Lte 5243 Dqa Parts

This drain hose coupling kit connects the washer drain hose to the appliance drain outlet, restoring a secure, leak-resistant hose connection and preventing water leaks during drain cycles. What it does:

• Provides a replacement coupling to join the drain hose to the washer drain outlet
• Re-establishes a tight hose connection to reduce leaks and water damage
• Addresses symptoms such as leaking at the drain connection or a loose hose fit
• Compatible with affected Whirlpool top-load washer drain assemblies

• Unplug the appliance before servicing and work on a dry surface
• Remove the old coupling and inspect the hose and outlet for damage before installing
• Ensure the hose is fully seated and secure with the existing or supplied clamp(s)

This replacement sleeve is a small shaft bushing that helps the drum/shaft rotate smoothly and keeps moving parts aligned to reduce wear and noise. It restores proper fit where a worn sleeve causes rubbing or play. What it does:

• Acts as a bearing surface between the shaft and housing to reduce friction
• Helps prevent metal-on-metal contact that can cause squeaks or scraping noises
• Restores correct alignment to reduce wobble or uneven drum movement
• Protects surrounding seals and components from premature wear

• One sleeve

• Disconnect power before starting and follow the appliance service manual for disassembly steps
• Inspect adjacent parts (shaft, bearings, seals) and replace if worn to ensure long-term performance
• Use proper tools and keep track of fasteners; some disassembly of the drum or cabinet may be required

This drum hole plug seals an unused or service access hole in the dryer drum to help prevent clothing snags and reduce interior airflow leaks. Simple replacement restores the drum surface and helps keep items from catching. What it does:

• Covers a drum access/service hole to provide a smooth interior surface
• Prevents fabric from catching or tearing on open drum holes
• Reduces unwanted air leakage through the drum
• Helps maintain normal drum rotation contact points by keeping openings closed

• One drum hole plug

• Disconnect power to the appliance before starting any repairs
• Inspect the drum area and remove any debris before installing the plug
• Press or snap the plug into the hole until fully seated; replace if damaged or deformed

The Bracket Assembly is an OEM component specifically designed for LG electric ranges utilizing rear-mount control panels. This integral assembly securely attaches the command console within the unit cabinetry.

Causes of a bad bracket can include loosening or stripped screws no longer maintaining a tight interface, impacts warping the steel base compromising flush mounting, or corrosion where dissimilar metals contact deteriorating securing points.

Symptoms of a bad bracket assembly include: 

• Loose panel unable to be properly reinstalled  
• Scratches or abrasions from rattling components
• Drooping controls suffering misaligned activation zones  
• Detached splash guard failing to fully protect surfaces

Replace yours today with this genuine OEM LG assembly to restore a robust interface. Backed mounting flanges deliver long-term stability and compatibility when replacing Samsung, Frigidaire, or GE electric ranges requiring rear console mounting as well. 

This hinge assembly secures and lets a refrigerator or freezer door pivot smoothly, restoring proper door alignment and seal for better cooling and operation. Replaces worn, bent, or broken hinge hardware to reduce drifting or rubbing doors. What it does:

• Provides the pivot point that lets the door open and close smoothly
• Restores correct door alignment to help the gasket seal properly
• Stops door sagging, binding, or uneven gaps that can cause cold loss
• Works with the cabinet and door mounting points to maintain consistent operation

• Use basic hand tools; support the door during removal to prevent damage or injury
• Disconnect power to the appliance before making repairs when working near electrical components
• Follow OEM instructions for torque and fastener placement to ensure correct alignment

This parts assembly is a OEM-design replacement assembly that restores the appliance's original component grouping for reliable operation and serviceability. Use when a multi-piece service assembly is worn, damaged, or failing. What it does:

• Replaces the factory service assembly grouping to restore proper mechanical or electrical function.
• Addresses symptoms such as intermittent operation, visible damage, or component failure in the affected area.
• Replaces worn or broken parts that can't be repaired individually, reducing diagnostic time.
• Helps return the appliance to safe, manufacturer-intended operation when installed correctly.

• Disconnect power (unplug appliance or shut off breaker) before starting any repair.
• Basic hand tools are typically required; refer to the appliance service manual for exact procedures.
• Confirm compatibility with the appliance model before installation; consult the model's parts list.

This connector is an insulated electrical harness terminal that joins appliance wiring to restore a secure electrical connection and help prevent intermittent power or arcing. It's a direct-replacement style used on select Whirlpool appliances. What it does:

• Provides a secure, insulated connection between two wires or a wire and a component terminal.
• Helps stop intermittent power, flickering, or loss of function caused by loose or damaged terminals.
• Reduces risk of arcing and overheating at a compromised connection point.
• Matches OEM fit/shape to maintain proper routing and strain relief where applicable.

• Turn off and unplug the appliance (or shut off breaker) before inspecting or replacing electrical parts.
• Inspect surrounding wiring and terminals for heat or corrosion; replace damaged wiring as needed.
• Use proper crimping or terminal tools and secure strain relief; verify firm, no-play connections before restoring power.

This rotary timer controls cycle selection and timing for the appliance, restoring proper cycle sequencing and user-selected settings. It replaces a worn or non-responsive timer to help the unit advance through cycles as commanded. What it does:

• Rotates to select and advance program settings so the appliance runs the chosen cycles
• Sends position signals to other components so operations start and stop at the correct times
• Common symptom: selector won't stay on a chosen setting or cycles do not advance properly
• Common symptom: timer knob is hard to turn, skips positions, or is unresponsive

• Disconnect power before accessing the control console to avoid shock
• Remove console trim or panel per your model's service instructions to reach the timer
• Reuse original knob and mounting hardware; ensure proper wiring connections match original terminals

This console wire harness connects the control panel to the appliance's main wiring, restoring reliable signal and power paths so buttons, lights, and electronic controls work correctly. What it does:

• Supplies power and signal connections between the control console and the main harness
• Re-establishes button, display, and selector communication for normal operation
• Can resolve symptoms such as unresponsive buttons, intermittent control behavior, or a blank console
• Replaces damaged, frayed, or corroded wiring that causes erratic electronics

• One console wire harness

• Disconnect power to the appliance before starting any work
• Label or photo-document connector locations before removal to ensure correct reassembly
• Disconnect connectors by releasing locking tabs; avoid pulling on wires
• Route harness along original clips and channels; secure all connectors and strain reliefs

This hex nut secures fasteners on compatible Whirlpool appliances to keep panels and components held firmly in place. It's a simple replacement that stops loose parts and restores proper fit and function. What it does:

• Threads onto corresponding bolts or studs to lock panels, brackets, or assemblies.
• Stops vibration-related loosening that can cause rattling or misaligned parts.
• Helps re-secure components after service or collision damage.
• Use when the original nut is stripped, missing, or damaged.

• Disconnect power and unplug the appliance before servicing electrical components.
• Use the correct size socket or wrench to avoid rounding the nut.
• Tighten securely but do not overtighten; replace with matching thread and grade if specified by the OEM.
• If the original fastener was seized or damaged, inspect the mating bolt/stud and replace as needed.