Lmv 1630Ww Parts

This microwave lamp holder secures the light bulb and provides the electrical connection, helping restore dependable lighting for cooking and checking food. Replace a cracked, heat-darkened, or loose socket to address a light that won't turn on or flickers.

• Holds and insulates the bulb while connecting it to the microwave's wiring
• Common symptoms include no light, flickering, intermittent operation, or visible burning/cracking of the socket
• Restores solid electrical contact so the light works with the door or light switch
• Direct replacement for a damaged or worn lamp holder on select units

• Disconnect power at the breaker or unplug the appliance before servicing; microwaves contain high-voltage components
• Access location varies by model; note wire positions, transfer wires to the new holder, and secure with the original mounting hardware
• Restore power and test the light before fully reassembling

This canopy resistor regulates current to a range-hood or canopy fan circuit to help the blower run at the correct speeds. Replacing a failing resistor can restore proper fan speed control and stop intermittent operation. What it does:

• Controls electrical resistance in the canopy/blower circuit to help regulate fan speeds.
• Helps prevent the motor from running only on a single speed or from failing to start at selected speeds.
• Can cause symptoms such as inconsistent fan speeds, no response from speed controls, or occasional fan cutoff.
• Works with the hood's wiring and control switch to deliver the correct voltage to the fan motor.

• Disconnect power to the appliance before accessing the canopy or electrical connections.
• Inspect wiring and connectors for heat damage or corrosion; replace harness or terminals if damaged.

This keypad controller assembly is the user-facing control module that accepts button input from the appliance control panel and communicates commands to the main control board, restoring reliable input and display response. What it does:

• Converts button presses into signals the main control board can read
• Restores responsive or stuck/unresponsive buttons and touch controls
• Resolves intermittent control, unregistered inputs, or loss of panel feedback
• Addresses control-related error messages when caused by a faulty keypad interface

• Always disconnect power at the breaker or unplug the appliance before servicing
• Handle the assembly and any ribbon cables gently to avoid damage; avoid touching exposed circuit traces
• Reconnect all wiring and verify correct orientation before restoring power

This fuse assembly replaces a blown thermal fuse to restore overheat protection and help a dryer heat safely. It's the direct-fit component used in the appliance's safety circuit to shut off power if temperatures get too high. What it does:

• Interrupts power when excessive heat is detected to prevent overheating or fire risk
• Stops heating when the thermal element fails or air flow is restricted
• Commonly used when the dryer won't heat or trips the house circuit
• Works as part of the appliance's safety/temperature control system

• Disconnect power before inspecting or replacing the fuse to avoid shock or injury
• Replace only with the exact part number to retain OEM safety ratings
• Handle with care; do not attempt repairs on wiring or connectors
• After replacement, test the appliance on a short cycle and monitor for normal operation

This thermostat controls oven/dryer temperature by opening or closing its contacts as the appliance reaches set temperatures, helping maintain safe and consistent operation. Replaces a worn or failed thermostat to restore proper temperature regulation. What it does:

• Senses temperature and interrupts heating when limits are reached to prevent overheating
• Re-establishes heating when temperature falls, maintaining normal cycle performance
• Commonly installed when an appliance won't heat, overheats, or cycles erratically
• Works as a direct replacement for the OEM thermostat designed for compatible LG units

• One thermostat

• Disconnect power to the appliance before starting any repair to avoid shock or injury
• Note wire locations or take a photo before removing wiring; reconnect wires to the same terminals
• Use a multimeter to verify thermostat continuity and correct operation before and after replacement

This factory fastener secures appliance panels and components. Use it to replace a missing, stripped, or corroded screw so brackets, covers, and assemblies stay tight and properly aligned, helping reduce vibration and rattling.

• Secures panels, brackets, and internal components in their proper positions
• Replaces missing, worn, or cross-threaded hardware
• Helps eliminate vibration and rattling from loose parts
• Supports proper alignment of covers and assemblies

• Disconnect power to the appliance before servicing; allow any moving parts to stop
• Match this screw to the location shown in your model's parts diagram
• Start threads by hand to avoid cross-threading, then tighten snugly with the correct driver
• Do not overtighten to prevent stripping threads or cracking plastic bosses

The Transformer is an OEM part for LG microwaves. It is responsible for stepping down high voltage current from the wall outlet to safe low voltage used by the microwave's electronic control system. Located inside the microwave cabinet beneath the turntable mechanism, the transformer supplies precise power to crucial components including the magnetron, control console, and touch controls.

Causes of a transformer failing include stresses from constant heating and electromagnetic flux over many years, damage from water damage, or manufacturing defects.  

Symptoms of a bad transformer include:

• Microwave failing to heat or function 
• Faulty or unresponsive control panel and display
• Buzzing or humming noises emanating from inside

This genuine LG replacement ensures all electronic systems receive stabilized power safely. Compatible with Sears/Kenmore branded microwaves using LG components.

This door frame assembly replaces a damaged or cracked outer door frame to restore the washer/dryer door's appearance and structural support. It helps secure the door glass and maintain proper door alignment for safe operation. What it does:

• Replaces a broken, cracked, or warped outer door frame to restore form and function
• Supports and secures the door glass/window to prevent rattling or movement
• Helps maintain correct door alignment so the latch and seal engage properly
• Can reduce drafts, leaks, and vibration caused by a damaged frame

• Disconnect power (and water if applicable) before starting any repair
• Handle glass and frame edges carefully; wear gloves and eye protection
• Retain original screws and mounting hardware unless replacement parts are supplied
• Check door seal/gasket and latch engagement when reinstalling to ensure a proper fit

This is a truss-head tapping screw used to secure trim, panels, and small assemblies on compatible LG appliances. It provides a low-profile, wide-bearing head that helps hold parts flush and resist pull-through. What it does:

• Fastens plastic and sheet-metal components where a self-tapping thread is needed
• Truss head spreads load to prevent damage to soft or thin materials
• Helps secure control panels, brackets, or trim pieces that require a low-profile head
• Common replacement when original mounting screws are missing, stripped, or corroded

• One truss-head tapping screw

• Use the correct screwdriver bit and moderate torque to avoid stripping the screw or workpiece
• Start threading straight and let the screw form threads without forcing at an angle
• Disconnect power and follow appliance-specific service safety procedures before working internally
• Replace any damaged mating threads or clips for a secure fit

This truss head tapping screw secures interior panels and small components on compatible appliances, restoring proper fit and stopping rattles or loose trim. It's a direct hardware replacement for a single mounting point. What it does:

• Fastens panels, brackets, and trim where a low-profile truss head is required
• Replaces missing or stripped screws that cause rattling or loose parts
• Provides a secure hold by forming threads in sheet metal during installation
• Useful for repairing cosmetic or functional panel alignment issues

• Disconnect power before working on any appliance to avoid shock or injury
• Use the correct sized Phillips or Torx driver to prevent cam-out or screw damage
• Start straight and thread slowly; do not overtighten to avoid stripping sheet metal
• Replace only with the exact part number for best fit and performance

This replacement mounting screw secures panels and small appliance components to restore proper fit and prevent vibration or loose parts. A simple, direct replacement when the original fastener is missing or damaged. What it does:

• Secures panels, brackets, or small assemblies to keep parts aligned
• Stops rattling or vibration caused by loose or missing screws
• Restores normal fit where a stripped or corroded screw failed
• Matches the OEM fastener form for a correct, long-lasting fit

• Unplug the appliance or disconnect power before servicing
• Use the correct driver to avoid stripping the head
• Thread carefully and do not overtighten to prevent damage to threads or housing

This holder secures the door lock assembly to the washer, keeping the latch and lock mechanism aligned for reliable door closure and operation. Replaces a worn or broken lock mounting bracket to restore proper door engagement. What it does:

• Mounts and supports the washer door lock assembly to keep the latch aligned
• Holds the lock in place so the door can fully close and lock during cycles
• Common symptoms: door won't latch, door comes loose, washer won't start, or door/lock error codes
• Prevents excessive movement that can damage the lock or striker

• Unplug the appliance and turn off water supply before beginning work
• Basic hand tools (screwdriver, nut driver) are typically required; keep fasteners for reassembly
• Handle edges and the door/lock assembly carefully to avoid damage

This keypad controller assembly replaces a worn or unresponsive control panel keypad to restore reliable button input and cycle selection on compatible LG appliances. It provides the complete user-interface board used to send commands to the appliance control system. What it does:

• Registers button presses and relays user commands to the main control board
• Restores response when touch-buttons or mechanical keys stop working
• Can resolve intermittent or no-response control panel behavior
• Works as the integrated keypad and circuit assembly for the control panel

• Disconnect power to the appliance before starting any repair
• Handle the PCB and ribbon cable by edges and avoid static discharge
• Keep all fasteners and grounding wires for reinstallation; align ribbon connector fully before securing

This high-voltage transformer supplies the elevated voltage required by a microwave's magnetron so the oven can heat food. Replaces a failed transformer to restore proper high-voltage delivery and heating performance. What it does:

• Steps up the oven's line voltage to the high voltage needed by the magnetron
• Failsafe symptoms: microwave runs but does not heat, buzzing or humming from the oven, or a blown internal fuse
• Prevents intermittent heating and helps maintain consistent magnetron operation when functioning properly

• One high-voltage transformer

• Disconnect power and unplug the appliance before starting any repair
• The high-voltage capacitor can retain a lethal charge; discharge the capacitor before touching the transformer or related circuitry
• Verify the part number on your appliance matches EBJ60664602 before ordering