Lfxs29626 Parts

This ice maker lever is the mechanical arm that controls ice production by interacting with the ice maker's on/off and level-sensing mechanism. Replacing a broken or missing lever restores proper operation and helps prevent overfilling or no-ice conditions.

• Acts as the ice maker's shut-off arm to regulate ice production
• Lowers to allow ice making; raises to stop when the bin is full
• Common symptoms: ice maker won't stop making ice, no ice when arm is stuck up, broken/missing lever, lever won't stay in position
• Helps ensure consistent, reliable ice production control

• Disconnect power and shut off water before service
• Remove the ice bin to access the ice maker; gently release the lever from its pivots/linkage
• Note lever orientation; transfer and reuse any original springs, clips, or fasteners
• Reinstall components, restore power, and verify free up/down movement of the arm

This adjustable leveling leg assembly supports and stabilizes your appliance by threading into the base frame. Replacing a worn or missing leg helps you level the unit for smoother, quieter operation on uneven floors.

• Provides height adjustment to level the appliance and distribute weight evenly
• Helps prevent rocking, wobbling, and excess vibration or rattling
• Can improve door alignment and smooth opening/closing when the cabinet is properly leveled
• Useful when a leg is missing, damaged, or threads are stripped

• Disconnect power; if applicable, shut off the water supply
• Use a helper to safely brace or tip the unit; protect flooring when accessing the leg
• Unthread the old leg and hand-thread the new one; tighten as needed
• Adjust front-to-back and side-to-side until stable; all legs bear weight evenly

This display cover assembly is the front bezel for the appliance's user interface. It protects the display area, aligns the buttons/touchpad, and refreshes the look of the control panel for clear, reliable selections.

• Provides the user-facing control panel/faceplate for the display
• Shields the display electronics from dust and minor splashes
• Supports and aligns buttons/touchpad labels for proper operation
• Common signs it's needed: cracked or missing bezel, loose or misaligned buttons, worn graphics, fogging inside the display window

• Disconnect power to the appliance before servicing.
• Remove any screws and gently release locking tabs; avoid prying that can crack the new cover.
• Note orientation and transfer any reusable trim pieces from the old cover if present.
• Seat all tabs fully and reinstall screws; restore power and test controls.

The Filter Assembly, Head is an OEM replacement part for LG refrigerators. As an essential filtration component, the filter head houses the water filter and is responsible for dispensing clean, filtered water through the refrigerator's dispenser. It works to remove contaminants and improve taste.

Causes of a bad filter head can include normal wear and tear over time, mineral buildup within the head that impacts water flow, or damage to the head itself from accidental impact.  

Symptoms of a bad filter head include:

• Reduced or slow water flow from the dispenser 
• Noticeable declines in water filtration effectiveness
• Leaks or water damage around the filter head area

This OEM LG part is also compatible with select Sears/Kenmore brand models.

This door stopper assembly mounts at the hinge to control how far the door opens and promote smooth, consistent closing. Replacing a worn or broken stopper restores proper door swing and helps protect the hinge from overextension.

• Limits the door's opening range to prevent overextension
• Guides and cushions door movement for a smoother close
• Helps maintain door alignment at the hinge area
• Common symptoms: door swings too far, doesn't stop at the usual angle, clicks/binds near the hinge, or visible cracks/wear on the stopper

• Disconnect power to the appliance before servicing
• Support the door and use a helper when loosening hinge hardware
• Note the original orientation and transfer any spacers/shims if present
• Tighten fasteners evenly and verify smooth door operation before finalizing reassembly

The Drawer Cover Assembly is an OEM part for LG French door refrigerators featuring sliding drawer panels. This assembly covers the top edges of the internal crisper and deli drawers.  

Symptoms of a bad drawer cover assembly include:

• Gaps allowing moisture to drip onto contents below  
• Covers difficult or stiff to open and close accompanying drawers
• Cracks or punctures reducing the ability to protect items  
• Covers detaching from their fixed positions   

Causes of failure can be repeated use taking a toll on plastic through daily expansion and contraction, cracks developing from impacts over time, or general wear reducing insulation sealing capabilities.

Replace yours today with this genuine OEM LG assembly to maintain optimal organization and safeguard your stored items.  This replacement part is also compatible with GE and Samsung drawer-equipped refrigerators.

The Magnet Switch is an OEM part for LG refrigerators. It plays an important role in monitoring the position of the refrigerator door. 

The magnet switch works together with a magnet installed in the door gasket to detect when the door is opened or closed. It communicates this information to the control board which uses it to manage temperatures and fan speeds accordingly. 

Causes of a bad magnet switch can include wear and tear over time, physical damage, or failure of internal components. 

Symptoms of a bad magnet switch include:

• Improper cooling and freezing performances 
• Inability to detect when the door is opened
• Erratic temperature fluctuations
• Errors codes relating to door sensors

This genuine OEM LG magnet switch restores the door monitoring functions of your refrigerator. It is also compatible with Sears/Kenmore refrigerator models.

This holder is a small mounting bracket that secures a mating component in place inside the appliance. Replacing a cracked or missing holder restores a firm, rattle-free fit and proper alignment.

• Provides a stable mount for the designated part
• Prevents shifting and vibration that can cause noise or premature wear
• Common signs of failure: broken tabs, stress cracks, or the attached part sagging or falling out
• When damaged, the connected component may be loose, noisy, or misaligned

• Disconnect power; if working near water tubing, also shut off the water supply
• Note the original orientation and mounting points; take a photo before removal
• Reuse existing fasteners and avoid overtightening to prevent cracking the plastic
• Ensure the attached component is secure and clears any moving parts before restoring power

This refrigerator water inlet valve assembly controls and directs the house water supply to the dispenser and ice maker. Replacing a sticking or leaking valve restores proper filling and dispensing and ensures the valve shuts off water reliably.

• Routes water from the supply line to the dispenser and ice maker when energized
• Stops water flow when not energized to help prevent drips, overfilling, or leaks
• Common symptoms of a failed valve: no water at the dispenser, no ice or small cubes, slow/intermittent flow, or leaking near the valve

• Disconnect power and shut off the water supply before servicing
• Dispense water to relieve line pressure; place a towel or pan to catch residual water
• Note/label tubing and wire connectors; push tubes fully into quick-connect fittings and tug gently to confirm they're seated
• Turn water back on and check for leaks, then restore power and run water to purge air from the system

This cabinet roller supports the refrigerator and lets the unit roll in and out of place for cleaning or service. Replace a worn or broken roller to restore smooth movement and help keep the appliance properly positioned.

• Supports the base of the refrigerator and enables rolling movement
• Helps with safe positioning and service access without dragging
• Common failure signs: appliance is hard to move, scraping or rolling noises, a flat-spotted/cracked wheel, or a wheel that won't turn
• Replace when the roller is damaged, seized, or missing

• Disconnect power and shut off water supply; protect flooring before moving the appliance
• With help, pull the refrigerator forward and safely support it to access the roller
• Remove mounting fasteners, install the new roller, and reuse original hardware
• Confirm level and smooth movement before returning the unit to its location

Replacement tray assembly for the fresh room that supports the crisper/drawer and helps contain spills. Restores a stable storage surface to keep produce and deli items organized and the compartment easier to clean. What it does

• Supports the fresh room/crisper area and provides a flat surface for stored foods.
• Contains minor spills and drips to protect the interior below the drawer.
• Helps keep the crisper drawer aligned and sitting level.
• Common symptoms: cracked or broken tray, sagging or misaligned drawer, or visible leaks under the fresh room.

• Disconnect power and remove food before starting service.
• Remove the crisper/drawer to access the tray.
• Install by seating the tray into the drawer supports until it snaps or rests securely; replace drawer and test operation.
• Use gloves to protect hands from sharp edges and follow the refrigerator service manual for model-specific steps.

This replacement funnel channels flow cleanly through the dispenser/fill area, guiding it into the correct passage to help prevent spills, drips, and messes when the original piece is cracked, warped, or missing.

• Guides flow into the correct passage within the dispenser or fill area
• Helps reduce drips, leaks, and misdirected flow caused by damage or wear
• Restores clean, accurate dispensing and a tidy appearance
• Common symptoms include leaking/dripping at the dispenser, misdirected stream, visible cracks, or a loose/missing funnel

• Disconnect power; shut off water supply if applicable
• Remove surrounding trim or fasteners carefully and retain hardware for reuse
• Clean the mounting area before installing the new funnel
• Ensure tabs/locks fully seat; secure fit before restoring power and water

This holder assembly is a structural mounting piece that supports and secures an internal component in your appliance. Replacing a cracked or worn bracket helps restore proper alignment and keeps parts stable during everyday use.

• Provides a rigid mounting point for the attached component
• Keeps parts aligned to reduce movement and vibration
• Helps prevent rattling or noise from loose mounts
• Common signs of failure: visible cracks/broken tabs, looseness, or parts that won't stay seated

• Disconnect power and, if applicable, turn off the water supply before service
• Note the orientation of the original part to match fitment
• Reuse existing mounting screws or hardware unless the manufacturer specifies otherwise
• Do not overtighten fasteners; the secured component is fully seated and stable

This display cover is the molded trim that protects and finishes the user interface area of your appliance. Replace a cracked or missing cover to restore a clean look and help keep the controls properly supported and easy to see.

• Shields the display/control area from dust, moisture, and everyday wear
• Provides the finished bezel/trim for the user interface
• Helps keep buttons or touch areas aligned and supported
• Typical signs of failure: cracked or broken cover, loose/missing trim, scuffs, or controls that don't sit flush

• Disconnect power to the appliance before servicing
• Access the control area; release retaining tabs or remove screws securing the old cover
• Reuse original screws/clips as required by your model
• Seat the new cover evenly; avoid overtightening to prevent cracking

This power cord assembly supplies AC power from the wall outlet to your appliance. Replacing a frayed, heat-damaged, or loose cord restores safe, reliable operation and can eliminate intermittent power loss.

• Carries line voltage and ground into the unit to power controls and components
• Routes electricity safely into the cabinet to protect internal wiring
• Replace at the first sign of damage to reduce shock or fire risk

• Disconnect power at the outlet/breaker before servicing
• Compare the new cord to the original; transfer any clips or grommets from the old cord if needed
• Route and secure the cord exactly as original; keep clear of sharp edges and moving parts
• Ensure all connections are fully seated and the ground is properly secured before restoring power