Lsg7304aae Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

Best Seller

Genuine Whirlpool part

Dryer Drum Roller Axle

4.9 (349)

By: Whirlpool

Part Number: WP6-3129480

The Dryer Drum Roller Axle is an OEM part for Whirlpool dryers. It plays a role in the dryer's operation by offering support and an axis for the drum roller to spin smoothly. This guarantees effective and balanced tumbling of clothes throughout the drying cycle.

Causes of a bad Dryer Drum Roller Axle can include prolonged use leading to wear and tear, accumulation of lint and debris causing additional friction, or improper loading of the dryer drum which can bend or strain the axle.

Symptoms of a bad Dryer Drum Roller Axle include:

Unusual noises, such as squeaking or grinding, during the operation
The dryer drum struggling to turn or not turning at all
Increased vibration or shaking of the dryer unit
Clothes taking longer to dry or not drying evenly

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Do-It-Yourself Stories from Customers like You Dryer squealing on startup Sandy R. • Manhattan , KS • September 08, 2015

I replaced the belt, belt tension pulley, both dryer drum roller axles and both drum support rollers. Although I bought 2 tumbler bearing kits, because those still look good I am saving them for when they go bad. The videos were fantastic! I also took pictures as I went of wiring so there would be no question where things went when reassembling. It should be noted some models have extra terminals near the sensor terminals... just be aware and look closely/take pics as you are taking things... Read more

Best Seller

Genuine Whirlpool part

Washer Drain Pump

4.9 (94)

By: Whirlpool

Part Number: WP6-2022030

The Washer Drain Pump is an OEM part for Whirlpool washing machines. It is responsible for removing water from the washing machine during the drain cycle, ensuring efficient and complete water removal.

Causes of a bad drain pump can include blockages from debris or foreign objects, electrical failures, or wear and tear from regular use. Over time, these issues can impede the pump's ability to function properly.

Symptoms of a bad drain pump include:

Water not draining from the washer
Unusual noises during the drain cycle
Error codes related to draining issues
Leaks coming from the pump area

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Note: Fits 2 belt design Maytag washers. Check belts for wear; if needed order 12112425.

This part fixes the following symptoms

Will not drain

Do-It-Yourself Stories from Customers like You Did not drain faulty pump Angela T. • Madison , SD • September 08, 2014

I've never fixed a major appliance, so I was quite proud to be able to fix our washing machine. My husband likes to hire repairmen for such issues, but I like to avoid the cost if at all possible. First, I searched online for the cause of the washer not draining. Forums and youtube videos informed me that it was either a faulty pump or clogged hoses. After watching some DIY videos, I removed the front panel which revealed a fairly simple setup inside: a big tub, the motor, and a pump with two... Read more

Best Seller

Genuine Whirlpool part

Dryer Door Latch Kit

4.9 (35)

By: Whirlpool

Part Number: 306436

The Dryer Door Latch Kit is an OEM part for Whirlpool dryers. It ensures the dryer door stays securely closed during operation, allowing the dryer to function correctly and safely. This kit typically includes the latch, strike, and necessary mounting hardware for easy installation.

Causes of a bad door latch can include wear and tear from frequent use, accidental damage from forceful closing, or alignment issues due to the door being knocked out of place. A faulty latch can prevent the dryer from starting or cause it to stop mid-cycle if the door doesn't stay closed.

Symptoms of a bad dryer door latch include:

The dryer door not staying closed
The dryer not starting or stopping unexpectedly during a cycle
Difficulty in closing or latching the door
Loose or misaligned latch components

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

Door won't close

Do-It-Yourself Stories from Customers like You Female part of drier door latch broke Randy E. • Port Republic , VA • August 30, 2014

Took off front cover of drier, removed old part and just snapped in new part. Read more

Best Seller

Genuine Whirlpool part

Washer Tub Stem Seal Repair Kit

4.8 (203)

By: Whirlpool

Part Number: 6-2095720

This repair kit contains seals and components needed to fix leaks around the washer's tub mounting stem. It prevents water from escaping the wash basket area during operation. Use this kit when you notice water pooling under your washer or leaking from the tub assembly.

Do-It-Yourself Stories from Customers like You Leakage from tub seal Gabriel S. • Petaluma , CA • March 15, 2015

I ordered the tub seal and stem seal kits along with the much needed spanner wrench. After viewing the video online several times and taking notes along the way I was ready to tackle the repair. After taking everything apart, I cleaned all areas thoroughly then addressed the rusty areas and mineral deposits found in the tub. Soaking the tub in vinegar and baking soda overnight helped loosen the built up deposits enough so I could carefully scrape them off with a spatula. This was very time... Read more

Best Seller

Genuine Whirlpool part

Brake Assembly

4.7 (17)

By: Whirlpool

Part Number: WP6-2011900

The Brake Assembly is an OEM part for Whirlpool washing machines. This component plays a crucial role in stopping the washer drum from spinning at the end of the spin cycle. It ensures that the drum comes to a complete stop, allowing for safe unloading of laundry and preventing potential damage to the machine. Brake removal tool: TJ038315

Over time, the brake assembly can wear out or become damaged due to frequent use and the stresses of stopping a spinning drum. If the brake assembly fails, it can lead to issues with the washer’s spin cycle and overall performance.

Symptoms of a bad brake assembly include:

The drum not stopping quickly after the spin cycle
Loud noises or grinding sounds during or after the spin cycle
The washer shaking or vibrating excessively
Clothes remaining too wet after the spin cycle

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You After a process of elimination it turned out to be the brake assembly Ken M. • Pierson , MI • September 13, 2016

I first replaced the two drive belts and the motor springs. That didn't fix it although they did need replacing. I then replaced the two bearings and the brake assy. The washer runs like new. If you replace the brake assembly, you should also replace the bearings. It will save a tear down later on. The Maytag repairman wanted $600.00 dollars to do the job. I did it for less than $200.00. Read more

Genuine Whirlpool part

Rubber Foot

5.0 (1)

By: Whirlpool

Part Number: WPY314137

The rubber foot is an OEM replacement part for Whirlpool washing machines. This small but essential component fits beneath the leveling legs, providing stability and preventing the appliance from moving or vibrating excessively during operation. It also protects flooring surfaces from potential scratches or damage.

Symptoms of a bad Leveling Leg Pad include:

Increased vibration or noise during the wash or spin cycle
The washing machine wobbling or becoming unsteady
Visible wear, cracks, or damage to the pad

Causes of a failing Leveling Leg Pad can include wear and tear from prolonged use, exposure to moisture, or excessive weight causing deformation. Replacing worn pads helps maintain the appliance's balance and efficiency.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

For the leveling leg order W10176519.

Do-It-Yourself Stories from Customers like You Unlevel and shaking moving out of position cracked dryer igniter Steven B. • Grantsville , WV • April 26, 2016

Replaced dried crumbling rubber foot. Cleaned inside and outside of dryer before installing igniter cleared vent hose. Leveled unit installed dryer igniter. Fired it up.Runs Great Now. Read more

Genuine Whirlpool part

Injector Seal

5.0 (2)

By: Whirlpool

Part Number: WP215233

This injector seal fits the refrigerator's water injector. It restores a tight, watertight/airtight connection where the injector passes through the liner or mates to the fill tube, helping prevent leaks and frost around the opening.

Seals the injector-to-liner/fill-tube connection to stop water seepage and air leaks
Helps prevent frost/ice buildup near the injector area and fill tube freeze-ups
Addresses issues from a cracked, shrunken, or missing seal
Common symptoms: water drips at the back/freezer wall and frost near the fill opening

What's included: 1 injector seal Installation notes:

Disconnect power and shut off the water supply before servicing
Access the injector area (rear of freezer or cabinet, depending on model)
Remove the old seal; press the new seal fully and evenly into place
Reassemble, restore water/power, and check for leaks and proper fill

Do-It-Yourself Stories from Customers like You 1 water leaking on the floor at left side and 2 occasionally tub filling a number of inches when sitting Kenneth S. • San Carlos , CA • April 15, 2016

1. Sleeve for input, Injector valve, nozzle and seal for input fixed this problem. Probably the main part that was the trouble was a deformed Injector Valve which is a rubber tube with an internal retention groove at the wide part that grips the Nozzle. The Sleeve and the Nozzle are hard plastic parts that basically looked fine, but I replaced them anyway while I was in there. Additionally I replaced the rubber Seal for Input which seals the plastic input fitting to the tub just to make sure... Read more

Genuine Whirlpool part

Clamp Nut (Machine-Thread)

4.5 (2)

By: Whirlpool

Part Number: WP6-2110472

This small clamping nut secures a mating clamp or bracket so the connected component stays firmly in place. Replacing a worn, stripped, or missing nut restores a solid hold and helps prevent looseness or leaks around the secured area.

Secures a clamp or bracket to its mounting point
Restores proper clamping force when the original nut is stripped or missing
Common signs: loose clamp, rattling/vibration, clamp won't tighten, minor leaks where the clamp is used
Durable hardware replacement to maintain stable, reliable assemblies

What's included: 1 clamping nut Install notes:

Disconnect power and shut off water/gas to the appliance before service
Note clamp/bracket orientation before removal for correct reassembly
Start threads by hand to prevent cross-threading; then tighten with the appropriate tool
Do not overtighten—snug just enough to securely clamp the component

Do-It-Yourself Stories from Customers like You Maytag clothes washer always had a terrible smell Steve S. • Scott Afb , IL • January 10, 2015

I took the wash basket out of the tub to remove all the sludge and scale that had accumulated over the years. But I did not have a spanner wrench to remove the large nut holding the basket to the center shaft. No problem - I used a hammer and chisel on the ears. But didn't realize it was a LEFT HAND THREAD!! That's when the nut split in two and I had no choice but to purchase another. Long story short, it's back together and the washer doesn't smell anymore. Live and learn... Read more

Genuine Whirlpool part

Washer Water Injector (Upper)

3.5 (2)

By: Whirlpool

Part Number: WP22001187

Fix water leaking onto the floor or uneven tub filling with this upper water injector. Directs inlet water cleanly into the tub. Easy DIY replacement.

Do-It-Yourself Stories from Customers like You Broken injector Matt M. • Wheat Ridge , CO • June 28, 2019

An easy fix for the most part. I had no idea what I was doing, but glad I bought both upper and lower injectors. Not sure why these are separate parts? Cheap plastic. I did not get the hose clamp because I didn't think I would need it. You probably do, so go ahead and just order it or grab one if you have one laying around. Mine is hooked up without it for now which I'm sure I will regret later but I needed to get our washer running immediately due to a bed bug situation in our house. Read more

Genuine Whirlpool part

Spring-Timer Knob (Timer Control Knob)

By: Whirlpool

Part Number: WP211065

This spring-timer knob replaces a worn, cracked or missing timer knob so you can set and adjust the appliance's mechanical timer reliably. Simple, direct replacement that restores the user control interface. What it does:

Fits onto the appliance's mechanical timer shaft to allow setting and advancing the timer
Restores a secure grip and pointer for accurate time selection
Commonly used to fix loose, cracked, stripped, or missing timer knobs
Helps resolve inability to turn or set the mechanical timer caused by a damaged knob

What's included: Includes: one spring-timer knob Install notes:

Disconnect power to the appliance before starting any repair
Pull the old knob straight off the timer shaft; align splines and press the new knob fully onto the shaft until seated
If the knob is tight, use a proper knob puller or gentle, even leverage to avoid damaging the shaft

Genuine Whirlpool part

Water Level Switch

5.0 (1)

By: Whirlpool

Part Number: 12002304

Do-It-Yourself Stories from Customers like You Washer over filled and overflowed on floor James A. • Huntsville , TX • September 06, 2015

Replaced water level switch, washer fill to proper water level and work fine now. Read more

Genuine Whirlpool part

Screw

5.0 (1)

By: Whirlpool

Part Number: WP1163839

Specs: 10 - 16 x .375

Do-It-Yourself Stories from Customers like You Leaked water during tub fill James M. • Hampton , VA • May 15, 2017

Replaced the Injector valve, nozzle and sleeve-in using new hose clamps Read more

Genuine Whirlpool part

Leveling Feet (Adjustable)

5.0 (1)

By: Whirlpool

Part Number: W10176519

Adjustable leveling feet that restore stability and balance to your appliance by letting you fine-tune height at each corner for a flat, wobble-free install—helps reduce vibration and improve door fit and operation. What it does:

Provides adjustable height to level an appliance on uneven floors.
Eliminates rocking or wobbling that can cause vibration, noise or movement during operation.
Helps ensure doors and panels sit flush and seal properly.
Durable replacement designed for direct fit where the OEM leveling foot is specified.

What's included: One replacement leveling foot. Install notes:

Disconnect power and water before performing any work.
Support the appliance so it cannot tip—use a jack or have a helper hold it while you adjust feet.
Turn the foot to raise or lower the corner; use hand tools as needed and avoid excessive force.
After adjusting, check stability and run a short cycle to ensure vibration and alignment are resolved.

Do-It-Yourself Stories from Customers like You The siphon break got broken during our move Barb H. • Castle Rock , CO • April 15, 2017

I have a Maytag washer that is over 30 years old and still runs like a top. When the siphon break got destroyed in our move, I was able to find a replacement kit that fixed our problem. I found a video on UTube that showed us just what to do. I'm delighted I didn't have to buy a new washer since the quality of new ones doesn't hold a candle to the quality of my Maytag. Read more

Genuine Whirlpool part

Washer

5.0 (1)

By: Whirlpool

Part Number: WP314158

This small hardware washer serves as a spacer/bearing surface within appliance assemblies to distribute load and maintain proper clearance. Replacing a worn washer helps restore smooth operation and alignment of the affected control or mechanism. What it does:

Distributes fastener load and protects mating surfaces
Maintains correct spacing to prevent rubbing or binding
Provides a smooth bearing surface to reduce friction and noise
Common symptoms when worn or missing: looseness, scraping sounds, difficult or rough turning, misalignment

What's included:

1 washer

Install notes:

Disconnect power; shut off gas or water if applicable
Note the stack order and orientation before removal
Inspect the mating fastener/shaft for wear and replace related parts if damaged
Reassemble and tighten fasteners snugly—do not overtighten—then test for smooth operation

Do-It-Yourself Stories from Customers like You Dryer paddle fell off due to stripped screws Morgan D. • Woodinville , WA • July 29, 2021

This was my first ever self appliance repair. The videos provided by Appliance Parts Pros were excellent and gave me the confidence to do the work myself. My Maytag dryer model opened differently than the one in the videos. I had to remove the front panel and screwing in the paddle required reaching way back and working in a small space where I couldn't see what I was doing. It was uncomfortable but doable with a nut driver and a bit of elbow grease. The part fit perfectly and it looks good as... Read more

Genuine Whirlpool part

Motor Pulley

4.8 (13)

By: Whirlpool

Part Number: WP6-2008160

Do-It-Yourself Stories from Customers like You Washer tub would not empty Robert B. • Haddon Heights , NJ • April 30, 2018

Water was not draining on spin cycle. Opened front cover and found belt laying on the floor. After further inspection found motor pulley wheel broken. Ordered pulley and belt kit. Replaced pulley along with pump belt and tub belt. Washer is working again. Read more

Genuine Whirlpool part

Tube, Injector

By: Whirlpool

Part Number: WP215235

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Lsg7304aae Parts

Dryer Drum Roller Axle

Washer Drain Pump

Dryer Door Latch Kit

Washer Tub Stem Seal Repair Kit

Brake Assembly

Rubber Foot

Injector Seal

Clamp Nut (Machine-Thread)

Washer Water Injector (Upper)

Spring-Timer Knob (Timer Control Knob)

Water Level Switch

Screw

Leveling Feet (Adjustable)

Washer

Motor Pulley

Tube, Injector