applicable) to the appliance before beginning any disassembly.