Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Wire connector block for washers. Transfers electrical connections between wiring harnesses. Replace if connector housing is cracked or melted.
Replacement gear case cover for washers. Installs on the transmission housing. Needed when original is cracked, broken, or missing. Includes gasket sealer.
Washer won't stop spinning smoothly or makes loud jerking noise when stopping? The brake shoe stops the tub during spin cycles. DIY repair in 1-2 hours.
First I looked at the many you tube vids, and there are many. appliance parts pros pretty much shows you how to deal with the parts. I changed the brake shoes and the clutch assembly which also comes with the driver cam. I also changed the metal brake operating cam. I think that brake lockup or improper brake release was the problem that broke the plastic cam driver. This was the broken plastic part making all the ticking noise. I first changed the coupling on the motor but that wasn't bad. in... Read more
Usually ships within 4 - 14 days
Washer motor shield deflects water, lint, and debris away from the drive motor. Replace if cracked or missing to prevent motor damage. Simple install.
Timer knob and dial kit for washers. Includes two knobs and one dial. Replacement for cracked, broken, or missing timer controls on your washer.
Removed control knob that was broken also. Removed two screws and tilted top panel back. Removed two screws holding timer in place. Disconnected wiring harness from bad timer. Reconnected wiring harness to new timer. Used two new screws provided to place timer in position. Let top panel down and replaced two screws holding it down. Installed new control knob. Read more
Fix a washer that won't spin or leaves clothes soaking wet. This cam sleeve bushing supports the cam shaft to restore proper spin cycle operation.
The spin tube bearing and the cam sleeve needed to be replaced. Read more
Rusted or missing motor shield letting debris reach your washer motor? This protective cover blocks foreign objects and secures the motor assembly. DIY repair.
The repair was simple. Having used Appliance Parts Pro in the past for much needed repair parts, I simply unplugged the machine, turned off the water and removed the drain hose and slid unit forward. I then removed the top control panel like last time, tilted the body forward and set it aside. I unfastened the upper hose to the water pump and slid what was left of the old shield out and slid the new replacement shield back into place then reattached the flex hose. The shield slipped right... Read more
Insulation pad that cushions and protects the washer's rear cabinet panel. Replace if cracked, compressed, or missing to reduce vibration and noise.
Almond control knob for washer control panels. Replaces cracked, broken, or missing knobs that prevent cycle or temperature selection adjustment.
Secures the capacitor tube in your washer. Replace if broken or loose to prevent rattling and ensure proper motor operation. Verify fit with your model.
Replaced the clutch and water pump Read more
Touch up paint for appliances with chips, scratches, or worn spots. Includes brush applicator. Restores finish on damaged surfaces. 0.6 fl oz.
I ordered harvest gold touch-up paint and painted over the area. So far, the paint staying and I think it looks fine. This surely beats replacing the whole tub! Read more
Washer making grinding noises or not spinning? This motor mount plate secures the drive motor to the gear case, preventing movement and vibration.
Complete base frame assembly for direct drive washers. Includes structural support components, leveling links, springs, and mounting hardware. Replaces rusted, cracked, or broken frames.
I ordered a Base frame assembly and front leveling feet along with locking nuts. I removed the broken parts by putting the washer on its' side and I removed the bolts on the bottom of the back panel and removed the motor and the transmission. I installed the new feet onto the new base frame and i slid the new frame into place and then I reattached everything. Read more
Dryer won't start or has power issues? This 3-way terminal block receptacle connects the power cord to your dryer's electrical system. DIY-friendly.
White acrylic touch-up paint for appliances. Covers scratches, chips, and scuffs on refrigerators, washers, dryers, and ranges. 1-quart can restores finish.
Harness retainer secures wiring harnesses inside your washer cabinet. Replace if cracked, broken, or missing to properly route and protect wires.