Lfxs29766s Parts

Restore organized, secure door storage. This replacement door bin/basket mounts on the refrigerator door to hold bottles, condiments, and small items so they stay contained, easy to reach, and off the main shelves. What it does

• Attaches to the refrigerator door to provide additional shelf storage
• Helps organize jars, bottles, and condiments for quick access
• Replace when cracked, warped, or with broken mounting tabs
• Symptoms include the bin falling off, not seating level, or items tipping/spilling

• One refrigerator door bin/basket

• Remove all items, then lift the old bin straight up to release from the door tabs
• Align the new bin with the mounting guides and press down until fully seated
• Verify it locks in place before loading; avoid overloading
• Handle plastic carefully; wear gloves if old parts have sharp edges

This LED light assembly illuminates the refrigerator interior when the door opens, delivering bright, efficient lighting so you can easily see items. Replace a failed module to restore proper visibility inside your fridge.

• Provides interior illumination for the fresh food or freezer compartment
• Turns on and off with the door switch
• Helps you quickly find items and check food condition
• Common symptoms: no light when doors open, flickering/strobing, dim or intermittent lighting

• Disconnect power to the refrigerator before servicing
• Remove any lens/cover, release retaining tabs, and unplug the wire harness to remove the old module
• Connect the new assembly, align tabs, and snap/secure it into place; reinstall the cover
• Restore power and verify operation; the door switch activates the light

This replacement freezer tray holds and organizes frozen items inside the freezer compartment. Restore safe, stable storage and a proper fit when the original tray is cracked, warped, or missing.

• Provides a dedicated surface to store and organize frozen items
• Fits the designated location in the freezer to maintain proper spacing
• Replace if the tray is cracked, broken, warped, or missing
• If the tray no longer seats securely or items tip over, a new tray is needed

• Disconnect power to the refrigerator before servicing
• Remove food from the area and the damaged tray
• Allow plastic parts to warm slightly to reduce the risk of cracking
• Position the new tray fully into place and ensure it sits flat and secure

The Dispenser Drip Tray is an OEM part for LG refrigerators. Positioned discreetly below the dispenser spouts, this drip tray collects any accidental overflow or spills from beverage containers.

Causes may involve cracking or deformation of plastic over extended use. Mineral scale marks or stains are also common.

Symptoms of a bad dispenser drip tray include:

• Puddles or stains around the base of the dispenser unit
• Overflow running inside the refrigerator cabinet
• Odors developing from residual liquids near warm compressor

This OEM LG part is also compatible with some Kenmore models.

This drain tube assembly channels defrost water from the evaporator to the drain pan, preventing leaks and water buildup. Replace a cracked or clogged tube to restore proper drainage and reduce puddles or ice inside your refrigerator.

• Directs defrost water from the drain outlet to the drain pan
• Helps prevent water leaks inside the fresh food or freezer compartment
• Addresses issues from a tube that is cracked, kinked, or obstructed by debris/ice
• Common symptoms: water under crisper drawers, puddles beneath the unit, or ice forming at the freezer bottom

• Unplug the refrigerator before servicing
• Access the drain outlet and remove any ice or debris from the drain path
• Fully seat the tube at both ends to ensure a secure, leak-free fit
• Test by pouring a small amount of warm water into the drain to confirm proper flow to the pan

This replacement gasket seals the Home Bar (door-in-door) access panel on your refrigerator. A fresh, flexible seal stops warm-air leaks that cause condensation, frost, and temperature fluctuations, helping the unit run efficiently and keep food cold.

• Forms an airtight seal around the Home Bar/door-in-door panel
• Helps maintain proper interior temperature and humidity
• Common symptoms: visible gaps, torn or warped gasket, condensation or frost near the panel, door not closing flush
• Restores reliable closing and reduces unwanted airflow

• Disconnect power before servicing
• Open the Home Bar panel, pull the old gasket from the channel, then align and press the new gasket fully into the groove—seat corners first
• Warm the gasket (hair dryer on low or soak in warm water) to relax folds; do not overheat
• Close and check for an even seal; adjust by massaging the gasket into place as needed

This center hinge assembly supports the refrigerator door at the mid-hinge position and allows smooth, reliable pivoting. Replacing a worn hinge restores proper alignment so the door closes and seals as designed.

• Provides the pivot point at the center hinge location
• Supports door weight to maintain alignment and clearance
• Helps ensure even gasket contact for an effective seal
• Common symptoms: door sagging or rubbing, squeaking at the hinge, difficulty closing, visible play or damage at the hinge pin

• Unplug the appliance and remove items from the door to reduce weight
• Support the door while removing the center hinge fasteners
• Note and transfer any spacers/washers in the same order and orientation
• After installation, align the door and verify the gasket seals evenly

Replacement door basket that restores convenient storage on the appliance door, keeping bottles and small items secure and accessible. Replaces damaged or missing door bins to help keep your appliance door organized and usable. What it does:

• Provides a secure shelf on the appliance door for bottles, condiments and small containers.
• Replaces cracked, chipped or broken door bins that no longer hold items safely.
• Restores lost or reduced door storage capacity for easier organization.
• Helps prevent items from falling out of the door during normal use.

• Disconnect power (unplug or switch off) and remove all items from the door before starting.
• Most installations are hand-operated: lift or tilt the old bin out of the door track, then seat the replacement into the same track—do not force.
• Inspect mounting clips or supports during replacement; damaged clips must be replaced separately.

The Defrost Heater is an OEM part for LG French door refrigerators. It is an electrical heating element located inside the fridge compartment or freezer that automatically activates to melt frost and ice buildup during defrost cycles. Subject to temperatures cycling between warm and cold, the heater coil must withstand expansion stresses. 

Symptoms of a bad defrost heater include:

• Accumulating frost that decreases available storage space over time  
• Extended defrost periods not fully melting all accumulated ice
• Buzzing or clicking coming from the refrigerator compartment 

Causes can be cracks in the heater coil's insulation allowing moisture to penetrate over many years of use. Replace with this new OEM LG defrost heater to ensure automatic removal of frost for fresher food storage. It is also compatible with Sears/Kenmore French door models.

This Front Cover Assembly is the outer panel that protects internal components and restores the appliance's appearance. It replaces a damaged or worn front cover to help maintain safe operation and a clean finish. What it does:

• Covers and protects control components, wiring, and internal mechanisms from dust and debris
• Restores cosmetic appearance when the original cover is cracked, dented, or discolored
• Helps ensure proper alignment and fit of adjacent trim and door components
• Reduces risk of foreign objects entering the appliance through the front opening

• Disconnect power (and water, if applicable) before beginning any repair
• Handle edges carefully; use gloves to avoid cuts or damage to the finish
• May require removal of trim, bezel, or adjacent panels
• Verify fit and part number against your appliance before installation

This grille assembly is the outer fan cover that protects the dryer fan and helps direct airflow. It replaces a damaged or cracked grille to restore proper airflow clearance and prevent debris from contacting the fan. What it does:

• Covers and protects the blower/fan area from loose items and lint
• Helps maintain correct airflow path for efficient drying and venting
• Reduces rattling or vibration caused by a cracked or loose grille
• Prevents small objects from entering the fan housing and causing damage

• One grille assembly (fan) as shown

• Installation requires access to the dryer's front or rear panel depending on model
• Unplug the appliance and shut off gas before starting work
• Inspect surrounding trim and fasteners; replace any broken clips or screws for a secure fit

This door basket is a direct-fit replacement refrigerator door bin that restores door storage for bottles, jars and other items. It keeps door contents secure and organized so you can use the full door storage again. What it does:

• Replaces a cracked, broken or missing door bin that no longer holds items securely
• Provides stable storage for bottles, condiments and small containers on the refrigerator door
• Restores proper door seal clearance by returning the original bin height and fit
• Helps stop items from falling out when the door is opened or closed

• One refrigerator door basket/bin

• Remove all contents from the old door bin before starting
• Most installations snap into place: align mounting tabs with door slots and press until it clicks
• If screws or clips are present, retain original fasteners and reinstall as needed
• For safety, handle glass/jar contents carefully and avoid forcing parts; unplug the appliance if you will be working inside sealed compartments

This customized screw secures internal or external appliance components to restore proper fit and reduce movement. Use it to replace missing or damaged fasteners so panels and assemblies stay firmly attached during normal operation. What it does:

• Fastens panels, brackets, or small assemblies to maintain structural stability
• Prevents rattling, vibration noise, or loose trim caused by missing screws
• Restores correct alignment where a stripped or damaged screw allowed movement
• Works as a direct replacement for the matching screw specified for the repair

• One screw

• Disconnect power and water supply before starting any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Tighten securely but do not overtighten to prevent thread damage
• Keep small parts away from children and retain any removed hardware for reuse if needed

This cover assembly protects the machine components and helps keep internal machinery free of debris and accessible for repair. It provides a durable barrier that helps extend component life and maintains safe operation. What it does:

• Shields motors, belts and internal linkages from dust and lint that can cause wear
• Helps contain moving parts to reduce pinch or contact hazards during normal use
• Maintains proper component alignment by providing a stable mounting surface
• Commonly replaced when cracked, warped, missing fasteners, or damaged from impact

• One cover assembly as shown

• Disconnect power before attempting service
• Handle gently to avoid cracking plastic tabs; inspect mounting clips and screws for damage
• Reuse original fasteners only if undamaged; replace any stripped screws or broken clips

This filter cover replaces the damaged or worn cover that holds the air filter in place, helping maintain correct filter position and airflow for proper operation. It's a direct-fit replacement designed for easy swap-out. What it does

• Secures and protects the air filter inside the unit so the filter seals and sits correctly.
• Maintains proper airflow path to help the system run as designed.
• Prevents debris from bypassing the filter and entering internal components.
• Helps reduce rattling or vibration caused by a loose or broken cover.
• Restores the intended fit and finish of the filter compartment.

• One filter cover

• Disconnect power or remove batteries before removing the old cover to avoid fan or electrical hazards.
• Remove the old cover by releasing clips or screws; align replacement and engage clips or reinstall screws securely.
• Do not force the cover—ensure filter is seated correctly before closing to avoid damage.
• Replace hardware with OEM-equivalent parts for proper fit.

This replacement drawer guide helps the freezer/refrigerator drawer slide smoothly and stay aligned for reliable opening and closing. It restores stable support and reduces sticking or noisy movement. What it does:

• Guides the drawer along its track so it opens and closes smoothly
• Supports the drawer weight to prevent sagging or misalignment
• Helps eliminate binding, catching, or uneven movement
• Reduces scraping or rattling noises caused by a worn guide

• Disconnect power to the appliance or unplug before beginning any work
• Remove the drawer and any contents to access the guide mounting points
• Align the guide with the existing track and secure using the original screws or fasteners
• If mounting hardware is damaged or missing, replace with OEM-specified fasteners; do not force parts into place