Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Replacement screw for washers. Used to secure various components including handles, panels, and internal parts. Order if original is missing or stripped.
After shopping for a new Whirlpool Thin Twin Stack, Found appliance parts pros online and decided to take it apart to see if repair was a possibility. APPro's online instructions were easy to follow, in a couple hours it was apart, and I placed the order. Reg ground took a week from NY, so the laundry piled up that week. The parts arrived on Monday morrning, by afternoon the machine was running like new! The cause was the belt tensioner pulley had frozen. Replaced it, drum wheels,snap... Read more
Supports the front drum edge for smooth, quiet rotation. Replace when worn to stop scraping noises or drum wobble. Confirm fit with your model number.
Replace parts worn i repair appliance for60 years i am79 Read more
If your dryer motor has come loose or makes grinding noises, this motor clamp secures the drive motor. Simple DIY repair with basic tools in under an hour.
Replaced the motor, blower, rear drum felt seal, and drive belt. Vacuumed up the lint everywhere, cleaned extra lint out of the chute, around the blower, and rear vents. Read more
Includes two bumpers and two locking clips for securing dryer panels. Replace if clips are broken or missing to prevent rattling. Confirm fit with your model.
Our 19 year old Whirlpool dryer quit heating. After checking the thermal fuse, I found the ignitor electrically open. I bought an ignitor at a local store as there was a national holiday the next day and I did not want the dryer inoperative waiting several days for shipping. I can say AppliancePartsPros is MUCH cheaper for the identical Whirlpool genuine part. While changing the ignitor, I noticed there was an excessive amount of lint in the dryer, which was caused by worn drum seals. I ordered... Read more
Heat-resistant fiberglass gasket seals your oven door perimeter to maintain consistent temperatures. Replace when worn, frayed, or flattened to restore efficiency. Verify fit by model number.
Type AB #8-18 x 5/8 inch thread-forming screw secures panels and components in appliances. Replace missing, stripped, or corroded fasteners.
It was very easy to fix after watching your video.. Read more
Dryer not heating or running too hot? This high-limit thermostat regulates temperature to prevent overheating. Easy DIY fix takes 30 minutes or less.
FIRST I PULL THE DRYER OUT FROM THE WALL AND TOOK THE BACK OFF. WITH A 5/16 NUT DRIVER. NEXT WITH A LIGHT SET UP I LOOKED FOR ANY BURNT, BROKEN,OR LOSE WIRES THAT MY HAVE COME OFF ANY CONNECTIONS. I HAVE AN ELECTRIC DRYER AND AS I LOOKED DOWN TO THE HEATING COIL AREA, WHAT I WILL CALL A HI-TEMP SWITCH I COULD SEE THAT THE PART APPEARED BURNT. I PULLED THE POWER PLUG AND TOOK MY VOLT, OHM, MIL'LI'AMP METER, SET IT TO OHMS ON ABOUT 20K. THEN I TOOK MY NEEDLE NOSE PLIERS AND PULLED ONE WIRE... Read more
Supports and pivots the hinged dryer top panel for service access. Replace if cracked, broken, or causing wobble, scraping, or alignment gaps.
Installed a new Ignitor & Thermal Fuse. Read more
Almond spray paint for appliance exteriors. Covers scratches, chips, and worn finishes on refrigerators, freezers, and other units. 13 oz can.
Was able to match it pretty well the natural age difference was good. The delivery of the product was amazing it took less than 24 hours to get to me and that was standard shipping. Give you guys an A for great !! Read more
Touch-up paint for appliances in almond color. Repairs chips, scratches, and worn spots on ovens, refrigerators, microwaves, and dryers.
Replaced. Shippping was very fast. A good experience. Read more
Right-hand hinge for dryer lint filter cover. Replaces broken or missing hinges that hold the lint screen door in place. Easy snap-in installation.
Replaced front bearing and seal kit, rear drum roller kit, idler pulley, and dryer belt. Read more
Connects lint screen lid to dryer, enabling smooth opening and secure closing. Replace when bent, cracked, or broken to restore proper lid operation.
I replaced it Read more
Replacement drum baffle that lifts and tumbles clothes inside the dryer drum. Needed when original is cracked, broken, or missing from the drum wall.
Gray acrylic spray paint for coating worn or chipped dryer drum interiors. Restores the protective finish when the original coating is scratched or flaking.
Completely removed dryer drum cleaned surfaces ready for paint applied paint acquired from you it did a wonderful job with one can of paint will use for a while and acquire another can of paint for second coat thank you so much for your help the whirlpool dryer drum paint was exactly what it said it would do Read more
Fix dryer drum rattling noise with this lock nut. Secures drum rollers, pulleys, and shafts to prevent loosening from vibration. Simple DIY fix.
The cylinder roller that supports the dryer drum was worn and needed to be replaced. I ordered the idler pulley shaft and associated parts as well since I wasn't sure if these were worn too. Watching the video on the web site gave me a good idea what was involved and where to look. It wasn't my exact model and make but provided sufficient information on what to look for. The parts were exact fits which was a great relief abd the dryer is running like new again! Read more
Fix excessive dryer noise or vibration with a new motor base. This support bracket secures the motor assembly for stable alignment and quiet operation.