Skip to Content
  • 2 Day Quick Delivery! 2 Day Quick Delivery!
  • 365 Day Return Policy! 365 Day Return Policy!
  • 15 million satisfied customers 15 million satisfied customers
  • Over 2.1 Million Parts In Stock Over 2.1 Million Parts In Stock
  • Repair ForumFree Tech Support!
  • Google Trusted Store Google Trusted Store

Lt7000xvwo Parts

Adjustable Buzzer Kit (Mini Buzzer)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP694419

This adjustable buzzer kit replaces a failed or noisy mini buzzer to restore audible alerts for cycles, timers and notifications. Compact design lets the appliance signal you reliably when cycles finish or need attention. What it does:

  • Produces audible tones for cycle end, timers and other appliance notifications
  • Replaces buzzers that are silent, intermittent, weak or emitting erratic beeps
  • Helps you hear and identify completed cycles and timed alerts
  • Small, mountable unit that fits behind the control panel and connects to the control board
What's included:
  • One adjustable buzzer kit
Install notes:
  • Disconnect power before servicing to avoid shock risk
  • Access may require removing the control panel; keep fasteners organized for reassembly
  • Disconnect the buzzer wiring harness or connector before removing the old unit; connect the new buzzer the same way
  • Test buzzer function with power restored before fully reassembling

Do-It-Yourself Stories from Customers like You My electric dryer wasn't heating during drying   Deborah H. • Athens , MI • January 20, 2020

I was looking for a parts sight and found yours. I started to watch all the video tutorials on each part and the "check these connections first video". Well by doing this I was able to find the source of my problem. What I thought was the heating coil not working right, ended up being the timer that was bad!!! I am so very happy with your sight and the step by step videos that were the success to being able to do this on my own. Read more

More
$71.95
Compare At:
$85.62
You Save:
$13.67

IN STOCK
Ships Today Guaranteed
Add to Cart
Wiring Harness Clip
Genuine Whirlpool part
By: Whirlpool
Part Number: WP90016

Used from harness to top.

Do-It-Yourself Stories from Customers like You A broken lid switch on my whirlpool stackable twin washer   Joseph P. • Indialantic , FL • October 25, 2016

Fixing the problem was quite simple. First, I removed the lid assembly (thanks to the diagrams supplied by AppliancePartsPros.com!). Getting the back two screws out was very difficult because I couldn't see them from the front and I could not move the unit out of the enclosed space. After some trial and error, I located the screws which were 5/16 hex head screws and removed them with a MAGNETIC nut driver. (The magnet assures that the screw will not drop down into the mechanism). Second, I... Read more

More
$9.49
Compare At:
$10.44
You Save:
$0.95

IN STOCK
Ships Today Guaranteed
Add to Cart
Washer Brake Release Cam
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8546461

Fixes grinding noise or basket won't spin issues by disengaging the brake during spin cycles. Restores smooth operation when cam wears out or breaks.

Do-It-Yourself Stories from Customers like You No spin every thing else worked made high speed ticking noise   Anthony D. • Follansbee , WV • May 12, 2015

First I looked at the many you tube vids, and there are many. appliance parts pros pretty much shows you how to deal with the parts. I changed the brake shoes and the clutch assembly which also comes with the driver cam. I also changed the metal brake operating cam. I think that brake lockup or improper brake release was the problem that broke the plastic cam driver. This was the broken plastic part making all the ticking noise. I first changed the coupling on the motor but that wasn't bad. in... Read more

More
$7.56
Compare At:
$8.32
You Save:
$0.76

IN STOCK
Ships Today Guaranteed
Add to Cart
Washer Gasket Sealer Adhesive
Genuine Whirlpool part
By: Whirlpool
Part Number: WP285195

This is a small tube of silicone-based gasket sealer used to bond and seal gaskets during washer repairs. It creates a watertight seal between mating surfaces to prevent leaks around tub components or pump housings. Use this adhesive when replacing gaskets or resealing joints where the original sealant has deteriorated and water is leaking.

More
$64.70
Compare At:
$76.99
You Save:
$12.29

IN STOCK
Ships Today Guaranteed
Add to Cart
Washer Lid Retainer Assembly
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3350152

Washer lid won't stay open, close properly, or rattles during use? This lid retainer assembly secures the lid to the cabinet for reliable latching.

Do-It-Yourself Stories from Customers like You Broken plastic lid retainer lid would not stay open   David C. • St Pete Beach , FL • September 09, 2014

Removed washer top, diagnosed problem, ordered part and made repair Read more

More
$185.95
Compare At:
$221.28
You Save:
$35.33

IN STOCK
Ships Today Guaranteed
Add to Cart
Dryer Plug Button
Genuine Whirlpool part
By: Whirlpool
Part Number: WP660975

Snap-in plug button covers access holes and fastener openings in your dryer. Replace if cracked, broken, or missing to restore a finished look.

More
$7.34
Compare At:
$8.07
You Save:
$0.73

IN STOCK
Ships Today Guaranteed
Add to Cart
External Drain Hose
Genuine Whirlpool part
By: Whirlpool
Part Number: 285666

Size: 8 foot long. This external washer drain hose is needed when there is more distance between the washer and the drain. Note: comes with 1.5" diameter clamp but hose is 1.25" in diameter; therefore you may need to order the 1.25" diameter clamp separately: WP356138

Do-It-Yourself Stories from Customers like You I was replacing the lid switch but decided to install a new vacuum break and drain hose while i was at it   Dianne Z. • Manchester , CT • May 27, 2016

Just took off the old vacuum break and put the new one on. It was very easy because the site had a video showing how and I watched it first. Read more

More
$47.41
Compare At:
$56.42
You Save:
$9.01

IN STOCK
Ships Today Guaranteed
Add to Cart
Appliance Panel Mounting Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3395530

6-20 screw secures panels, brackets, and internal components. Replace stripped, missing, or damaged screws to restore proper fit and eliminate rattling.

Do-It-Yourself Stories from Customers like You Door switch wasn't working   Gaines S. • Donna , TX • March 18, 2017

Ordered new part. watched repair instructions on UTube. repair went well. Struggled with the grommet that holds the wiring harness. Didn't see that another grommet comes with the switch and wiring harness. Read more

More
$7.56
Compare At:
$8.32
You Save:
$0.76

IN STOCK
Ships Today Guaranteed
Add to Cart
Washer Lid Switch Shield
Genuine Whirlpool part
By: Whirlpool
Part Number: WP359231

Washer won't start or stops mid-cycle? A damaged lid switch shield can expose wiring to moisture, causing safety interlock failures. Simple fix.

More
$7.34
Compare At:
$8.07
You Save:
$0.73

IN STOCK
Ships Today Guaranteed
Add to Cart
Washer Spin Tube Assembly
Genuine Whirlpool part
By: Whirlpool
Part Number: WP64208

Spin tube assembly with drive spacer, bearing, and shaft seals. Replace if washer leaks from bottom or basket doesn't spin properly. Verify fit.

Do-It-Yourself Stories from Customers like You There was a center (tub) shaft seal leak in our Maytag washing machine.   John W. • Manvel , TX • June 02, 2021

It was fairly difficult, but I watched and followed the Appliance PartsPros video and was able to get it done using the parts I purchased from APP. The leak has stopped (but I'm still watching after 5 loads). Read more

More
$154.38
Compare At:
$183.71
You Save:
$29.33

IN STOCK
Ships Today Guaranteed
Add to Cart
Skate Plate
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3946509

Includes suspension pads.

More
$97.47
Compare At:
$115.01
You Save:
$17.54

IN STOCK
Ships Today Guaranteed
Add to Cart
Appliance Spray Paint
Genuine Whirlpool part
By: Whirlpool
Part Number: 350938

Color: Gray. Size: 13 oz. can. Used for coating the dryer drum interior. Acrylic appliance paint.

Do-It-Yourself Stories from Customers like You Dryer drum completely wore off all coating   Larry W. • Ubly , MI • July 01, 2016

Completely removed dryer drum cleaned surfaces ready for paint applied paint acquired from you it did a wonderful job with one can of paint will use for a while and acquire another can of paint for second coat thank you so much for your help the whirlpool dryer drum paint was exactly what it said it would do Read more

More
$57.95
Compare At:
$69.54
You Save:
$11.59

IN STOCK
Ships Today Guaranteed
Add to Cart
Appliance Spray Paint
Genuine Whirlpool part
By: Whirlpool
Part Number: 350956

Almond. Size: 13 oz. can. Acrylic appliance paint.

Do-It-Yourself Stories from Customers like You Age no money to fix it   Ronald V. • Cape Coral , FL • August 01, 2015

Was able to match it pretty well the natural age difference was good. The delivery of the product was amazing it took less than 24 hours to get to me and that was standard shipping. Give you guys an A for great !! Read more

More
$37.45
Compare At:
$44.94
You Save:
$7.49

IN STOCK
Ships Today Guaranteed
Add to Cart
Appliance Touch-Up Paint
Genuine Whirlpool part
By: Whirlpool
Part Number: WP72107

Touch-up paint for appliances in almond color. Repairs chips, scratches, and worn spots on ovens, refrigerators, microwaves, and dryers.

Do-It-Yourself Stories from Customers like You Broken meat drawer   Jesse B. • Stow , MA • January 26, 2015

Replaced. Shippping was very fast. A good experience. Read more

More
$14.95
Compare At:
$17.94
You Save:
$2.99

IN STOCK
Ships Today Guaranteed
Add to Cart
Clutch Spring Cap (Washer)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP62646

This clutch spring cap retains and protects the clutch spring in your washer's drive/clutch assembly, maintaining proper tension. Replacing a worn or missing cap helps the clutch engage smoothly and reduces slipping and noise during spin.

  • Secures the clutch spring within the clutch assembly to prevent movement or dislodging
  • Maintains correct spring preload for consistent clutch engagement
  • Can help reduce clutch slip that appears as weak/no spin, slow spin ramp-up, or intermittent spinning
  • Common signs of trouble: rattling or scraping near the drive, burning smell, or a visibly damaged/missing cap
What's included: 1 clutch spring cap Install notes:
  • Unplug the appliance and shut off water before servicing
  • Access the clutch per your model's service procedure; removing the gearcase/transmission and clutch may be required
  • Carefully relieve spring tension and note the orientation of the spring and cap before removal
  • Inspect the spring, clutch lining, and related hardware; replace any worn components during reassembly

Do-It-Yourself Stories from Customers like You My washer wouldn't go into a spin cycle.   Joshua P. • Cohutta , GA • April 18, 2021

I bought a clutch liner kit installed it in 5 minutes now it spins faster than ever. Read more

More
$7.56
Compare At:
$8.32
You Save:
$0.76

IN STOCK
Ships Today Guaranteed
Add to Cart
Lock Nut
Genuine Whirlpool part
By: Whirlpool
Part Number: WP358160

This lock nut secures appliance components and resists loosening from vibration. Replacing a stripped, rusted, or missing nut restores a firm, reliable connection to reduce noise and prevent parts from shifting or backing off.

  • Secures brackets, shafts, pulleys, panels, or other hardware as designed by the manufacturer
  • Helps prevent fasteners from loosening due to vibration and thermal cycling
  • Common fix for rattling/vibration noises and components that work loose over time
  • Replaces damaged, rounded, or missing original nut to restore proper fit
What's included: 1 lock nut Install notes:
  • Disconnect power and shut off gas/water supplies before servicing
  • Remove the worn nut with the appropriate wrench or socket
  • Start the new nut by hand to avoid cross-threading; tighten securely—do not overtighten
  • Inspect the mating bolt/stud and any washers; replace if worn or damaged

Do-It-Yourself Stories from Customers like You Dryer drum was making one heck of a racket while running   Michael R. • Closter , NJ • January 08, 2015

The cylinder roller that supports the dryer drum was worn and needed to be replaced. I ordered the idler pulley shaft and associated parts as well since I wasn't sure if these were worn too. Watching the video on the web site gave me a good idea what was involved and where to look. It wasn't my exact model and make but provided sufficient information on what to look for. The parts were exact fits which was a great relief abd the dryer is running like new again! Read more

More
$7.56
Compare At:
$8.32
You Save:
$0.76

IN STOCK
Ships Today Guaranteed
Add to Cart
  • Over 2.1 Million Parts In Stock Over 2.1 Million Parts In Stock
  • 2 Day Quick Delivery! 2 Day Quick Delivery!
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Google Trusted Store Google Trusted Store