Lmxs307768/02 Parts

This display cover assembly is the outer bezel for the appliance's user interface. It protects the display and buttons, keeps the controls aligned, and refreshes the appearance when the original cover is cracked, loose, or damaged.

• Houses and aligns the user interface display and buttons on the control panel
• Shields internal components from dust and minor splashes
• Restores a secure fit and clean, finished look
• Typical symptoms: cracked or broken bezel, missing/broken tabs, loose fit, sticking or misaligned buttons

• Disconnect power to the appliance before servicing
• Use a non-marring pry tool to release retaining tabs; remove any mounting screws as needed
• Transfer any trim pieces, light guides, gaskets, or brackets from the old cover to the new assembly
• Support wiring and the display board during removal/installation to avoid damage

The Ice Dispenser Door Lever is an OEM part for LG refrigerators. This part is responsible for operating the ice dispenser door, allowing ice to be dispensed from the ice maker when the lever is pressed.

Causes of a bad part can include mechanical wear and tear from repeated use, physical damage or impact, or issues with the internal mechanisms that control the lever's motion.

Symptoms of a bad Ice Dispenser Door Lever include:

• Failure of the ice dispenser door to open when the lever is pressed
• The door opening erratically or becoming stuck
• Difficulty in dispensing ice due to the improper operation of the door

This OEM LG part is also compatible with some Kenmore models.

The Fan Motor Assembly is an OEM part for LG refrigerators. This part circulates air throughout the refrigerator compartments to maintain consistent and optimal temperatures. Note: This fan motor has a smaller secondary wire harness with a 3-wire connector. If your unit has a 4-wire connector, order part# ABA72913426.

Causes of a bad fan motor assembly can include electrical malfunctions, wear and tear from regular use, or damage due to debris or obstruction. 

Symptoms of a bad fan motor assembly include:

• The refrigerator or freezer compartments not cooling properly
• Unusual noises coming from the fan area
• The fan not running or spinning intermittently
• Increased frost buildup in the freezer compartment

This OEM LG part is also compatible with Sears/Kenmore models.

The Ice Maker Assembly is an OEM replacement part for LG refrigerators. It contains the complete ice-making components including the ice tray, ejector mechanism, and fill tube. 

Causes of a bad Ice Maker Assembly can include issues with proper ice ejection, ice cube size or shape inconsistencies, decreased ice production over time, mineral or sediment buildup affecting performance, or wear and tear from extended use.  

Symptoms include:

• Incomplete or inconsistent ice filling of the ice tray 
• Cracked, pitted, or misshapen ice cubes
• Ice cubes not ejecting from the tray properly
• Slowed or ceased ice production

This OEM LG ice maker assembly is also compatible with some Kenmore refrigerator models. 

Replace a cracked or missing door basket to restore organized, secure storage on your refrigerator door. This bin mounts to the inner door to hold bottles and condiments so items stay put when you open and close the door. What it does:

• Mounts to the door to hold beverages, condiments, and small containers
• Replaces a broken, loose, or missing bin to restore proper fit
• Helps keep items upright and seated on the door tabs when properly installed
• Refreshes the interior appearance with an intact, clean bin

• Includes: 1 refrigerator door basket

• Remove contents, lift the old bin up and off the door mounts
• Align the new basket with the door tabs and press down until fully seated
• Confirm the basket is level and secure before loading items
• Close the door slowly to verify clearance and proper engagement

The Spanner Wrench is an OEM replacement part for LG refrigerators. This tool allows you to adjust the door hinges to ensure the doors are level and aligned properly. A well-aligned door is crucial for maintaining the internal temperature and efficiency of the refrigerator, preventing energy loss and ensuring food is stored under optimal conditions.

Symptoms that you might need to adjust the door hinges and potentially need this wrench include:

• Doors not closing properly or sealing tightly
• Visible gaps between the door and the main body of the refrigerator
• The refrigerator tilting or not sitting level

This spanner wrench is also compatible with some Sears/Kenmore refrigerators. 

This turntable roller ring sits under the glass tray and allows it to rotate smoothly for even heating. Replace a worn, warped, or broken ring to restore stable rotation and consistent cooking performance.

• Supports the glass turntable and rides on built-in rollers for smooth, quiet movement
• Keeps the tray level and centered to promote even heating
• Common symptoms: tray not turning, uneven cooking, scraping/grinding noises, or a wobbly/slipping turntable
• Restores proper interaction between the turntable, drive coupling, and motor

• Unplug the microwave or switch off the breaker before servicing
• Remove the glass tray; lift out the old ring and clean the track
• Place the new ring with the rollers facing down on the track; reseat the tray on the center drive coupling
• Test rotation with a microwave-safe cup of water

This is the temperature sensor that monitors internal refrigerator temperatures and relays that information to the control board. A failing sensor can lead to erratic temperatures, warm spots, or excessive run time.

• Measures compartment temperature and feeds data to the control system
• Helps the unit maintain consistent cooling
• Failure symptoms may include inaccurate temperature readings, poor cooling, or frequent cycling
• May trigger error codes related to temperature sensing on some models

• Unplug the appliance before servicing
• Access location varies by model; panels, shelves, or liners may need removal
• Handle wiring connectors carefully and match routing/clips as original
• After replacement, allow several hours for temperatures to stabilize

The Main PCB Assembly is an OEM part for LG refrigerators. Housed inside the control housing, this circuit board directs all critical refrigerator operations from cooling and icemaking to door alarms. Precise programming maintains consistent temperatures across compartments.

Causes of a bad main PCB can include physical impact, moisture intrusion into circuit paths, or expected component degradation over time. Without proper control, the refrigerator sections cannot regulate temperatures as designed.

Symptoms of a bad main PCB include:  

• Inability to adjust temperature settings  
• Erratic cooling or icemaker performance
• Intermittent control functions and error codes
• Moisture or physical damage visible on PCB

This LG OEM replacement ensures reliable operation for years to come. Compatible also with Sears/Kenmore refrigerators, it provides a direct fit and restoration of essential cooling functions. Proper installation protects future operations.

This holder bracket replaces a damaged or missing mounting support. It secures an internal component so it stays aligned and stable, helping your appliance operate smoothly without looseness or rattling.

• Provides a rigid mounting point to hold a component or assembly in place
• Maintains alignment to reduce vibration, rubbing, and intermittent operation
• Restores support when the original bracket is cracked, warped, or missing
• Common symptoms include a loose/wobbly part, rattling noises, or visible broken tabs

• Disconnect power to the appliance before servicing
• Note the original bracket's orientation and transfer any clips or screws from the old part
• Use existing hardware and tighten fasteners evenly—do not overtighten
• Verify proper fit and alignment before restoring power

The PCB Assembly, Sub is an OEM part for LG refrigerators. It assists the main control board by regulating secondary refrigerator functions such as dispenser controls, ice makers, and temperature displays in specific refrigerator sections. Located inside exterior access panels, the sub board receives inputs and routes outputs behind refrigerator side panels and doors.

Causes of a bad sub board can include water damage to electronic components leading to shorts, as well as failure over many freeze-thaw cycles. 

Symptoms of a bad PCB Assembly, Sub include:

• Ice maker or water dispenser not operating 
• Incorrect temperature reading for sections  
• Error codes appearing on exterior display
• Buzzing or humming sounds from interior panels

This authentic LG replacement ensures all refrigerator features perform dependably. It is also suitable for Sears/Kenmore branded refrigerators containing LG mechanisms and controls. 

This adjustable leveling leg assembly supports and stabilizes your appliance by threading into the base frame. Replacing a worn or missing leg helps you level the unit for smoother, quieter operation on uneven floors.

• Provides height adjustment to level the appliance and distribute weight evenly
• Helps prevent rocking, wobbling, and excess vibration or rattling
• Can improve door alignment and smooth opening/closing when the cabinet is properly leveled
• Useful when a leg is missing, damaged, or threads are stripped

• Disconnect power; if applicable, shut off the water supply
• Use a helper to safely brace or tip the unit; protect flooring when accessing the leg
• Unthread the old leg and hand-thread the new one; tighten as needed
• Adjust front-to-back and side-to-side until stable; all legs bear weight evenly

This is a ring intended for use in refrigerators. The ring is used to adjust the height of the door. Genuine OEM replacement rings are necessary for the repair to ensure a proper fitting.If the refrigerator door no longer opens or closes easily, or if it is not sealing properly, the rings may need to be replaced. Visual inspection can determine if there are problems with the refrigerator door rings. Make sure to unplug the device before starting any of the disassemblies of the machine. Wear gloves.This ring is an authentic OEM replacement part. It is sold as an individual unit. The ring is made of high-quality, durable materials. The replacement piece is sourced directly from the manufacturer. It can be installed in several models of refrigerators. The genuine OEM replacement ring is compatible with refrigerators produced by both LG and Kenmore.

Designed specifically for use on a refrigerator unit, this part is a control board. The component manages all of the refrigerator's functions, including the cooling and defrosting times, the lights, and the ice and water dispenser. If the refrigerator functions stop working, it is likely that the control board is faulty. If the refrigerator is not keeping cool, is not dispensing ice or water, if not defrosting, or if the lights are not turning on, it is likely that the control board has gone bad. It is important that the refrigerator is unplugged before replacing this part. Some people may want to wear work gloves to protect their hands during the replacement process.This control board is compatible with refrigerators that are manufactured by the LG brand. It is sold individually as a high-quality and durable part. It is sourced directly from the manufacturer as a genuine OEM part.

The Magnet Switch is an OEM part for LG refrigerators. It plays an important role in monitoring the position of the refrigerator door. 

The magnet switch works together with a magnet installed in the door gasket to detect when the door is opened or closed. It communicates this information to the control board which uses it to manage temperatures and fan speeds accordingly. 

Causes of a bad magnet switch can include wear and tear over time, physical damage, or failure of internal components. 

Symptoms of a bad magnet switch include:

• Improper cooling and freezing performances 
• Inability to detect when the door is opened
• Erratic temperature fluctuations
• Errors codes relating to door sensors

This genuine OEM LG magnet switch restores the door monitoring functions of your refrigerator. It is also compatible with Sears/Kenmore refrigerator models.