Lren6325xe Parts

Oven rack for electric and gas ranges. Provides stable surface for cookware during cooking. Replace if bent, warped, cracked, or missing.

If your range won't heat, displays error codes, or shuts off randomly, the power control board may have failed. Restores normal oven and cooktop operation.

Burner not heating or won't turn off? This radiant surface element sits beneath the glass cooktop and restores fast, even heating. DIY-friendly repair.

This sheath heater is the electric element that delivers radiant heat for the unit's heating cycles, such as grill/broil or convection. Replacing a failed heater restores proper temperature performance and consistent results.

• Generates radiant heat when energized to help reach and maintain set temperature
• Supports grill/broil or convection functions for browning and even cooking
• Common failure signs: no heat in those modes, extended preheat times, uneven results, tripped breaker, or a visibly blistered/broken element
• Restores reliable heating performance when the original element is open or shorted

• Disconnect power and let components cool before servicing
• If servicing a microwave, remember high-voltage components can retain a dangerous charge; discharge the capacitor and consider service if you're not experienced
• Handle the element by its brackets; avoid bending the sheath or stressing terminals
• Move wires one at a time to the new part and verify element continuity with a multimeter before reassembly

If your range won't heat properly or controls are unresponsive, the main control board may have failed. This assembly coordinates all oven functions.

This sheath-style heater delivers controlled heat during your appliance's defrost or heating cycle. Replacing a failed element restores proper temperature performance, avoiding issues like weak/no heat, extended run times, or frost accumulation where defrost heat is applied.

• Provides focused heat for defrost or heating functions as engineered by the manufacturer
• Typical failure symptoms: no or weak heat, uneven temperatures, frost/ice buildup in areas that should defrost, longer run times, or related error codes
• Helps maintain stable performance and efficiency by delivering the required heat at the right time

• Disconnect power and allow hot components to cool before servicing
• Access the heater per your model's service manual; take photos of routing and clips before removal
• Avoid bending adjacent tubing, coils, or brackets; transfer any clips or shields from the original part
• Ensure all electrical connectors are fully seated; restore power and monitor operation

The Membrane Switch Assembly is the touch keypad for your appliance's control panel. It relays button presses to the electronic control, restoring reliable input when keys stop responding or a "stuck key" error prevents selecting functions.

• Provides the printed keypad used to choose settings and start/stop
• Sends each key press through its flat ribbon lead to the control board
• Common fix for unresponsive or intermittent buttons
• Can resolve "stuck key"/keypad error beeps or messages
• Useful when the display lights but buttons do not respond

• Disconnect power to the appliance before servicing.
• Access the control panel; note screw and clip locations for reassembly.
• Handle the ribbon connector carefully—do not crease it and seat it fully.
• If servicing a microwave, internal high-voltage components can retain a charge even unplugged.

Burner won't heat or heats inconsistently? This radiant surface element mounts under the glass cooktop. DIY-friendly repair, typically 45 minutes.

This part is the radiant heater intended for use on ranges. This part is also referred to as a surface element. It supplies the heat required to cook food. This particular radiant heater is the largest element on the cooktop. In the event that the burner is not heating up, this part may need to be replaced as there could be an element that is burned out. It may begin to heat up but won't get hot enough to cook correctly. The cook may also notice that the element does not cook evenly. There could also be physical signs of damage. Be sure to unplug the range prior to attempting to repair or replace this part.This particular radiant heater is compatible with appliances manufactured by the LG brand. It is sold individually. This part comes straight from the manufacturer.

Fix range power issues or control board failures with this terminal block connector. Provides secure wire connections for electrical components. Moderate DIY repair.

This idler bracket secures the idler in the drive system, keeping the belt aligned and properly tensioned for smooth operation. Replacing a bent or worn bracket helps reduce noise and restore consistent belt tracking.

• Holds the idler in position to maintain proper belt tension and alignment
• Helps prevent belt slippage, squealing, or scraping noises
• A bent, cracked, or loose bracket can cause the belt to come off or loss of drive motion
• Visible wear or misalignment around the idler mount is a common replacement indicator

• Disconnect electrical power; if applicable, shut off gas supply before servicing
• Access the drive system and relieve belt tension before removal
• Transfer the idler pulley and spring (if applicable) to the new bracket
• Reinstall in the original orientation and verify correct belt routing and alignment before test run

Oven not heating or cooking unevenly? This heating element generates the heat needed to cook food. Common fix for temperature issues in electric ovens.

Burner won't heat or heats unevenly? This radiant surface element mounts under your glass cooktop to restore consistent heating. DIY-friendly repair.

Replaces cracked, broken, or unresponsive touch pad control panel on your range. Installs at the front of the cooktop to restore touch control functionality.

This radiation heater is the element that delivers direct radiant heat for the microwave's grill/browning feature. Replacing a failed heater restores proper grilling performance and helps foods brown and crisp during grill or combination-cook settings. What it does:

• Supplies radiant heat for grill/browning and combo-cook modes
• Typically mounted at the top of the cavity to radiate heat downward
• Common failure symptoms: no heat in grill mode, element does not glow, poor or uneven browning
• Visual clues can include cracks, blistering, or burnt spots on the heater

• 1 radiation heater element

• Disconnect power before servicing; microwaves contain high-voltage components that can retain a charge even when unplugged
• Access may require removing the outer case and interior shroud; beware of sharp metal edges
• Note wire positions before removal; route leads away from hot or moving parts during reassembly
• Verify secure mounts and connections before testing the grill function

Replace your burned-out or dim oven light bulb to restore interior visibility while cooking. Direct-fit incandescent lamp for safe food monitoring. Verify fit with your model number.