Lh15801w0 Parts

This on-off switch terminal is composed of electrical contact areas that connect to a charge or load on a battery. One is marked for positive current while the other is where the current returns to. These terminals can sometimes stop working or suffer corrosion which makes them dangerous to use. Brushing and cleaning a terminal can help remove dirt and debris, but a malfunctioning terminal requires a replacement. This is the case if the corrosion is severe enough to eat away at the metal or the terminal doesn’t clamp on the way that it should. The battery terminals can be removed and replaced using tools like pliers, a socket set, a wrench set, and a hacksaw. This terminal is a genuine OEM component directly from the manufacturer. It’s designed to be used on engines of snowblowers, lawnmowers, chipper shredders, and tillers. It is compatible with Tecumseh, Husqvarna, Toro, Troy-Bilt, Craftsman, Simplicity, Cub Cadet, Briggs & Stratton, and MTD equipment. Some items that can help with installation include anti-corrosion spray, felt pads, and heat-shrink tubing.

Here is a genuine replacement governor shaft that can be used with many types of small engines. The metal governor shaft is used in the cylinder cover to help hold the governor spool and the gear. Without a properly functioning governor shaft, it will cause performance issues with the machine. The shaft is made from metal, and it is durable. However, there may still be a need to replace it at some point. It could have become corroded or damaged, or it could have become lost during another repair. Regardless of the reason, owners will want to replace it sooner rather than later. A wrench and pliers will be needed to make the replacement. This is an authentic OEM part that is the same as the original on the machine. It is sold individually. The part can work with many makes and models of lawnmower, snowblower, log splitter, generator, wood chipper, pressure washer, and other small engines. Compatible brands include Briggs & Stratton, Craftsman, Toro, Tecumseh, Lawn-Boy, Snapper, MTD, and Simplicity.

This is a recoil pull starter used in various snowblowers from major manufacturers. The recoil pull starter is a part of the starter assembly and assists with ensuring the engine gets the right amount of power to start when a user pulls the starter rope. Wear and tear or impacts can cause damage to the starter and it will eventually fail. One of the primary symptoms of a bad recoil pull starter is a slack pull cord when trying to engage the engine to use the snowblower. If this occurs, the recoil pull starter needs to be replaced.Turn off the snowblower and disconnect the spark plug wire before removing the recoil housing cap. Untie the pull rope and replace the starter with a new replacement component. Re-tension the spring with the new recoil starter before reattaching the cap that holds the pulley. Reinstall and coil the cord before reassembling other components.This is a genuine OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual component. The recoil pull starter is designed to be compatible with snowblowers manufactured by Lawn-Boy, Toro, Tecumseh, and Cub Cadet.

The float shaft and pin are a genuine replacement for select Tecumseh carburetors on small lawn and garden equipment engines. The float shaft and pin are responsible for maintaining the fuel level within the carburetor. Over time because of repetitive motion, the float pin and shaft can break or become damaged, which will stop the carburetor from functioning properly. If the carburetor cannot function, the engine will not be able to perform. If left unattended, the engine and carburetor could fail completely or bigger issues could occur. Replacing the float is essential to getting the equipment back in order. This genuine float shaft and pin is designed for use on machines from Tecumseh, Poulan, Husqvarna, Lawn Boy, Cub Cadet, MTD, and Craftsman, and is compatible with a number of models. The fuel system should be drained and the engine should be cool before any engine repairs are started. Always wear gloves for hand protection. This float shaft and pin are made of durable materials and sold as a unit. No additional hardware or parts are included.

This is an oil drain cap for lawn equipment. It is sometimes called a pipe cap. It sits at the bottom or side of the oil pan and helps to ensure that the oil in the motor does not leak out. If the oil drain cap is stripped or not functioning properly, it could mean the engine will start to leak oil, which will hamper the performance or cause additional damage.This component may start to corrode with extended use, or the threads could become damaged. The oil drain cap is relatively simple to replace. A wrench will be needed to replace this part. Wait until the engine is cool and then disconnect the spark plug wires before starting work.This oil drain cap is intended for use with lawn equipment from Tecumseh, Toro, MTD, Husqvarna, and Craftsman. The piece is sold individually, and it is a genuine OEM replacement part.

This part is a replacement choke bracket. This is a genuine OEM part made by Tecumseh and has been sourced directly from the manufacturer. This part can be used to replace a defective or damaged choke bracket on a variety of power equipment. The choke bracket ensures that the engine's choke is held securely in place. The choke is responsible for restricting air flow to the carburetor in order to enrich the mix of fuel and air. The choke must be properly secured in order for the engine to function reliably. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. For more accurate information on how and where to install this choke bracket, the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this choke bracket is suitable for use on several different models of small engine outdoor power equipment manufactured by Tecumseh, Husqvarna, Toro, and Lawn Boy. This is a genuine part made of high-quality, durable materials and is sold individually.

This part is an oil filler tube. The oil filler tube is what directs replacement oil into the engine when oil is being replaced or added to the engine. This allows the user to easily fill the engine with oil. A new oil filler tube may be needed if there is any sign of wear or damage to the part. If there are any leaks when refilling the engine with oil, then the oil filler tube should be replaced.This part is a genuine Tecumseh part and is an OEM part sourced directly from the manufacturer and it is sold individually. This oil filler tube is compatible with chippers, shredders, edgers, engines, pressure washers, vacuums manufactured by Tecumseh, Husqvarna, Toro, Lawn-Boy, Cub Cadet, and MTD.

This genuine replacement part is a Tecumseh screw sized 1/4-20 x 2-1/2. It is a hex screw. This screw has a variety of applications for many types of lawn and garden equipment including lawn tractors and snow blowers. This screw is important to the proper functioning of the product, and has a variety of applications depending on the model of the product. This screw is used to fasten or hold parts of the equipment together. Screws can often wear down or become damaged through extended normal use and may not last the full life cycle of the product, leading to improper or unsafe operation. This part is an identical replacement for a screw that is missing, worn out, or damaged. Prior to working with this part, please refer to the original product manual for installation instructions. A screwdriver is required for proper installation of this part. For safety, always wear gloves and ensure unit is powered down prior to performing any installation or repair.This high quality OEM replacement part is sourced directly from the manufacturer, and it is sold individually. It is made of high-quality metal.