Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Replacement glass turntable tray for your microwave cavity. Sits on the roller support and rotates food during heating. Order if your tray is cracked or broken.
Bought new turntable. Read more
Microwave not heating or making loud buzzing noise? The high voltage diode regulates power to the magnetron. DIY repair typically takes 30-45 minutes.
LG Help-line said probably a failed magnetron, but since out of warranty,referred me to an authorized LG repair service. They wanted $79.95 service call to come out & diagnose problem. I ordered replacement magnetron for less than cost of a service call, Plus the part was delivered next day! Works like new again. Happy wife = happy life! Notes for DYI-ers: 1.Be careful removing over the stove microwaves--get help,they are heavier than you think. 2.Unplug microwave for 48 hrs, carefully... Read more
Fix uneven heating or broken turntable rotation with this microwave turntable assembly. Supports and rotates the glass tray for even cooking. DIY install.
It allowed the turntable to rotate level. Read more
Protective shield that covers internal components on the microwave door. Replace if cracked, broken, or tabs have snapped off during handle or latch repair.
Careful placement of new screws into the inside of the outer door that now hold the frame assembly to the door secured the frame assembly to the outer door. All of the other parts I bought and replaced were a waste of money. I figured since I had them I might as well install them anyways. Easier than sending them back since I had the whole thing apart anyways. The part I really needed was no longer available, the outside door. The glass reinstalled into the retainers in the door without a... Read more
Fix loud noise, humming, or overheating in your microwave. This cooling fan motor restores proper airflow. Moderate difficulty repair with basic tools.
Looked online and found that someone had experienced the same issue and had replaced the cooling fan assembly for the magnetron. I ordered the parts for the assembly (motor, fan, and support), and replaced them and this fixed the problem. It took about 10 minutes to replace the parts, but lowering the unit and disassembly took around 45 minutes. The most difficult part was getting the outer sheet metal cover back on after the repair, as it has a bunch of clips on each front edge that need to... Read more
Microwave won't turn on or has no power? A failed thermostat often causes complete power loss. Moderate DIY repair requires disassembly to access.
I checked for the reasons there was no power to the microwave. Then I talked with the technician at AppliancePartsPros who stated that it was most likely a blown or defective fuse. My LG microwave has two thermal fuses, a fuse assembly with two prongs and a short (1 inch) barrel type fuse. I replaced all of them after viewing YouTube videos and then reviewing the diagram for my microwave on the AppliancePartsPrps website. That was very helpful in locating where the fuses were installed. It... Read more
Fastens panels, brackets, and covers inside the microwave cabinet. Replace if cracked, broken, or missing to restore secure mounting and alignment.
The replacement parts fit very well. It took me about 2 minutes to fix. Read more
Turntable not rotating or making noise? This coupler shaft connects the motor to the glass tray for even heating. Takes seconds to install—no tools needed.
Ordered the proper part, installed it and the turntable now turns as required. Read more
Replace your microwave's cracked, scratched, or dented decorative front panel. This cosmetic cover installs on the exterior to restore appearance.
Holds the light bulb and maintains electrical connection in your microwave. Replace when socket is cracked, heat-damaged, or causes flickering lights.
Added an additional light socket to the existing reflector. Changed the original 40 watt incandescent bulb to two 5 watt LED bulbs. It's actually bright enough for my old eyes now. Read more
Fix loud rattling or scraping noises from your microwave with a new cooling fan blade. Prevents overheating by circulating air around internal components.
Fix F4 error codes or sensor cook failures with this microwave humidity sensor. Restores automatic cooking cycles. Moderate DIY difficulty.
Replaced the Humidity sensor, Thermistor and door switches. I replaced these thinking the problem was one of the items but didn't want to trial and error one part at a time. Plus the cost was reasonable so if these didn't help I wasn't out a lot of money. I sense the door switch was the problem. Replaced all items and the microwave works great. Thanks for the advice and the cost of the parts. Read more
Inner perimeter trim that snaps onto the microwave door frame. Secures the door choke and maintains proper shielding. Replace if cracked, broken, or missing.
1. UNPLUG MICROWAVE FROM AC POWER. 2. REMOVE 8 SCREWS FROM BASE PLATE ASSEMBLY/ 4 ON EACH SIDE. 3. CAREFULLY LOWER BASE PLATE DOWN AND UNPLUG RANGE LIGHT POWER CABLE 4. PLACE BASE PLATE DOWN ON FLAT SURFACE GENTLY PULL OUT VENT DRAW TO REMOVE SPRING TENSION FROM EACH SIDE OF THE DRAW TRACK. 5. NOW REMOVE 4 SCREWS, 2 FROM EACH SIDE OF THE DRAW TRACK TO GET ACCESS TO THE 3 FRONT DECOR SCREWS FROM THE BACK. ( YOU NEED 8 INCH #2 HEAD PHILIPS SCREW DRIVER TO... Read more
Microwave won't power on? A blown fuse assembly is often the culprit. This part protects your microwave's circuit from overcurrent and short circuits.
My son told me that almost all the microwave ovens that came into the repair center he worked at, 15 years ago, had a defective magnetron. I ordered a magnetron, and sat back until one shipped. The one that came, the first time, was in a small factory cardboard box, which was in a large bubble-pak Fedex envelope; which didn't show any signs of abuse. Inside, however, the factory box was beat up. Removing the magnetron, I noticed that the socket, as well as its' pins, was bent, and loose in the... Read more
Fastener nut secures internal components in your microwave. Replace if stripped, rusted, or missing to restore tight hold and proper panel alignment.
Disassembled and replaced ac motor. The hardest part was to pull the microwave out of the cabinet. Read more
This customized screw fastens specific panels, brackets, or internal components in LG appliances. Replacing a missing or stripped fastener restores a secure fit and helps reduce vibration, rattling, and premature wear. What it does:
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.