Lse806aee Parts

This front panel is the outer trim piece that restores the appliance's appearance and protects the controls and display area from dirt and damage. It gives a clean, finished look to the unit's control area. What it does:

• Covers and protects the control area and display from spills, dust, and bumps
• Provides the finished exterior surface and screw/mount points for the control assembly
• Replaces cracked, chipped, or warped trim that affects appearance or fit
• Helps keep internal electronics shielded from incidental contact and grime

• Disconnect power to the appliance before beginning any work.
• Remove adjacent trim pieces or control assembly screws as needed to access mounting points.
• Handle the panel carefully to avoid scratches; align tabs and fasteners before tightening.
• Inspect and replace clips or foam gaskets if damaged for a secure fit.

This ring guide supports and centers the microwave oven's glass turntable so it rotates smoothly for even cooking. It replaces a cracked or worn guide to reduce wobble and noisy operation. What it does:

• Centers and supports the glass tray so it turns evenly on the roller/drive assembly
• Helps keep the tray from slipping or wobbling during rotation
• Restores smooth, quiet turntable movement when the original guide is damaged
• Addresses symptoms such as a tray that wobbles, binds, or does not rotate properly

• One ring guide

• Disconnect power before servicing the appliance
• Remove the glass tray and roller assembly to access the guide
• Set the new guide into place on the turntable support/roller path and reinstall the roller and glass tray
• Handle the glass tray carefully; replace rollers or the drive coupling if worn

This is a replacement screw used to secure appliance components and panels. It restores proper fastening where a stripped, missing, or damaged screw causes loose parts or rattling. What it does:

• Fastens panels, trim, or internal components to maintain structural fit
• Helps stop vibration-related noise from loose assemblies
• Replaces missing or corroded screws that prevent proper closures
• Restores secure mounting after repairs or disassembly

• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug—do not over-torque to prevent thread damage
• Keep small parts away from children and pets
• Disconnect power or water before accessing internal parts

A replacement control knob assembly that restores tactile control and selector function for compatible LG appliances. Easy-to-use direct-replacement knob that makes turning settings smooth and precise. What it does:

• Replaces a cracked, stripped, missing, or loose control knob to restore safe operation
• Provides a secure grip for selecting cycles, temperatures, or settings
• Helps prevent accidental setting changes caused by a damaged knob
• Matches OEM fit and basic form for straightforward replacement

• One knob assembly

• Turn off and unplug the appliance (or disconnect power) before servicing
• Pull the old knob straight off the shaft; press the new knob onto the shaft until fully seated
• If knob does not seat easily, check shaft orientation and remove any debris or retaining clips before installing

This replacement control knob assembly restores a stove or range's user control, letting you select temperature or settings with a secure, easy-turn fit. Durable OEM-style construction keeps front-panel controls functional and reliable. What it does:

• Replaces a worn, cracked, or missing control knob assembly to restore user input
• Provides a secure fit so the control shaft turns smoothly without slipping
• Helps eliminate intermittent or hard-to-turn control operation caused by damaged knobs
• Matches OEM form and function for consistent control feel

• Turn power to the appliance off before attempting any service to avoid injury
• Pull the old knob straight off the control shaft; press the new assembly onto the shaft until fully seated
• If the knob does not seat or control still slips, inspect the control shaft and shaft clip for damage and replace as needed
• Use basic hand tools;

This parts assembly replaces a damaged or worn assembly to restore proper operation and eliminate loose or broken components. Designed as a direct-fit replacement to return the appliance to normal function quickly. What it does:

• Replaces a damaged internal assembly that can cause intermittent operation or failed cycles
• Stops unusual noises or rattling caused by loose or broken parts
• Restores mechanical alignment and secure mounting where the original assembly is worn
• Helps resolve symptoms like visible damage, loose components, or inconsistent performance

• Disconnect power (and gas/water if applicable) before starting work
• Handle electrical connectors and fragile components carefully to avoid damage

The Main Control Board is an OEM part for LG refrigerators. As the central processing unit, it controls all cooling functions including temperature regulation, defrost cycles, and compressor operation.

Symptoms of a faulty main control board include:

• Inability to lower temperatures properly  
• Fluctuating temperatures within compartments
• Defrost issues causing frost to accumulate 
• Compressor running inconsistently or not at all

Causes of a bad control board can be liquid leaks over time corroding electronic components. General component wear is also possible with years of compressor operation.

This LG replacement is compatible with some Kenmore models as well.

This main control board is the appliance's primary power and logic module, managing power delivery and electronic control functions so your appliance can respond to commands and run cycles reliably. What it does

• Regulates power to motors, valves and sensors and coordinates control signals across the appliance
• Restores control-panel responsiveness when the original board has failed
• Can stop intermittent power loss, random resets or unresponsive displays caused by a faulty PCB
• Helps clear electronic faults that originate from a damaged or burned control board

• One main control board

• Disconnect power to the appliance before beginning work to avoid electric shock
• Handle the board by its edges and avoid touching components; use ESD protection if available
• Verify connector locations and board part number match the unit before installing

This replacement door handle restores a secure, easy-grip opening to your refrigerator door. It matches the OEM shape and mounting points so the door operates smoothly and looks factory-fresh. What it does:

• Replaces a cracked, loose, or broken refrigerator door handle so the door is easier and safer to open.
• Restores proper grip and leverage for normal daily use.
• Reinstalls to existing factory mounting points to maintain door alignment and appearance.
• Helps prevent further cabinet or door damage caused by using a compromised handle.

• One refrigerator door handle

• Requires removing the old handle and securing the replacement to the same factory screw bosses; use the original screws unless new hardware is explicitly listed.
• Handle hardware may be hidden under trim—check for set screws or clips before prying.
• Support the door while working to avoid strain on hinges; two-person assistance recommended for larger doors.
• Disconnect power only if required for surrounding panels—this is an exterior handle replacement and typically does not require electrical disconnection.

This sheath heater is the heating element assembly that warms air inside the dryer to remove moisture from clothes. Replaces a worn or failed heater to restore normal drying performance. What it does:

• Generates heat for the dryer's air flow so loads dry efficiently
• Commonly linked to symptoms such as no heat, cool air from the dryer, or significantly longer dry cycles
• Works with the dryer's blower and thermostat system to maintain drying temperature
• Should be tested alongside thermal fuses and thermostats when diagnosing heating problems

• One sheath heater assembly

• Disconnect all power to the appliance before beginning any repair
• Handle the heater element carefully to avoid bending or damaging the sheath
• Inspect and test associated components (thermal fuses, thermostats, wiring) for faults during replacement

This front panel is the exterior control-panel trim that restores the appliance's appearance and protects the underlying buttons and electronics from everyday wear. It gives a clean, finished look and helps keep controls sealed from spills and debris. What it does:

• Covers and protects the control area and buttons from dirt, moisture, and bumps
• Restores a damaged, cracked, or faded front surface to improve appearance
• Keeps the control electronics accessible while shielding them from direct contact
• Helps the door/control assembly align and fit properly when installed

• One front panel

• Disconnect power before servicing to avoid shock or injury
• Remove any trim screws or snaps holding the old panel; handle clips gently to avoid breaking
• Align panel tabs and secure with original hardware; do not overtighten screws
• Avoid contact with circuit boards and consider an anti-static precaution

This front panel replaces the damaged or worn outer control panel on compatible LG appliances, restoring the unit's appearance and providing a clean surface for controls and display. It helps keep internal components protected and maintains proper user access. What it does:

• Acts as the outer control surface and trim for the appliance, covering switches, buttons, and display openings
• Protects internal electronics from spills, grease, and everyday wear
• Restores a clean, professional look to the appliance when the original panel is scratched or cracked
• Helps ensure buttons and displays are properly aligned and accessible

• One front panel

• Disconnect power to the appliance before starting any work to prevent shock or injury
• Remove any trim, bezels, or fasteners securing the old panel; retain screws for reuse if appropriate
• Handle the panel carefully to avoid scratching painted or plastic surfaces during installation
• If the panel includes attached brackets or clips, verify they are seated fully before reassembling the appliance

This 4.0x16mm tapping screw secures trim and internal components on compatible appliances, providing a reliable fastener for repair or reassembly. Use the correct screw to maintain fit and function during service. What it does:

• Fastens appliance panels, brackets, and small components where a self-tapping thread is required
• Replaces stripped or missing screws that cause loose panels or rattling
• Helps restore proper alignment and secure electrical or mechanical parts
• Suitable where a 4.0 x 16mm size and tapping/sharp thread are specified

• One 4.0x16mm tapping screw (quantity: 1)

• Use the matching screw location and thread engagement; do not force a misaligned fastener
• Tighten until seated; avoid over-torquing which can strip threads or crack plastic
• Disconnect power and follow appliance safety procedures before servicing
• If screws repeatedly strip, inspect mating threads or use an approved repair insert

This customized washer is a small hardware piece that secures fasteners and helps distribute load where screws or bolts attach to appliance components. It restores proper fit and reduces movement at the connection point. What it does:

• Provides a stable bearing surface for screws or bolts to prevent pull-through and material damage
• Helps keep fasteners tight and reduces vibration-related loosening or rattling
• Maintains correct spacing and alignment of panels or internal parts
• Can help form a seal on fasteners in locations prone to vibration or minor movement

• Disconnect power and water (if applicable) before servicing the appliance
• Retain or replace the associated fastener; small parts can be easily lost—work on a clean surface