Lfx25973st Parts

The Roller Assembly is an OEM part for LG refrigerators. It comprises the set of rollers that suspends and aids the smooth gliding of refrigerator shelves. The rollers are designed with precision bearings to withstand the weight of shelf loads and years of use while providing quiet and frictionless movement. 

Causes of a bad roller assembly include worn-out or damaged rollers due to heavy usage over time, or shelf loads that are too excessive. 

Symptoms of a bad roller assembly are:

• Shelves that do not easily slide in and out 
• Grinding or squeaking noises emanating from the shelf tracks
• Shelves that get stuck or do not smoothly glide

This OEM LG part is also compatible with Sears/Kenmore. Replace yours today and restore like-new shelf functionality to your refrigerator.
 

Left side

The Ice Maker Assembly is an OEM replacement part for LG refrigerators. It contains the complete ice-maker.

Causes of a bad Ice Maker Assembly can include issues with proper ice ejection, ice cube size or shape inconsistencies, decreased ice production over time, mineral or sediment buildup affecting performance, or wear and tear from extended use.  

Symptoms include:

• Incomplete or inconsistent ice filling of the ice tray 
• Cracked, pitted, or misshapen ice cubes
• Ice cubes not ejecting from the tray properly
• Slowed or ceased ice production

This OEM LG ice maker assembly is also compatible with some Kenmore refrigerator models. 

This ice dispenser door assembly opens to release ice and seals the chute when not in use. Replacing a worn flap restores a tight seal to reduce frost buildup and air leaks at the dispenser.

• Seals the ice chute to keep warm air out and cold air in
• Opens during dispensing to allow cubed or crushed ice to pass
• Helps prevent frost/ice accumulation in the chute and around the dispenser
• Common signs of failure: flap won't open/close, visible gap or draft at the chute, frost forming in the dispenser area

• Always disconnect power before servicing the dispenser
• Remove dispenser trim/control panel as directed; disconnect wiring as needed
• Remove mounting screws/clips, swap the assembly in the same orientation, and reuse existing hardware if applicable
• Restore power and test for smooth operation and a proper seal

This lever cover is a molded trim/protective piece that fits over a user-operated lever on the appliance. Replacing a damaged or missing cover helps protect the mechanism and restores a clean, finished appearance. What it does:

• Shields and guides the lever mechanism to help ensure smooth operation
• Helps keep internal components covered and aligned
• Restores the finished look when the original cover is cracked or missing
• Common symptoms: cracked or broken cover, loose/wobbly lever feel, sticking or misaligned lever action

• Includes 1 lever cover

• Disconnect power before servicing; if working near a dispenser, shut off water supply as applicable
• Remove any screws or clips and release locking tabs carefully to avoid breaking adjacent plastics
• Transfer any reusable hardware from the original part
• Check lever movement and engagement before final reassembly

Restore smooth, stable sliding with this rail guide assembly. It supports and aligns the sliding mechanism so your pull-out drawer, bin, or rack opens and closes evenly and seats properly.

• Guides the slide so the drawer/bin/rack moves in and out smoothly
• Helps keep the moving component level and aligned for proper closing
• Replacing a damaged guide can resolve sticking, binding, uneven travel, or scraping/grinding noises
• Can help when the drawer/rack won't extend fully or won't stay closed/seat correctly

• Disconnect power and remove the drawer/bin/rack and its contents for access
• Note orientation and transfer any mounting hardware from the original guide
• Install the new guide in the same position and tighten fasteners securely
• Manually slide to verify smooth travel before reloading

Refrigerator shelf assembly that replaces a damaged or missing internal shelf, restoring flat, secure storage for food and containers. Helps keep items level and organized inside the fridge. What it does

• Replaces a broken, cracked, or missing refrigerator shelf to restore usable storage space.
• Provides a flat, stable surface for jars, bowls, and containers so items won't tip or slide.
• Prevents food from sagging between compartments and improves organization and accessibility.
• Matches factory-fit shelf mounts and seating points for correct alignment when installed.

• Remove all items from the shelf area before installing; handle glass or trim with care and wear protective gloves if needed.
• Slide or seat the shelf into the factory supports or track until it clicks or sits flat; some models require lifting slightly to engage rear tabs.
• No electrical disconnect is typically required, but follow the refrigerator owner's manual and disconnect power if instructed for your model.
• If the shelf has clips or trim pieces, verify they are properly engaged and undamaged before use.

A replacement lever-style push button for the appliance control panel that restores reliable button operation and a finished appearance when the original button is cracked, worn or missing. Ideal for restoring a responsive console and clean look. What it does:

• Acts as the user-facing lever that presses the underlying switch or membrane to select cycles, options, or settings.
• Commonly used to repair symptoms such as cracked, loose, stuck, or unresponsive buttons on the control console.
• Matches the original form to help restore proper tactile feedback and consistent button travel.
• Provides a simple, low-cost way to make the control panel usable again without replacing the entire console.

• Always disconnect power (unplug or switch off circuit breaker) before servicing electrical appliances.
• Replacement typically requires removing the control bezel or overlay; handle plastic clips gently to avoid breakage.
• If the underlying switch or membrane is damaged or still unresponsive after installing the button, further diagnosis or a different replacement part may be required.

A replacement rear cover assembly that restores the TV's outer housing and protects internal electronics from dust and damage. Replaces cracked or warped back panels to return the set to a secure, finished condition. What it does:

• Replaces a damaged or cracked rear housing panel so internal parts are covered and protected.
• Secures mounting points and internal boards to reduce rattles and improve structural fit.
• Covers ports and vents to help prevent dust buildup and foreign-object contact.
• Restores the TV's exterior finish where the original back panel is warped, broken, or missing.

• Unplug the TV and place it on a soft, flat surface before beginning work.
• Keep and match all screws and fasteners; many panels use small clips that can break if handled roughly.
• Remove and install panels slowly to avoid damaging mounting tabs or internal cables.

This filter assembly head secures the refrigerator water filter and routes filtered water to the dispenser and icemaker. It restores proper filter seating and helps stop leaks or loss of water flow when the head is damaged or worn. What it does:

• Holds and seals the water filter cartridge so water passes through the filter element before dispensing
• Directs filtered water to the dispenser and icemaker plumbing
• Replaces cracked or warped housing that can cause leaks or poor filter seating
• Helps resolve intermittent water flow, leaks, or a filter that won't stay locked in place

• One filter assembly head as shown

• Turn off the refrigerator water supply and run the dispenser until flow stops to relieve pressure before removing the old head
• Inspect and lubricate O-rings with a food-safe silicone grease if reusing, or replace O-rings if damaged
• Hand-tighten the filter per manufacturer guidance; check all fittings for leaks after restoring water

A PTC thermistor assembly that senses temperature and provides the control board with accurate temperature feedback to help regulate heating and cycling. Replacing a faulty thermistor restores reliable temperature monitoring for safe, consistent operation. What it does:

• Monitors temperature and sends a signal to the appliance control so heating and cycles can be adjusted.
• Helps prevent overheating by enabling proper control of the heating system.
• Common symptoms of a failing thermistor: incorrect or inconsistent temperatures, heating that won't start or won't stop, extended cycle times, or temperature-related error codes.
• Works as the OEM-designated temperature sensing/feedback component for compatible LG units.

• Disconnect power to the appliance before starting any repair.
• Handle the assembly carefully; avoid pulling on wires or connectors—replace in the same orientation.
• May require basic hand tools and access panels.

The Door Basket is an OEM part for LG refrigerators. It is designed to provide convenient storage space directly on the refrigerator door. This basket offers an accessible solution for smaller items like condiments, eggs, or other perishables.

Causes of a bad door basket include normal wear and tear, as well as accidental impact or damage.

Symptoms of a bad door basket include:

• The basket no longer securely attaching to the refrigerator door
• Sections of the basket cracking or breaking off over time
• Loosening or inability to stay firmly in place on the door

This OEM LG part is also compatible with some Kenmore models.

This dispenser door link connects the dispenser actuator to the refrigerator dispenser door so the door opens and closes smoothly when dispensing. Replaces a worn or broken link to restore proper dispenser door movement. What it does:

• Transfers motion from the dispenser actuator to the dispenser door so the door opens when dispensing
• Keeps the dispenser door aligned for proper sealing and closure
• Can fail if the door won't open, sticks, or the dispenser lever feels loose or disconnected
• Compatible with dispenser assemblies that use a separate plastic/metal link between actuator and door

• Disconnect power to the appliance before starting any work
• Access may require removing the dispenser trim or front housing—keep fasteners organized
• Handle plastic components carefully to avoid cracking; inspect surrounding parts for wear

This Tray Cover Assembly replaces a worn or damaged cover on the appliance tray to help keep contents contained and ensure proper operation of the tray area. It's a direct-fit replacement designed for easy swap-out with the original part. What it does:

• Replaces a cracked, warped, or missing tray cover that can interfere with normal tray use
• Restores a secure, flush cover surface to prevent items from shifting or spilling
• Helps maintain correct alignment and function of the tray where the cover is used
• Reduces the chance of debris getting into the tray cavity and affecting operation

• Refer to OEM instructions for model-specific removal and installation steps
• Disconnect power and, if applicable, water before beginning any repair to avoid shock or unintended operation
• Use basic hand tools; handle plastic parts gently to avoid cracking during installation

This evaporator assembly circulates refrigerant and absorbs heat inside the freezer compartment to keep the refrigerator cool. Replacing a faulty evaporator restores proper cooling and helps prevent frost buildup and temperature issues. What it does:

• Contains the evaporator coil and housing that remove heat from the freezer air
• Enables the refrigeration cycle so the appliance reaches and holds set temperatures
• Affects frost control—worn or damaged units can lead to excessive ice buildup
• Commonly linked to symptoms like poor cooling, freezer frost, or frequent compressor runtime

• One evaporator assembly (coil and housing)

• Disconnect power to the appliance before beginning any service
• Remove interior panels and shelves to access the evaporator compartment
• Handle the assembly carefully; avoid bending fins or damaging connections

This cover assembly protects and secures the control connector area to prevent damage and ensure reliable electrical connections. It restores the original housing around the connector for safe operation and proper fit. What it does

• Covers and protects the appliance's connector area from dirt, moisture, and accidental contact
• Helps keep wiring and plug ends correctly positioned to maintain a stable electrical connection
• Reduces risk of connector damage that can cause intermittent power or control issues
• Appropriate when the original connector housing is cracked, broken, or missing

• One cover assembly for the connector housing

• Designed to snap or screw into place; follow the appliance wiring diagram and connector alignment
• Disconnect power to the appliance before attempting any repair to avoid shock or injury
• Inspect surrounding wiring and clips; replace damaged wiring or fasteners as needed