Lfxs269596d Parts

This cabinet roller supports the refrigerator and lets the unit roll in and out of place for cleaning or service. Replace a worn or broken roller to restore smooth movement and help keep the appliance properly positioned.

• Supports the base of the refrigerator and enables rolling movement
• Helps with safe positioning and service access without dragging
• Common failure signs: appliance is hard to move, scraping or rolling noises, a flat-spotted/cracked wheel, or a wheel that won't turn
• Replace when the roller is damaged, seized, or missing

• Disconnect power and shut off water supply; protect flooring before moving the appliance
• With help, pull the refrigerator forward and safely support it to access the roller
• Remove mounting fasteners, install the new roller, and reuse original hardware
• Confirm level and smooth movement before returning the unit to its location

This is the door handle mounting bracket assembly that secures the handle firmly to the door. It replaces a damaged or stripped bracket to restore a solid, wobble-free grip and reliable handle attachment.

• Mounts and secures the door handle to the door/frame
• Maintains alignment to prevent handle wobble or looseness
• Replaces cracked, broken, or stripped brackets to restore proper attachment
• Typical symptoms: loose or wobbly handle, handle pulls off, visible damage at the handle mount, rattling at the handle area

• Disconnect power before servicing and work carefully to avoid damaging the door surface
• Support the handle while loosening and tightening set screws or fasteners
• Retain and reuse original mounting hardware if it's in good condition
• Align the new bracket in the original location; do not overtighten fasteners

The Handle Assembly is an OEM part for LG refrigerator freezer compartments. It includes the handle and mechanical components that operate the freezer drawer.

Causes of a bad handle assembly can include fatigue from repeated opening and closing motions, damage sustained from heavy loads, or exposure to harsh chemicals over years of use.   

Symptoms of a bad handle assembly include:

• Handles detaching from the drawer front  
• Difficulty smoothly opening and closing the freezer drawer
• Inability to fully open or close the drawer
• Excessive play, wobble, or loose motion in the handle

Replace yours today with this genuine OEM LG assembly to restore effortless operation. This replacement handle is compatible with Frigidaire, Samsung, Whirlpool, and some Kenmore models.

This decor assembly is the outer trim that surrounds the appliance control panel, restoring the unit's finished appearance and protecting the controls from everyday wear. It replaces cracked, scratched or faded trim to make the front look like new. What it does

• Covers and protects the control area from spills, scratches and cosmetic damage
• Restores the appliance's factory appearance after impact or deterioration
• Helps keep buttons and touch controls clear of debris and grime
• Required to properly seat or secure the control components it surrounds

• One decor assembly (control-panel trim) as pictured

• Disconnect power (unplug or shut off breaker) before starting work
• Remove any retaining screws or clips from the control panel; handle trim gently to avoid breaking tabs
• Reuse existing fasteners unless new hardware is explicitly listed as included

This water inlet valve assembly regulates the flow of household water into your refrigerator. Replacing a sticking or leaking valve restores proper fill for ice production and dispensing and helps stop drips, low flow, and overfill issues.

• Opens and closes to control water flow from the supply line into the refrigerator's water system
• Directs water to the ice maker and dispenser as commanded by the control system
• Seals off when closed to prevent seepage or dispenser drip
• Common failure symptoms: no ice, no or slow dispenser water, leaking at the valve or connections, humming/buzzing from valve with no water flow

• Unplug the refrigerator and shut off the household water supply before servicing
• Pull the unit forward for access; relieve line pressure and place a towel or pan to catch residual water
• Note tubing and wire locations; move them one at a time to the new valve and avoid overtightening fittings
• Restore water and power, check all connections for leaks, and dispense water to purge air from the system

The Fan and Grille Assembly is an OEM component designed for LG refrigerators. This assembly circulates air within the refrigerator compartment to maintain even cooling temperatures. 

Causes of a bad fan and grille assembly can include failure of motorized fan components over time, buildup of dust or debris restricting airflow, or physical damage to fan blades.

Symptoms of a bad fan and grille assembly include:  

• Development of warm spots within the fridge
• Excessive frost or ice buildup inside 
• Louder than normal operating sounds
• Inability to maintain proper temperature settings

Replace yours today with this genuine OEM LG assembly to restore optimized air circulation for balanced cooling. This replacement assembly is compatible with Kenmore, Frigidaire, and GE refrigerator models. Proper airflow is essential for energy efficiency and food freshness.

Left side upper hinge.

This lever-style button is the molded actuator you press to trigger the underlying switch in the dispenser or control area. Replacing a worn or broken button restores positive engagement and dependable operation.

• Transfers your press to the underlying switch to activate the function
• Provides proper pivot/return action for a consistent feel
• Dispenser or control does not respond unless pressed firmly
• Lever/button sticks, binds, or fails to return
• Visible damage such as cracks or looseness

• Disconnect power before servicing; if working near water lines, also shut off the water supply
• Use a non-marring tool to release tabs and remove any trim or cover carefully
• Note spring/pivot orientation and transfer original hardware to the new button
• Check smooth operation before fully reassembling

The Dispenser Lever is an OEM part for LG refrigerators. It operates as the primary method of dispensing ice and water through the dispenser compartment. The lever is an ergonomic handle that allows for easy activation of the dispenser with a simple push or pull motion.

Causes of a bad dispenser lever include broken hinges or joints from excessive force or repeated use over time. The plastic levers can also crack or break due to impact.

Symptoms of a bad dispenser lever include:

• The lever being stuck in the up or down position
• Difficulty activating or using the lever to dispense
• Cracks or breaks in the plastic housing

This OEM LG part is also compatible with some Kenmore models.

This decor cover is a small trim piece that snaps over a mounting point to hide screws and finish the look of your appliance. Replacing a cracked or missing cover restores appearance and helps protect the underlying hardware. What it does:

• Conceals exposed fasteners/edges for a clean, finished appearance
• Helps shield underlying mounting points from dust and minor splashes
• Replaces a cracked, warped, discolored, loose, or missing trim cover/cap
• Common signs: exposed screws or gaps, loose adjacent trim/handle, rattling, or a cover that won't stay attached

• 1 decor cover

• Disconnect power to the appliance before starting
• Use a non-marring plastic pry tool to release the old cover to avoid scratching nearby surfaces
• Note the orientation and tab locations; align and snap the new cover into place with even pressure
• Verify a secure fit and reference your model's parts diagram for exact placement

STOPPER ASSEMBLY,DOOR

This tube assembly directs water through the appliance, restoring a secure, leak-resistant path when the original line is brittle, kinked, or damaged. Replacing it helps stop leaks and restores normal water flow.

• Routes water from the inlet valve to internal components
• Maintains sealed connections to reduce drips and seepage
• Replaces tubing that is cracked, kinked, or clogged with mineral deposits
• Common symptoms: visible leaks, puddling, low flow, or intermittent water delivery

• Disconnect power and shut off the water supply before servicing
• Place a towel to catch residual water and relieve line pressure
• Note the routing and connection points; transfer any retainers from the old part if needed
• Insert tubing fully into fittings and tug gently to confirm engagement; restore water and check for leaks

The PCB Assembly is an OEM part for LG refrigerators. It stands for Printed Circuit Board, which is the main control board that manages and regulates various functions and components within the refrigerator.

Symptoms of a bad PCB Assembly include:

• The refrigerator not powering on or displaying any lights/indicators
• Specific components or features not functioning correctly (ice maker, dispenser, cooling, etc.)
• Error codes or warning lights illuminated on the control panel
• Strange noises or abnormal behavior from the refrigerator

Causes of a bad PCB Assembly can be related to electrical faults, such as short circuits, power surges, or component failures. Physical damage from impact, moisture exposure, or overheating can also contribute to the malfunction of the PCB.

This OEM LG part is also compatible with Sears/Kenmore refrigerators. 

This refrigerator door handle assembly restores a solid, comfortable grip on the fresh food door. Replace a loose, cracked, or missing handle to improve door operation and refresh your refrigerator's appearance.

• Provides the handhold used to open and close the refrigerator door
• Attaches to existing door mounting studs and fasteners
• Common symptoms: handle broken, cracked, loose/wobbly, or missing; difficulty opening due to failed handle
• Built to match the original fit and look on applicable models

• Unplug the refrigerator and wear gloves to protect hands
• Loosen the set screws or fasteners securing the old handle; remove and retain any reusable hardware
• Position the new handle on the mounting studs; tighten fasteners evenly until snug—do not overtighten
• Reinstall any decorative caps if present

This sub PCB assembly is an electronic control board that processes inputs and switches components, coordinating specific appliance functions. Replacing a failed board can restore normal operation and resolve dead controls, error codes, or intermittent, unpredictable behavior. What it does:

• Distributes and regulates control power and switches loads via onboard relays/triacs
• Interprets signals from sensors and the user interface to execute commands
• Coordinates timing and operation of related components per the appliance's program logic
• Failure may present as no power, won't start, unresponsive or flickering display, random beeps, or recurring error codes

• 1 sub PCB assembly

• Disconnect power to the appliance before servicing; verify no voltage is present
• Use ESD protection and handle the board by the edges
• Photograph wiring; transfer connectors one at a time and ensure they are fully seated
• Secure the board with existing fasteners/standoffs; perform any required reset or diagnostic per your model's service info

This is the appliance's primary electronic control board. It regulates power and coordinates all core functions, helping restore normal operation when the unit won't power up, won't start cycles, or the controls act erratically.

• Directs power to key components and monitors inputs to run cycles correctly
• Interprets user commands and sensor feedback to manage functions
• Controls timing, display/indicators, and protective interlocks
• Typical symptoms of failure: dead display or no power, won't start, intermittent shutdowns, error codes, or unresponsive buttons

• Disconnect power at the breaker or unplug the appliance before servicing
• Use ESD protection; handle the board by the edges only
• Photograph wiring; move connectors one at a time and avoid bending pins
• Reinstall in the original orientation; secure ground/standoff screws, restore power, and run a test.