Maytag Washer Dryer Combo LSE1000T Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: 12001541
Replacement drum support roller for dryers. Installs on the drum assembly to allow smooth rotation. Replace when cracked, worn, or making noise.
Do-It-Yourself Stories from Customers like You
Dryer squealing on startup Sandy R. • Manhattan , KS • September 08, 2015
I replaced the belt, belt tension pulley, both dryer drum roller axles and both drum support rollers. Although I bought 2 tumbler bearing kits, because those still look good I am saving them for when they go bad. The videos were fantastic! I also took pictures as I went of wiring so there would be no question where things went when reassembling. It should be noted some models have extra terminals near the sensor terminals... just be aware and look closely/take pics as you are taking things...
Read more
More
$21.95
- Compare At:
-
$30.18
- You Save:
-
$8.23
Genuine Whirlpool part
By: Whirlpool
Part Number: 306508
Supports drum rotation and reduces friction. Replace when dryer squeals, rumbles, or drum sticks. Includes mounting hardware. Verify fit by model number.
Do-It-Yourself Stories from Customers like You
Dryer squealing on startup Sandy R. • Manhattan , KS • September 08, 2015
I replaced the belt, belt tension pulley, both dryer drum roller axles and both drum support rollers. Although I bought 2 tumbler bearing kits, because those still look good I am saving them for when they go bad. The videos were fantastic! I also took pictures as I went of wiring so there would be no question where things went when reassembling. It should be noted some models have extra terminals near the sensor terminals... just be aware and look closely/take pics as you are taking things...
Read more
More
$12.56
- Compare At:
-
$21.82
- You Save:
-
$9.26
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9703438
The Retaining Clip is an OEM part for Whirlpool stand mixers. This small but essential part ensures the stability and secure fitting of various mixer components, contributing significantly to the appliance's overall performance and durability. Its primary role is to hold parts in place, preventing movement that could lead to wear or malfunction during operation.
Stand mixers are subjected to a variety of stresses, particularly when mixing thick doughs or other dense mixtures. The retaining clip's integrity is vital in these situations, as it helps to maintain the correct alignment and functioning of the mixer's moving parts.
Symptoms of a bad Retaining Clip in a stand mixer include:
- Components such as beaters or attachments becoming loose or detaching during use.
- Unusual vibration or noise
- Difficulty in attaching or detaching mixer attachments
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
This part fixes the following symptoms
-
Will not tumble
-
Noisy
-
No heat or not enough heat
-
Takes too long to dry
See more...
Do-It-Yourself Stories from Customers like You
Blower wheel center hub was stripped making lots of noise when the dryer was running as it rattled on the motor shaft, drum belt was worn Michael W. • Vacaville , CA • August 30, 2021
The blower wheel had been previously “repaired,” but the repairman did not install a retaining clip or clamp, so the new part was destroyed in about a year and a half, as the motor shaft rounded all the square edges in the plastic hub. The old blower wheel came off easily and the new part was a perfect fit. The center clamp that comes with the blower wheel kit would probably hold it in place by itself, but I also purchased and installed the retaining clip (#35) as well, because the end of the...
Read more
More
$6.95
- Compare At:
-
$8.20
- You Save:
-
$1.25
Genuine Whirlpool part
By: Whirlpool
Part Number: WP303396
Dryer not heating? This high limit thermostat cuts power when temps exceed safe levels. Common fix for no heat issues. Simple DIY install in 5-10 minutes.
This part fixes the following symptoms
-
Too hot
-
No heat or not enough heat
-
Takes too long to dry
See more...
Do-It-Yourself Stories from Customers like You
Dryer was functional but not heating up John M. • Pompton Lakes , NJ • September 10, 2016
Replaced the thermostat and fuse it could have been either of them that was causing the issue - and now it works like a charm.
Read more
More
$29.95
- Compare At:
-
$40.86
- You Save:
-
$10.91
Genuine Whirlpool part
By: Whirlpool
Part Number: WP314820
Prevents lint buildup and moisture escape between drum and front panel. Replace when cracked, flaking, or separated. Confirm fit with your model number.
Do-It-Yourself Stories from Customers like You
Broken dryer drum belt in Maytag model lde8200acw Jack H. • Kent , WA • December 24, 2019
Started my Maytag dryer (model LDE8200ACW) with a large load early Saturday morning and immediately heard a noticeable thumping noise as the drum turned. Opened the door and checked to make sure some of the laundry hadn’t wadded up and was causing the thumping. Restarted it but the thumping was still present. Did a google search for obvious possible causes for the symptoms but the only suggestion that made sense was to check and make sure the dryer wasn’t rocking on its feet. Checked and found...
Read more
More
$29.95
- Compare At:
-
$35.94
- You Save:
-
$5.99
Genuine Whirlpool part
By: Whirlpool
Part Number: WP312535
The Fiber Washer is an OEM part for Whirlpool appliances. This washer provides a reliable seal and is used in various connections within the appliance to prevent leaks and ensure secure fittings. Its fiber construction offers durability and resistance to wear, making it ideal for maintaining tight seals in high-pressure or high-temperature environments.
Common causes of a bad fiber washer include degradation from water or chemical exposure, physical damage from over-tightening, and natural wear and tear.
Symptoms of a bad fiber washer include:
- Water or fluid leaks at connection points
- Loose fittings or connections
- Visible wear, cracks, or deformation of the washer
- Decreased performance of the appliance due to improper sealing
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Very concerning loud thumping noise while running our dryer. William M. • Sudbury , MA • July 20, 2019
In the past, I replaced some electronic components on our gas dryer, the solenoid and the electronic ignitor, but the rest of the dryer looked more difficult to repair if needed in the future.
I was wrong.
I went unto AppliancePartsPros.com and watched some repair videos on dryers like mine that make big thumping sounds while drying. This happened when I googled my dryer model number in an attempt to find out is capacity, because I wanted our new dryer to have the same capacity.
I found out...
Read more
More
$7.37
- Compare At:
-
$8.77
- You Save:
-
$1.40
Genuine Whirlpool part
By: Whirlpool
Part Number: WP90767
The Whirlpool screw is an OEM replacement part responsible for securing various components or parts on different types of Whirlpool appliances. The screw is designed to provide a secure and reliable fastening connection, ensuring that different parts of the appliance stay in place. It is commonly used in different locations within the appliance, such as the cabinet, panels, or other structural elements.
This part fixes the following symptoms:
- Loose or wobbly components within the appliance
- Panels or parts that are not securely attached
- Rattling or unusual noises due to loose parts
- Damaged or missing screw
The Whirlpool screw can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
Certain buttons were'not working Brent T. • Easton , MD • November 17, 2014
One day my wife went to bake something and the bake/broil buttons as well as #3, #9, and oven light ceased to work. Local repair guy came by and wanted to charge $500 to fix it....YEAH RIGHT! Did a little homework and found this website, spoke with knowledgable staff who pointed me in the right direction. Took me all of about 20 minutes to install new control panel..everything works perfect...THANKS!
p.s. In doing my research come to find Maytag did little to insulate control panel from oven...
Read more
More
$7.31
- Compare At:
-
$8.70
- You Save:
-
$1.39
Genuine Whirlpool part
By: Whirlpool
Part Number: WP33001443
This Hex Nut is a small but critical fastener used to secure brackets, panels, and internal assemblies in your appliance. Replacing a stripped, corroded, or missing nut restores a tight, rattle-free, and safe installation.
- Threads onto a matching bolt or stud to clamp parts together
- Helps maintain alignment and reduce vibration-related loosening
- Commonly used on panels, brackets, supports, and internal assemblies
- Replace when threads are damaged, hex flats are rounded, or hardware is missing
- Symptoms can include loose or rattling components or hardware that won't stay tight
What's included: One hex nut. Install notes:
- Disconnect power and, if applicable, shut off gas or water before servicing
- Use the correct-size nut driver or wrench to avoid rounding the hex
- Start the nut by hand to prevent cross-threading; tighten snugly without over-torquing
- Inspect and replace any damaged mating bolt/stud or washer for a secure repair
Do-It-Yourself Stories from Customers like You
The rollers needed to be replaced, the axles for the rollers needed to be replaced, the tension pulley roller needed to be replaced, the belt needed to be replaced Richard G. • El Paso , TX • December 18, 2018
It took me about 2 hours to take everything apart and get it back together & running again with no problems. All the parts I ordered were exactly what I needed to fix everything. Thank you all !!!
Read more
More
$5.95
- Compare At:
-
$7.14
- You Save:
-
$1.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WP33313541
Seals the gap between drum and bulkhead to maintain airflow and drying performance. Replace when worn to reduce noise and prevent snagging. Verify fit.
Do-It-Yourself Stories from Customers like You
Worn out parts over many years of use Earl K. • Big Stone Gap , VA • February 07, 2016
Ordered and replace all moveable parts to stop squeaking. Dryer performing like new!!!
Read more
More
$37.95
- Compare At:
-
$45.54
- You Save:
-
$7.59
Genuine Whirlpool part
By: Whirlpool
Part Number: Y304596
Insulates and supports electrical connections through the dryer chassis. Replace if cracked, heat-damaged, or broken to prevent shorts and restore safety.
Do-It-Yourself Stories from Customers like You
Our 35 year old maytag dryer stopped heating Chris P. • Victor , NY • August 15, 2015
I ordered all the parts necessary to replace the heating element and thermostat on a Sunday night. Appliance Parts Pros shipped on Monday AM and I received them on Wednesday. It took me 45 minutes to disassemble the dryer, replace the parts and have the dryer working again.
It should be good for another 35 years which should cover me for my needs. Thanks again to Appliance Parts Pros for having the best service and always the correct parts. I am a huge fan of your company as you never...
Read more
More
$26.21
- Compare At:
-
$31.19
- You Save:
-
$4.98
Genuine Whirlpool part
By: Whirlpool
Part Number: WPY303881
This clip and insulator assembly secures and electrically isolates a component inside a range or wall oven. It keeps the part firmly positioned while preventing shorts and heat damage, supporting accurate, safe appliance operation.
- Holds the designated component against the oven liner or chassis
- Ceramic insulator provides electrical isolation in high-heat areas
- Maintains correct spacing and alignment for reliable performance
- Replaces a missing, bent, or heat-cracked clip/insulator to stop rattles or arcing
What's included: One metal clip and one ceramic insulator Installation notes:
- Disconnect power; allow the appliance to cool fully before servicing
- Wear gloves and eye protection
- Access the mounting point; transfer the component into the new insulator and secure with the clip without pinching wires or capillary bulbs
- Restore power and verify proper operation
Do-It-Yourself Stories from Customers like You
Our 35 year old maytag dryer stopped heating Chris P. • Victor , NY • August 15, 2015
I ordered all the parts necessary to replace the heating element and thermostat on a Sunday night. Appliance Parts Pros shipped on Monday AM and I received them on Wednesday. It took me 45 minutes to disassemble the dryer, replace the parts and have the dryer working again.
It should be good for another 35 years which should cover me for my needs. Thanks again to Appliance Parts Pros for having the best service and always the correct parts. I am a huge fan of your company as you never...
Read more
More
$19.95
- Compare At:
-
$23.54
- You Save:
-
$3.59
Genuine Whirlpool part
By: Whirlpool
Part Number: WP33002917
Specs: No.8X1/2 HEX WASHER HEAD
Do-It-Yourself Stories from Customers like You
Control board shorted out during drying cycle with a series of loud popping noises creating a blackened corner of the dishwasher door a pungent electircal fire smell and tripped circuit breaker Charles L. • Concord , MA • November 01, 2014
Replaced the control board after removing the inner door liner, plastice board cover and board itself, by removing screws, working various plastic clips/tabs and unclipping wire harnesses from board. most of time was spent cleaning the black soot from the door, which had a terrible burnt electrical/plastic fire smell. Cleaned mold/scale off of as much of the door as I could while in there as well. Removing parts without breaking plastic tabs to hold the new parts was trickiest part.
Read more
More
$5.95
- Compare At:
-
$7.14
- You Save:
-
$1.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WP210720
Pop rivet secures sheet-metal panels, brackets, and burner jar lids on appliances. Replace missing, drilled-out, or damaged rivets for permanent hold.
More
$10.38
- Compare At:
-
$11.74
- You Save:
-
$1.36
Genuine Whirlpool part
By: Whirlpool
Part Number: WPY310759
This replacement screw fastens appliance panels, brackets, and components. Use it to replace missing, stripped, or rusted hardware to restore a secure fit and help reduce vibration or rattling during operation.
- Secures panels, brackets, and internal components to the cabinet or frame
- Helps prevent vibration, rattling, and misalignment from loose hardware
- Replaces a missing, rusted, or stripped original screw
- Matches the original fastener style for proper fit in specified locations
What's included: Includes one screw. Install notes:
- Disconnect power; shut off gas and water supplies before servicing
- Use the correct screwdriver or nut driver and match length/thread to the original
- Start threads by hand to avoid cross-threading; do not overtighten, especially into plastic or thin metal
Do-It-Yourself Stories from Customers like You
Timer out on washer; baffle missing on dryer Debbie S. • Converse , TX • June 10, 2017
Purchased timer and baffle, and my appliance repairman installed them.
I could get the parts cheaper than he could from his supplier; he asked me
for the Appliance Parts Pros website address!
Read more
More
$3.65
- Compare At:
-
$4.46
- You Save:
-
$0.81
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3177991
Appliance won't start or trips breaker? This ground screw secures the grounding conductor to the chassis for safe electrical connection. Simple fix.
Do-It-Yourself Stories from Customers like You
No heat Scott H. • Wellsville , PA • July 20, 2020
I ordered a new heating element and two other parts that attached to the heating element. I discovered a wire that broke off which caused the element not to work so I had to put a new female splicer on the broken wire then replaced the element and reattached the wires and everything worked.
Read more
More
$5.95
- Compare At:
-
$7.02
- You Save:
-
$1.07
Genuine Whirlpool part
By: Whirlpool
Part Number: WP6-3129480
The Dryer Drum Roller Axle is an OEM part for Whirlpool dryers. It plays a role in the dryer's operation by offering support and an axis for the drum roller to spin smoothly. This guarantees effective and balanced tumbling of clothes throughout the drying cycle.
Causes of a bad Dryer Drum Roller Axle can include prolonged use leading to wear and tear, accumulation of lint and debris causing additional friction, or improper loading of the dryer drum which can bend or strain the axle.
Symptoms of a bad Dryer Drum Roller Axle include:
- Unusual noises, such as squeaking or grinding, during the operation
- The dryer drum struggling to turn or not turning at all
- Increased vibration or shaking of the dryer unit
- Clothes taking longer to dry or not drying evenly
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
Dryer squealing on startup Sandy R. • Manhattan , KS • September 08, 2015
I replaced the belt, belt tension pulley, both dryer drum roller axles and both drum support rollers. Although I bought 2 tumbler bearing kits, because those still look good I am saving them for when they go bad. The videos were fantastic! I also took pictures as I went of wiring so there would be no question where things went when reassembling. It should be noted some models have extra terminals near the sensor terminals... just be aware and look closely/take pics as you are taking things...
Read more
More